Fuel Injector Clinic 2150cc Fuel Injector Set - High Z (is907-2150h) - 2004-2013 Porsche 997 Turbo
Take the fuel system in your Porsche 997 Turbo to serious power levels with the Fuel Injector Clinic is907-2150h 2150cc High-Z fuel injector set. This complete six-injector package delivers massive 2150cc/min fuel capacity while retaining the short pulse width control needed for precise tuning, idle quality, and part-throttle operation. Fuel Injector Clinic uses dynamic Data Match Technology specifically to improve control of these large-flow injectors in the sub-2ms pulse width range, giving high-horsepower builds the fuel volume they demand without treating low-speed drivability as an afterthought.
Each injector is individually serial numbered, with detailed flow matching and latency information supplied on the included Data Match Sheet. Fuel Injector Clinic flow tests and rates these injectors at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid. The set includes PGT DEN6 solder-in pigtails for the required injector plug conversion, while optional PADPDtoJ6S plug-and-play adapters allow installation without cutting or soldering the factory harness. O-rings required for the listed factory application are included, and the injectors are backed by Fuel Injector Clinic's lifetime warranty against failure caused by defects in original manufacture.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is907-2150h
- Application: Porsche 997 Turbo
- Injector Flow Rate: 2150cc/min
- Injector Quantity: 6
- Injector Type: Saturated / high impedance
- Impedance: High-Z / high impedance
- Matching Technology: Fuel Injector Clinic dynamic Data Match Technology
- Flow Test Pressure: 43.5 PSI (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Pigtails: PGT DEN6
- Optional Plug-and-Play Adapters: PADPDtoJ6S
- MTBE Oxygenated Fuel Compatibility: Not compatible
- Q16 Compatibility: Not compatible
- VP Import Compatibility: Not compatible
- Alcohol-Based Fuels: Follow Fuel Injector Clinic care instructions, particularly during prolonged disuse
- O-Rings: Included for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete set of six massive 2150cc/min performance fuel injectors
- High-Z saturated injector design
- Designed for applications requiring exceptionally high fuel volume
- Dynamic Data Match Technology optimized for the large 2150cc flow rate
- Improved ECU control in the sub-2ms pulse width range typical of idle and part-throttle operation
- Superior short pulse width control helps support precise tuning and drivability
- Each injector is individually serial numbered
- Includes a detailed Data Match Sheet with flow matching and latency information
- Flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F
- Tested using CF-16B calibration fluid
- Includes PGT DEN6 solder-in pigtails for injector plug conversion
- Optional PADPDtoJ6S plug-and-play adapters eliminate the need to cut or solder the factory harness
- Includes O-rings required for the listed factory application
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
Dynamic Data Matching for a 2150cc Injector
Controlling an injector this large at low pulse widths requires more than simply increasing flow capacity. Fuel Injector Clinic uses dynamic Data Match Technology during production of the is907-2150h set because of its exceptional 2150cc/min flow rate. This matching process significantly improves the ECU's ability to control the injectors in the sub-2ms pulse width range commonly encountered during idle and part-throttle operation. Each injector is individually serial numbered, and the supplied Data Match Sheet provides detailed flow matching and latency information for accurate calibration across all six cylinders.
Critical Fuel Compatibility Information
Do not use the is907-2150h with Q16, VP Import, or other MTBE oxygenated fuels. The internal construction of the 2150cc/min injector contains a seal that can swell when exposed to MTBE. This swelling can significantly reduce injector flow, making the injector unsuitable for MTBE oxygenated fuels. Fuel Injector Clinic also advises following its care instructions when using alcohol-based fuels such as E85 because corrosion issues can potentially develop when injectors remain unused for extended periods while exposed to these fuels.
Injector Plug Conversion Options
The is907-2150h requires an injector plug conversion when installed with the factory wiring harness. Fuel Injector Clinic includes PGT DEN6 solder-in pigtails that can replace the existing injector connectors. For owners who prefer not to cut or solder the factory harness, optional PADPDtoJ6S plug-and-play adapters provide the necessary connector conversion. Fuel Injector Clinic uses brand-new, unused injectors for its performance applications rather than relying on remanufactured or core-program injectors.
Fitment
- 2004 Porsche 997 Turbo
- 2005 Porsche 997 Turbo
- 2006 Porsche 997 Turbo
- 2007 Porsche 997 Turbo
- 2008 Porsche 997 Turbo
- 2009 Porsche 997 Turbo
- 2010 Porsche 997 Turbo
- 2011 Porsche 997 Turbo
- 2012 Porsche 997 Turbo
- 2013 Porsche 997 Turbo
FAQs
Can Fuel Injector Clinic is907-2150h injectors be used with Q16 or VP Import?
No. The is907-2150h must not be used with Q16, VP Import, or other MTBE oxygenated fuels. MTBE can cause an internal seal in the 2150cc injector to swell, significantly reducing injector flow. Fuel Injector Clinic also recommends following its care instructions when these injectors are used with alcohol-based fuels such as E85.
Why does Fuel Injector Clinic use dynamic Data Match Technology on its 2150cc injectors?
The exceptionally high flow rate makes accurate low-pulse-width control especially important. Fuel Injector Clinic dynamically matches these injectors to improve ECU control in the sub-2ms pulse width range commonly encountered at idle and part throttle. Each injector is serial numbered, and detailed flow matching and latency information is supplied on the included Data Match Sheet.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing is your source for Fuel Injector Clinic injectors and supporting performance fuel system components for Porsche street and high-horsepower builds. A 2150cc injector represents a substantial increase in fueling capability, making proper injector selection, fuel compatibility, supporting fuel system components, and calibration especially important. If you have questions about the Fuel Injector Clinic is907-2150h, injector sizing, installation, or your Porsche 997 Turbo fuel system, email sales@beefcakeracing.com or call 1-855-827-7223 for assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
