Fuel Injector Clinic 1200cc Fuel Injector Set - High Z (is907-1200h) - 2004-2013 Porsche 997 Turbo
Upgrade your Porsche 997 Turbo with the Fuel Injector Clinic is907-1200h 1200cc High-Z fuel injector set, engineered to provide the additional fuel capacity demanded by modified and higher-horsepower combinations while maintaining excellent drivability. This complete set of six saturated, high-impedance ball and seat injectors combines strong flow capability with superior short pulse width control and precise injector matching, helping deliver predictable fueling from idle through high-load operation. Previously sold as is907-1100h, this injector set is now rated at 1200cc/min and features a convenient plug-and-play fit to the OEM injector harness.
Every is907-1200h set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered, and detailed flow matching and latency information is supplied on the included Data Match Sheet to give tuners valuable calibration data. FIC tests and rates these injectors at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid. O-rings required for the listed factory application are included, and every injector is backed by Fuel Injector Clinic's lifetime warranty against failure caused by defects in original manufacture.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is907-1200h
- Previous Part Number: is907-1100h
- Application: Porsche 997 Turbo
- Injector Flow Rate: 1200cc/min
- Injector Quantity: 6
- Injector Type: Saturated / high impedance ball and seat
- Impedance: High-Z / high impedance
- Connector Fitment: Plug-and-play fit to OEM harness
- Matching Technology: Fuel Injector Clinic Data Match Technology
- Flow Test Pressure: 43.5 PSI (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- O-Rings: Included for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete set of six 1200cc/min performance fuel injectors
- High-Z saturated ball and seat injector design
- Designed for increased fuel demands in modified Porsche 997 Turbo applications
- Plug-and-play fit to the OEM injector harness
- No injector plug conversion required for the listed factory application
- Excellent short pulse width control for precise low-load fueling
- State-of-the-art matching helps provide consistent fuel delivery across all six cylinders
- Precisely matched using Fuel Injector Clinic Data Match Technology
- Each injector is individually serial numbered
- Includes detailed Data Match Sheet with flow matching and latency information
- Flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid
- Includes O-rings required for the listed factory application
- Previously sold under part number is907-1100h
- Lifetime warranty against failure caused by defects in original manufacture
High-Flow Performance With Excellent Control
Adding power to a turbocharged Porsche increases fuel demand quickly, making injector capacity and controllability equally important. The is907-1200h gives the 997 Turbo substantially increased injector capacity while retaining the short pulse width control needed for strong drivability. Tight manufacturing tolerances and precise matching help make these injectors straightforward to tune while supporting smooth, predictable fuel delivery throughout the operating range.
Fuel Injector Clinic Data Match Technology
A high-flow injector set is only as useful as its consistency from cylinder to cylinder. Fuel Injector Clinic uses its proprietary Data Match Technology to precisely match the injectors within each is907-1200h set. Every injector receives an individual serial number, and the included Data Match Sheet provides detailed flow matching and latency information. This gives your tuner accurate injector-specific data while helping maintain balanced fueling across all six cylinders.
Plug-and-Play Installation
The is907-1200h is designed for plug-and-play fitment with the OEM Porsche injector harness, eliminating the plug conversion, solder-in pigtails, or separate harness adapters required by some other injector configurations. FIC also supplies the O-rings needed for the listed factory application. If your Porsche uses aftermarket fuel rails or another nonstandard fuel system configuration, contact Beefcake Racing before ordering to confirm proper injector fitment.
Fitment
- 2004 Porsche 997 Turbo
- 2005 Porsche 997 Turbo
- 2006 Porsche 997 Turbo
- 2007 Porsche 997 Turbo
- 2008 Porsche 997 Turbo
- 2009 Porsche 997 Turbo
- 2010 Porsche 997 Turbo
- 2011 Porsche 997 Turbo
- 2012 Porsche 997 Turbo
- 2013 Porsche 997 Turbo
FAQs
Is the Fuel Injector Clinic is907-1200h the same injector set previously sold as is907-1100h?
Yes. Fuel Injector Clinic identifies the is907-1200h as the current 1200cc injector set that was previously sold under part number is907-1100h. The current part number for this Porsche 997 Turbo application is is907-1200h.
Does the is907-1200h require pigtails or injector plug adapters?
No. The is907-1200h is designed for plug-and-play fitment to the OEM Porsche injector harness, so no injector plug conversion is required for the listed factory application. If your Porsche has aftermarket fuel system components or an unusual configuration, contact Beefcake Racing before ordering to verify fitment.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing is your source for Fuel Injector Clinic injectors and performance fuel system components for serious street and track builds. Choosing the right injector means matching fuel capacity, tuning requirements, and supporting hardware to your specific combination. If you have questions about the Fuel Injector Clinic is907-1200h or need help selecting the right injectors for your Porsche 997 Turbo, email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
