Fuel Injector Clinic 775cc Fuel Injector Set - High Z (is907-0775h) - 2004-2013 Porsche 997 Turbo
Upgrade the fueling capability of your Porsche 997 Turbo with the Fuel Injector Clinic is907-0775h 775cc High-Z injector set. This complete six-injector package uses saturated, high impedance ball and seat injectors engineered for excellent linearity, consistent short pulse width operation, and the precise fuel delivery needed for properly tuned performance applications. Fuel Injector Clinic's proprietary Data Match Technology provides tightly matched injector performance across the set, helping deliver the predictable fueling and drivability that matter whether your 997 Turbo is a street car or a more aggressively modified build.
Each injector in the is907-0775h set is individually serial numbered, with matching results supplied on the included Data Match Sheet for detailed flow and latency information. Fuel Injector Clinic flow tests and rates these injectors at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid. The set includes PGT USC6 solder-in pigtails for the required injector plug conversion, or optional PADPUtoJ6S plug-and-play adapters can be added for installation without cutting or soldering the factory harness. O-rings required for the listed factory application are included, and every injector is backed by Fuel Injector Clinic's lifetime warranty against failure caused by defects in original manufacture.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is907-0775h
- Application: Porsche 997 Turbo
- Injector Flow Rate: 775cc/min
- Injector Quantity: 6
- Injector Type: Saturated ball and seat
- Impedance: High-Z / high impedance
- Matching Technology: Fuel Injector Clinic Data Match Technology
- Flow Test Pressure: 43.5 PSI (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Pigtails: PGT USC6
- Optional Plug-and-Play Adapters: PADPUtoJ6S
- O-Rings: Included for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete set of six 775cc/min performance fuel injectors
- Saturated, high impedance ball and seat injector design
- Excellent linearity and short pulse width repeatability
- Fuel Injector Clinic Data Match Technology for precise injector matching
- Each injector is individually serial numbered
- Includes a detailed Data Match Sheet with flow matching and latency information
- Flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F
- Tested using CF-16B calibration fluid
- Superior short pulse width control supports precise tuning and strong drivability
- Includes PGT USC6 solder-in pigtails for injector plug conversion
- Optional PADPUtoJ6S plug-and-play adapters eliminate the need to cut or solder the factory harness
- Includes O-rings required for the listed factory application
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
Data Match Technology for Precise Fuel Delivery
High-flow injectors need more than additional capacity to perform properly. Consistency between cylinders and predictable injector behavior are critical to getting the calibration right. Fuel Injector Clinic uses its proprietary Data Match Technology to precisely match the six injectors in the is907-0775h set. Each injector is individually serial numbered, and the supplied Data Match Sheet provides detailed flow matching and latency information to help your tuner achieve accurate and consistent fuel delivery across the engine.
Performance Fueling With Street-Friendly Control
The 775cc High-Z design combines increased fuel delivery with excellent linearity and short pulse width repeatability. That balance makes the is907-0775h a strong option for modified Porsche 997 Turbo applications that need more fueling capability while maintaining the precise low-pulse-width control required for good idle quality, part-throttle operation, and overall drivability. Tight matching also helps simplify the tuning process by providing predictable injector performance across the complete six-injector set.
Injector Plug Conversion Options
The is907-0775h requires an injector plug conversion when installed with the factory wiring harness. Fuel Injector Clinic includes PGT USC6 solder-in pigtails, allowing the existing injector connectors to be replaced. For owners who prefer not to cut or solder the factory harness, optional PADPUtoJ6S plug-and-play adapters provide a direct conversion between the injector and factory harness connectors. Fuel Injector Clinic uses brand-new, unused injectors for its performance applications rather than relying on remanufactured or core-program injectors.
Fitment
- 2004 Porsche 997 Turbo
- 2005 Porsche 997 Turbo
- 2006 Porsche 997 Turbo
- 2007 Porsche 997 Turbo
- 2008 Porsche 997 Turbo
- 2009 Porsche 997 Turbo
- 2010 Porsche 997 Turbo
- 2011 Porsche 997 Turbo
- 2012 Porsche 997 Turbo
- 2013 Porsche 997 Turbo
FAQs
Does the Fuel Injector Clinic is907-0775h require an injector plug conversion?
Yes. The set includes PGT USC6 solder-in pigtails that can be used to replace the existing injector connectors. Optional PADPUtoJ6S plug-and-play adapters are available for owners who prefer to install the injectors without cutting or soldering the factory wiring harness.
How are the is907-0775h injectors matched and tested?
Fuel Injector Clinic precisely matches the six injectors using its proprietary Data Match Technology. Each injector is individually serial numbered, and the included Data Match Sheet provides detailed flow matching and latency information. The injectors are flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing is your source for Fuel Injector Clinic injectors and supporting performance fuel system components for Porsche street and high-horsepower builds. Choosing the right injector size and matching it with the proper supporting fuel system components are critical to reliable fuel delivery, drivability, and accurate tuning. If you have questions about the Fuel Injector Clinic is907-0775h, injector sizing, installation, or your Porsche 997 Turbo fuel system, email sales@beefcakeracing.com or call 1-855-827-7223 for assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
