Fuel Injector Clinic 1440cc High-Z Fuel Injector Set (ish01-1440h) - Holley GM and Ford
Give your high-performance Holley GM or Ford fuel system the flow capacity and precise fuel control it needs with the Fuel Injector Clinic 1440cc High-Z Fuel Injector Set. Part number ish01-1440h includes eight saturated, high-impedance injectors rated at 1440cc/min (140 lbs/hr) at 43.5 PSI and approximately 1700cc/min (160 lbs/hr) at OE 58 PSI fuel pressure. Excellent linearity and repeatable short pulse width operation help deliver the predictable fueling tuners need for strong drivability while providing substantial fuel capacity for serious performance combinations.
Fuel Injector Clinic precisely flow matches each injector set to within 1%. Every injector is individually numbered, and its results are documented on the detailed flow sheet supplied with the set. FIC flow tests and rates its high-performance injectors at 43.5 PSI (3 Bar) and 90 degrees F fuel temperature using CF-16B calibration fluid. Superior short pulse width control and tight manufacturing tolerances make the ish01-1440h easier to tune while maintaining consistent fuel delivery throughout the operating range.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: ish01-1440h
- Application: Holley GM and Ford
- Injector Quantity: 8
- Injector Type: Saturated / High Impedance (High-Z)
- Flow Rate at 43.5 PSI: 1440cc/min (140 lbs/hr)
- Flow Rate at OE 58 PSI: 1700cc/min (160 lbs/hr)
- Test Pressure: 43.5 PSI (3 Bar)
- Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Flow Matching: Precisely matched to within 1%
- Injector Identification: Individually numbered
- Flow Documentation: Detailed injector flow sheet included
- Solder-In Pigtails: PGTUSC8
- EV6 Connection: Direct connection option available
- EV1 Plug-and-Play Adaptor: PADPUtoJ8
- Multec II Plug-and-Play Adaptor: PADPUtoGM8
- O-Rings: Required application-specific O-rings included
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Eight 1440cc/min high-performance fuel injectors
- Flows 140 lbs/hr at 43.5 PSI fuel pressure
- Flows approximately 1700cc/min, or 160 lbs/hr, at OE 58 PSI fuel pressure
- Saturated, high-impedance High-Z injector design
- Excellent linearity for consistent and predictable fuel delivery
- Superior short pulse width control and repeatability
- Precisely flow matched to within 1%
- Each injector is individually numbered with results supplied on a detailed flow sheet
- Flow tested at 43.5 PSI and 90 degrees F using CF-16B calibration fluid
- Tight manufacturing tolerances support predictable tuning and excellent drivability
- Brand-new, unused injectors rather than remanufactured or core-program injectors
- Multiple wiring connection options available to accommodate different harness configurations
- Required O-rings included for the intended application configuration
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
Injector Plug and Wiring Options
The ish01-1440h is available with multiple connection options for different wiring harness configurations. PGTUSC8 solder-in pigtails can be used to replace the existing injector connectors. FIC also offers a direct EV6 connection option, a PADPUtoJ8 plug-and-play adaptor for EV1 connections, and a PADPUtoGM8 plug-and-play adaptor for Multec II connections. The adaptor options allow the appropriate connection to be made without cutting or soldering the vehicle harness.
Fuel Injector Clinic supplies brand-new, unused injectors for its performance applications rather than relying on remanufactured or core-program injectors. For aftermarket fuel systems, custom installations, or other non-standard setups, contact Beefcake Racing before ordering to confirm the correct injector and connector configuration for your combination.
Fitment
- Holley GM applications
- Holley Ford applications
FAQs
How much does the Fuel Injector Clinic ish01-1440h flow at 43.5 PSI and 58 PSI?
The ish01-1440h is rated at 1440cc/min, or 140 lbs/hr, at 43.5 PSI (3 Bar). At OE 58 PSI (4 Bar) fuel pressure, the injectors flow approximately 1700cc/min, or 160 lbs/hr.
What wiring options are available for the ish01-1440h?
Fuel Injector Clinic offers PGTUSC8 solder-in pigtails, a direct EV6 connection option, PADPUtoJ8 plug-and-play adaptors for EV1 connections, and PADPUtoGM8 plug-and-play adaptors for Multec II connections. Confirm the connector used by your specific harness before ordering.
Order Your Fuel Injector Clinic Injectors from Beefcake Racing
Correct injector sizing and configuration are critical to getting consistent fuel delivery from a high-performance combination. Beefcake Racing can help you confirm that the Fuel Injector Clinic ish01-1440h is properly configured for your Holley GM or Ford fuel system before you order. For product questions or help selecting the correct injectors, email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
