Fuel Injector Clinic 1000cc Fuel Injector Set - High Z (is907-1000h) - 2004-2013 Porsche 997 Turbo
Give your Porsche 997 Turbo the additional fuel capacity needed for a serious performance build with the Fuel Injector Clinic is907-1000h 1000cc High-Z fuel injector set. This complete set of six saturated, high-impedance ball and seat injectors combines increased flow capacity with excellent linearity, short pulse width control, and precise matching. The result is a performance injector package designed to deliver the consistent fueling and drivability tuners need as horsepower and fuel demand increase.
Every is907-1000h set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered, with detailed flow matching and latency information supplied on the included Data Match Sheet. FIC flow tests and rates these injectors at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid. PGTUSC6 solder-in pigtails are included for the required injector connector conversion, or optional PADPUtoJ6S plug-and-play adapters can be used to connect the injectors without cutting or soldering the factory harness.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is907-1000h
- Application: Porsche 997 Turbo
- Injector Flow Rate: 1000cc/min
- Injector Quantity: 6
- Injector Type: Saturated / high impedance ball and seat
- Impedance: High-Z / high impedance
- Matching Technology: Fuel Injector Clinic Data Match Technology
- Included Pigtails: PGTUSC6
- Optional Plug-and-Play Adapters: PADPUtoJ6S
- Flow Test Pressure: 43.5 PSI (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- O-Rings: Included for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete set of six 1000cc/min performance fuel injectors
- Saturated, high-impedance ball and seat injector design
- Increased fuel capacity for modified Porsche 997 Turbo applications
- Excellent linearity and short pulse width repeatability
- Superior short pulse width control helps maintain strong drivability
- Precisely matched using Fuel Injector Clinic Data Match Technology
- Each injector is individually serial numbered
- Includes a detailed Data Match Sheet with flow matching and latency information
- Flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid
- Includes PGTUSC6 solder-in pigtails
- Optional PADPUtoJ6S plug-and-play adapters allow installation without cutting or soldering the factory harness
- Brand-new, unused injectors rather than remanufactured or core-program injectors
- Includes O-rings required for the listed factory application
- Lifetime warranty against failure caused by defects in original manufacture
1000cc Performance With Precise Fuel Control
Making more power with a turbocharged Porsche means increasing fuel delivery without sacrificing the control needed during idle, cruising, and transient throttle operation. The is907-1000h combines 1000cc/min flow capacity with excellent linearity and short pulse width repeatability, giving tuners a predictable injector for performance-oriented 997 Turbo combinations. Tight manufacturing tolerances and precise matching help deliver consistent fuel delivery across all six cylinders while supporting the increased demands of a modified engine.
Data Match Technology
Fuel Injector Clinic's proprietary Data Match Technology goes beyond simply grouping injectors by nominal flow rating. Each injector in the is907-1000h set is individually serial numbered, precisely matched, and supplied with detailed flow matching and latency information on the included Data Match Sheet. Accurate injector data combined with consistent injector behavior gives your tuner a stronger foundation for dialing in fueling throughout the operating range.
Injector Plug Conversion
The is907-1000h requires a connector conversion when installed with the factory Porsche wiring harness. Fuel Injector Clinic includes PGTUSC6 solder-in pigtails that can be installed in place of the existing injector connectors. For owners who prefer not to cut or solder the factory harness, optional PADPUtoJ6S plug-and-play adapters connect the injectors to the existing harness without permanent wiring modifications.
Fuel Injector Clinic uses brand-new, unused injectors for its performance applications rather than relying on remanufactured or core-program injectors. The set is also configured with the O-rings required for the listed factory application. If your Porsche uses aftermarket fuel rails or another unusual fuel system configuration, contact Beefcake Racing before ordering to confirm proper injector fitment.
Fitment
- 2004 Porsche 997 Turbo
- 2005 Porsche 997 Turbo
- 2006 Porsche 997 Turbo
- 2007 Porsche 997 Turbo
- 2008 Porsche 997 Turbo
- 2009 Porsche 997 Turbo
- 2010 Porsche 997 Turbo
- 2011 Porsche 997 Turbo
- 2012 Porsche 997 Turbo
- 2013 Porsche 997 Turbo
FAQs
Does the Fuel Injector Clinic is907-1000h require an injector plug conversion?
Yes. The is907-1000h requires a connector conversion when used with the factory wiring harness. PGTUSC6 solder-in pigtails are included with the injector set. Optional PADPUtoJ6S plug-and-play adapters are available for owners who want to connect the injectors without cutting or soldering the factory harness.
How are the Fuel Injector Clinic is907-1000h injectors matched and tested?
Fuel Injector Clinic precisely matches the injectors using its proprietary Data Match Technology. Each injector is individually serial numbered, and detailed flow matching and latency information is supplied on the included Data Match Sheet. The injectors are flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing is your source for Fuel Injector Clinic injectors and performance fuel system components for serious street and track builds. Choosing the right injector means matching flow capacity, installation requirements, and supporting fuel system components to your specific combination. If you have questions about the Fuel Injector Clinic is907-1000h or need help selecting the right injectors for your Porsche 997 Turbo, email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
