Fuel Injector Clinic 2150cc Fuel Injector Set - High Z (is902-2150h) - 1989-2013 Porsche 911 / 1996-2004 Boxster
When a high-horsepower Porsche build demands serious fuel volume, the Fuel Injector Clinic is902-2150h delivers it without giving up the low-pulse-width control needed for a properly tuned performance car. This set includes six massive 2150cc saturated, high impedance injectors for the listed 1989-2013 Porsche 911 and 1996-2004 Boxster applications. Designed for extremely high fuel demands, these injectors combine huge flow capacity with advanced matching technology to provide the consistency and control needed for aggressive street, track, and competition combinations.
Because injector consistency becomes especially important at this flow level, Fuel Injector Clinic uses proprietary Data Match Technology dynamic flow matching during production of the is902-2150h set. Each injector is individually serial numbered, and detailed flow matching and latency information is supplied on the included Data Match Sheet. The injectors are flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid. PGTDEN6 solder-in pigtails and the O-rings required for the listed factory application are included, while optional PADPDtoJ6S plug-and-play adapters provide an installation option without cutting or soldering the factory harness.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is902-2150h
- Applications: 1989-2013 Porsche 911 / 1996-2004 Porsche Boxster
- Injector Flow Rate: 2150cc/min
- Injector Quantity: 6
- Impedance: High-Z / high impedance
- Matching Technology: Fuel Injector Clinic Data Match Technology dynamic flow matching
- Flow Test Pressure: 43.5 PSI (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- MTBE Fuel Compatibility: Not compatible
- Do Not Use With: Q16, VP Import, or other MTBE oxygenated fuels
- Included Wiring Pigtails: PGTDEN6 solder-in pigtails
- Optional Plug-and-Play Adapters: PADPDtoJ6S
- O-Rings: Included for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Six massive 2150cc High-Z performance fuel injectors
- Extremely high fuel-flow capability for demanding high-horsepower Porsche builds
- Advanced injector technology designed to combine massive flow with precise control
- Excellent low-end throttle response for an injector of this flow capacity
- Superior short pulse width control for improved low-pulse-width fueling
- Dynamic flow matching helps improve ECU control in the sub-2ms pulse width range typical of idle and part-throttle operation
- Precisely matched using Fuel Injector Clinic Data Match Technology
- Each injector is individually serial numbered
- Included Data Match Sheet provides detailed flow matching and latency information
- Flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid
- Includes PGTDEN6 solder-in wiring pigtails
- Optional PADPDtoJ6S plug-and-play adapters eliminate the need to cut or solder the factory harness
- Includes the O-rings required for the listed factory application
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
Data Match Technology
Controlling a 2150cc injector accurately at idle and part throttle requires more than massive flow capacity. Fuel Injector Clinic uses Data Match Technology dynamic flow matching during production of the is902-2150h specifically because of the injector's high flow rate. This process significantly improves the ECU's ability to control the injectors in the sub-2ms pulse width range commonly encountered during idle and part-throttle operation. Each injector is individually serial numbered, and the included Data Match Sheet provides detailed flow matching and latency information for accurate calibration.
Important Fuel Compatibility Warning
Do not use the Fuel Injector Clinic is902-2150h with Q16, VP Import, or other MTBE oxygenated fuels. The internal construction of this 2150cc injector contains a seal that has been found to swell when exposed to MTBE. This swelling can cause a significant reduction in injector flow, making these injectors unsuitable for MTBE oxygenated fuels. Fuel Injector Clinic's care instructions should also be followed when using alcohol-based fuels such as E85 because potential corrosion issues can arise from prolonged disuse while the injectors remain exposed to alcohol-based fuel.
Wiring and Installation
The Fuel Injector Clinic is902-2150h requires an injector plug conversion when installed with the factory wiring harness. PGTDEN6 solder-in pigtails are included and can be installed in place of the existing injector plugs. Optional PADPDtoJ6S plug-and-play adapters are available for an installation that does not require cutting or soldering the factory harness.
Fuel Injector Clinic uses brand-new, unused injectors for its performance applications rather than remanufactured or core-program injectors. The is902-2150h includes the O-rings required for the listed factory application. If your Porsche uses an aftermarket fuel rail or another unusual fuel system configuration, contact Beefcake Racing before ordering to verify proper injector fitment.
Fitment
- 1989 Porsche 911
- 1990 Porsche 911
- 1991 Porsche 911
- 1992 Porsche 911
- 1993 Porsche 911
- 1994 Porsche 911
- 1995 Porsche 911
- 1996 Porsche 911
- 1997 Porsche 911
- 1998 Porsche 911
- 1999 Porsche 911
- 2000 Porsche 911
- 2001 Porsche 911
- 2002 Porsche 911
- 2003 Porsche 911
- 2004 Porsche 911
- 2005 Porsche 911
- 2006 Porsche 911
- 2007 Porsche 911
- 2008 Porsche 911
- 2009 Porsche 911
- 2010 Porsche 911
- 2011 Porsche 911
- 2012 Porsche 911
- 2013 Porsche 911
- 1996 Porsche Boxster
- 1997 Porsche Boxster
- 1998 Porsche Boxster
- 1999 Porsche Boxster
- 2000 Porsche Boxster
- 2001 Porsche Boxster
- 2002 Porsche Boxster
- 2003 Porsche Boxster
- 2004 Porsche Boxster
FAQs
Can Fuel Injector Clinic is902-2150h injectors be used with E85, Q16, or VP Import?
The is902-2150h can be used in E85 applications when Fuel Injector Clinic's applicable care instructions are followed. However, these injectors must not be used with Q16, VP Import, or other MTBE oxygenated fuels because MTBE can swell an internal seal and significantly reduce injector flow.
Do Fuel Injector Clinic is902-2150h injectors require a wiring change?
Yes. The is902-2150h includes PGTDEN6 solder-in pigtails for replacing the existing injector plugs on the wiring harness. Optional PADPDtoJ6S plug-and-play adapters are available for installation without cutting or soldering the factory harness.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing is your source for Fuel Injector Clinic injectors and performance fuel system components for high-horsepower Porsche builds. Injector sizing, fuel compatibility, wiring, and supporting fuel system capacity are especially important when stepping up to an injector with this level of flow. If you have questions about the Fuel Injector Clinic is902-2150h, PGTDEN6 pigtails, PADPDtoJ6S adapters, fuel compatibility, or whether these injectors are right for your specific Porsche combination, our performance specialists are ready to help. Email sales@beefcakeracing.com or call 1-855-827-7223 for assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
