Fuel Injector Clinic 1000cc High-Z Fuel Injector Set (ish02-1000h) - Holley Hemi
Give your Holley Hemi performance combination the precise fuel delivery and increased flow capacity it needs with the Fuel Injector Clinic 1000cc High-Z Fuel Injector Set. Part number ish02-1000h includes eight saturated, high-impedance injectors rated at 1000cc/min (95 lbs/hr) at 43.5 PSI and approximately 1160cc/min (110 lbs/hr) at OE 58 PSI fuel pressure. Excellent linearity and repeatable short pulse width operation provide the control tuners need for accurate calibration, responsive drivability, and consistent performance throughout the operating range.
Fuel Injector Clinic precisely flow matches each injector set to within 1%. Every injector is individually numbered, with its results documented on the detailed flow sheet supplied with the set. FIC flow tests and rates its high-performance injectors at 43.5 PSI (3 Bar) and 90 degrees F fuel temperature using CF-16B calibration fluid. Superior short pulse width control and tight manufacturing tolerances help make the ish02-1000h predictable to tune while providing the fuel capacity required by serious Holley Hemi performance combinations.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: ish02-1000h
- Application: Holley Hemi
- Injector Quantity: 8
- Injector Type: Saturated / High Impedance (High-Z)
- Flow Rate at 43.5 PSI: 1000cc/min (95 lbs/hr)
- Flow Rate at OE 58 PSI: 1160cc/min (110 lbs/hr)
- Test Pressure: 43.5 PSI (3 Bar)
- Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Flow Matching: Precisely matched to within 1%
- Injector Identification: Individually numbered
- Flow Documentation: Detailed injector flow sheet included
- Solder-In Pigtails: PGTUSC8
- EV6 Connection: Direct connection option available
- EV1 Plug-and-Play Adaptor: PADPUtoJ8
- Multec II Plug-and-Play Adaptor: PADPUtoGM8
- O-Rings: Required application-specific O-rings included
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Eight 1000cc/min high-performance fuel injectors for Holley Hemi applications
- Flows 95 lbs/hr at 43.5 PSI fuel pressure
- Flows approximately 1160cc/min, or 110 lbs/hr, at OE 58 PSI fuel pressure
- Saturated, high-impedance High-Z injector design
- Excellent linearity for consistent and predictable fuel delivery
- Superior short pulse width control and repeatability
- Precisely flow matched to within 1%
- Each injector is individually numbered with results supplied on a detailed flow sheet
- Flow tested at 43.5 PSI and 90 degrees F using CF-16B calibration fluid
- Tight manufacturing tolerances support predictable tuning and excellent drivability
- Brand-new, unused injectors rather than remanufactured or core-program injectors
- Multiple connector options available for different wiring harness configurations
- Required O-rings included for the intended application configuration
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
Injector Plug and Wiring Options
The ish02-1000h is available with multiple connection options for different wiring harness configurations. PGTUSC8 solder-in pigtails can be used to replace the existing injector connectors. Fuel Injector Clinic also offers a direct EV6 connection option, PADPUtoJ8 plug-and-play adaptors for EV1 connections, and PADPUtoGM8 plug-and-play adaptors for Multec II connections. Selecting the appropriate option allows the injector connection to be matched to the requirements of your specific harness.
Fuel Injector Clinic supplies brand-new, unused injectors for its performance applications rather than relying on remanufactured or core-program injectors. For aftermarket fuel systems, custom installations, or other non-standard setups, contact Beefcake Racing before ordering to confirm the correct injector and connector configuration for your combination.
Fitment
- Holley Hemi applications
FAQs
How much does the Fuel Injector Clinic ish02-1000h flow at 43.5 PSI and 58 PSI?
The ish02-1000h is rated at 1000cc/min, or 95 lbs/hr, at 43.5 PSI (3 Bar). At OE 58 PSI (4 Bar) fuel pressure, the injectors flow approximately 1160cc/min, or 110 lbs/hr.
What wiring options are available for the ish02-1000h?
Fuel Injector Clinic offers PGTUSC8 solder-in pigtails, a direct EV6 connection option, PADPUtoJ8 plug-and-play adaptors for EV1 connections, and PADPUtoGM8 plug-and-play adaptors for Multec II connections. Confirm the connector required by your specific wiring harness before ordering.
Order Your Fuel Injector Clinic Injectors from Beefcake Racing
Proper injector sizing and connector configuration are critical when building a high-performance Holley Hemi fuel system. Beefcake Racing can help you confirm that the Fuel Injector Clinic ish02-1000h is the right injector configuration for your combination before you order. For product questions or help selecting the correct injectors, email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
