Fuel Injector Clinic 1650cc High-Z Fuel Injector Set (ish02-1650h) - Holley Hemi
Support the fuel demands of a serious Holley Hemi performance combination with the Fuel Injector Clinic 1650cc High-Z Fuel Injector Set. Part number ish02-1650h includes eight saturated, high-impedance injectors rated at 1650cc/min (160 lbs/hr) at 43.5 PSI and approximately 1900cc/min (180 lbs/hr) at OE 58 PSI fuel pressure. With substantial flow capacity backed by excellent linearity and repeatable short pulse width operation, these injectors give tuners the precise fuel control needed for accurate calibration, strong drivability, and dependable performance in demanding high-output builds.
Fuel Injector Clinic precisely flow matches each injector set to within 1%. Every injector is individually numbered, and its results are documented on the detailed flow sheet included with the set. FIC flow tests and rates its high-performance injectors at 43.5 PSI (3 Bar) and 90 degrees F fuel temperature using CF-16B calibration fluid. Superior short pulse width control and tight manufacturing tolerances help make the ish02-1650h predictable to tune while delivering the fuel volume required by serious Holley Hemi combinations.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: ish02-1650h
- Application: Holley Hemi
- Injector Quantity: 8
- Injector Type: Saturated / High Impedance (High-Z)
- Flow Rate at 43.5 PSI: 1650cc/min (160 lbs/hr)
- Flow Rate at OE 58 PSI: 1900cc/min (180 lbs/hr)
- Test Pressure: 43.5 PSI (3 Bar)
- Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Flow Matching: Precisely matched to within 1%
- Injector Identification: Individually numbered
- Flow Documentation: Detailed injector flow sheet included
- Solder-In Pigtails: PGTJETR8Q
- EV1 Connection: Direct connection option available
- EV6 Connection: Direct connection option available
- Multec II Connection: Requires PADPJtoGM8 adaptor
- O-Rings: Required application-specific O-rings included
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Eight 1650cc/min high-performance fuel injectors for Holley Hemi applications
- Flows 160 lbs/hr at 43.5 PSI fuel pressure
- Flows approximately 1900cc/min, or 180 lbs/hr, at OE 58 PSI fuel pressure
- Saturated, high-impedance High-Z injector design
- High-flow capacity for demanding performance fuel systems
- Excellent linearity for consistent and predictable fuel delivery
- Superior short pulse width control and repeatability
- Precisely flow matched to within 1%
- Each injector is individually numbered with results supplied on a detailed flow sheet
- Flow tested at 43.5 PSI and 90 degrees F using CF-16B calibration fluid
- Tight manufacturing tolerances support predictable tuning and strong drivability
- Brand-new, unused injectors rather than remanufactured or core-program injectors
- Multiple connector configurations available for different wiring harness setups
- Required O-rings included for the intended application configuration
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
Injector Plug and Wiring Options
The ish02-1650h is currently available with multiple connection options to accommodate different wiring harness configurations. PGTJETR8Q solder-in pigtails are available for installations requiring replacement connectors. Fuel Injector Clinic also offers direct EV1 and direct EV6 connection configurations. Multec II applications require the PADPJtoGM8 adaptor. Choosing the appropriate configuration allows the injector connection to be matched to the requirements of your specific harness.
Fuel Injector Clinic supplies brand-new, unused injectors for its performance applications rather than relying on remanufactured or core-program injectors. For aftermarket fuel systems, custom installations, or other non-standard setups, contact Beefcake Racing before ordering to confirm the correct injector and connector configuration for your combination.
Fitment
- Holley Dodge Hemi EFI intake manifold applications
FAQs
How much does the Fuel Injector Clinic ish02-1650h flow at 43.5 PSI and 58 PSI?
The ish02-1650h is rated at 1650cc/min, or 160 lbs/hr, at 43.5 PSI (3 Bar). At OE 58 PSI (4 Bar) fuel pressure, the injectors flow approximately 1900cc/min, or 180 lbs/hr.
What wiring options are available for the ish02-1650h?
Fuel Injector Clinic currently offers PGTJETR8Q solder-in pigtails, direct EV1 and direct EV6 connection options, and a Multec II configuration using the PADPJtoGM8 adaptor. Confirm the connector required by your specific wiring harness before ordering.
Order Your Fuel Injector Clinic Injectors from Beefcake Racing
When your Holley Hemi combination demands 1650cc injectors, proper injector sizing and connector configuration are critical to getting the fuel system right. Beefcake Racing can help you confirm that the Fuel Injector Clinic ish02-1650h is properly configured for your combination before you order. For product questions or help selecting the correct injectors, email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
