Fuel Injector Clinic 1200cc High-Z Fuel Injector Set (ish02-1200h) - Holley Hemi
Step up the fuel capacity of your Holley Hemi performance combination with the precision and control of the Fuel Injector Clinic 1200cc High-Z Fuel Injector Set. Part number ish02-1200h includes eight saturated, high-impedance injectors rated at 1200cc/min (110 lbs/hr) at 43.5 PSI and approximately 1350cc/min (130 lbs/hr) at OE 58 PSI fuel pressure. With excellent linearity and repeatable short pulse width operation, these injectors provide the predictable fuel delivery tuners need for accurate calibration, strong drivability, and dependable performance in demanding Hemi builds.
Fuel Injector Clinic precisely flow matches each injector set to within 1%. Every injector is individually numbered, and its results are documented on the detailed flow sheet included with the set. FIC flow tests and rates its high-performance injectors at 43.5 PSI (3 Bar) and 90 degrees F fuel temperature using CF-16B calibration fluid. Superior short pulse width control and tight manufacturing tolerances help make the ish02-1200h predictable to tune while providing substantial fuel capacity for high-performance Holley Hemi applications.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: ish02-1200h
- Application: Holley Hemi
- Injector Quantity: 8
- Injector Type: Saturated / High Impedance (High-Z)
- Flow Rate at 43.5 PSI: 1200cc/min (110 lbs/hr)
- Flow Rate at OE 58 PSI: 1350cc/min (130 lbs/hr)
- Test Pressure: 43.5 PSI (3 Bar)
- Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Flow Matching: Precisely matched to within 1%
- Injector Identification: Individually numbered
- Flow Documentation: Detailed injector flow sheet included
- Solder-In Pigtails: PGTJETR8Q
- EV1 Connection: Direct connection option available
- EV6 Connection: Direct connection option available
- Multec II Connection: Requires PADPJtoGM8 adaptor
- O-Rings: Required application-specific O-rings included
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Eight 1200cc/min high-performance fuel injectors for Holley Hemi applications
- Flows 110 lbs/hr at 43.5 PSI fuel pressure
- Flows approximately 1350cc/min, or 130 lbs/hr, at OE 58 PSI fuel pressure
- Saturated, high-impedance High-Z injector design
- Excellent linearity for consistent and predictable fuel delivery
- Superior short pulse width control and repeatability
- Precisely flow matched to within 1%
- Each injector is individually numbered with results supplied on a detailed flow sheet
- Flow tested at 43.5 PSI and 90 degrees F using CF-16B calibration fluid
- Tight manufacturing tolerances support predictable tuning and excellent drivability
- Brand-new, unused injectors rather than remanufactured or core-program injectors
- Multiple connector configurations available to accommodate different wiring harness setups
- Required O-rings included for the intended application configuration
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
Injector Plug and Wiring Options
The ish02-1200h is currently available with multiple connection options to accommodate different wiring harness configurations. PGTJETR8Q solder-in pigtails are available for installations requiring replacement connectors. Fuel Injector Clinic also offers direct EV1 and direct EV6 connection configurations. Multec II applications require the PADPJtoGM8 adaptor. Choosing the appropriate configuration allows the injector connection to be matched to the requirements of your specific harness.
Fuel Injector Clinic supplies brand-new, unused injectors for its performance applications rather than relying on remanufactured or core-program injectors. For aftermarket fuel systems, custom installations, or other non-standard setups, contact Beefcake Racing before ordering to confirm the correct injector and connector configuration for your combination.
Fitment
- Holley Dodge Hemi EFI intake manifold applications
FAQs
How much does the Fuel Injector Clinic ish02-1200h flow at 43.5 PSI and 58 PSI?
The ish02-1200h is rated at 1200cc/min, or 110 lbs/hr, at 43.5 PSI (3 Bar). At OE 58 PSI (4 Bar) fuel pressure, the injectors flow approximately 1350cc/min, or 130 lbs/hr.
What wiring options are available for the ish02-1200h?
Fuel Injector Clinic currently offers PGTJETR8Q solder-in pigtails, direct EV1 and direct EV6 connection options, and a Multec II configuration using the PADPJtoGM8 adaptor. Confirm the connector required by your specific wiring harness before ordering.
Order Your Fuel Injector Clinic Injectors from Beefcake Racing
Proper injector sizing and connector configuration are critical to getting consistent fuel delivery from a high-performance Holley Hemi combination. Beefcake Racing can help you confirm that the Fuel Injector Clinic ish02-1200h is properly configured for your fuel system before you order. For product questions or help selecting the correct injectors, email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
