Fuel Injector Clinic 775cc Fuel Injector Set - High Z (is902-0775h) - 1989-2013 Porsche 911 / 1996-2004 Boxster
Upgrade the fuel system in your Porsche with the Fuel Injector Clinic 775cc High-Z Fuel Injector Set. The is902-0775h includes six 775cc saturated, high impedance ball and seat injectors engineered to provide increased fuel delivery while maintaining the excellent linearity and short pulse width repeatability needed for precise tuning and strong drivability. For modified 1989-2013 Porsche 911 and 1996-2004 Boxster applications that need additional fueling capacity, this matched six-injector set combines performance capability with the control required for a properly calibrated street or performance build.
Fuel Injector Clinic precisely matches each is902-0775h set using proprietary Data Match Technology. Every injector is individually serial numbered, with detailed flow matching and latency information supplied on the included Data Match Sheet. The injectors are flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid. PGTUSC6 solder-in pigtails and the O-rings required for the listed factory application are included, while optional PADPUtoJ6S plug-and-play adapters provide an installation solution without cutting or soldering the factory harness. Every injector is covered against failure caused by defects in original manufacture by Fuel Injector Clinic's lifetime warranty.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is902-0775h
- Applications: 1989-2013 Porsche 911 / 1996-2004 Porsche Boxster
- Injector Flow Rate: 775cc/min
- Injector Quantity: 6
- Injector Type: Saturated ball and seat
- Impedance: High-Z / high impedance
- Matching Technology: Fuel Injector Clinic Data Match Technology
- Flow Test Pressure: 43.5 PSI (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Wiring Pigtails: PGTUSC6 solder-in pigtails
- Optional Plug-and-Play Adapters: PADPUtoJ6S
- O-Rings: Included for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Six 775cc High-Z performance fuel injectors
- Designed for the listed Porsche 911 and Boxster applications
- Saturated, high impedance ball and seat injector construction
- Increased fuel delivery for modified and performance-oriented Porsche builds
- Excellent injector linearity for predictable fuel delivery
- Strong short pulse width repeatability for precise low-pulse-width fueling
- Superior short pulse width control supports excellent tunability and drivability
- Fuel Injector Clinic Data Match Technology provides precise injector matching
- Each injector is individually serial numbered
- Included Data Match Sheet provides detailed flow matching and latency information
- Flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid
- Includes PGTUSC6 solder-in wiring pigtails
- Optional PADPUtoJ6S plug-and-play adapters eliminate the need to cut or solder the factory harness
- Includes the O-rings required for the listed factory application
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
Data Match Technology
Consistent fuel delivery across all six cylinders is critical to accurate engine calibration, which is why Fuel Injector Clinic precisely matches the is902-0775h set using proprietary Data Match Technology. Each injector is individually serial numbered, and the included Data Match Sheet provides detailed flow matching and latency information. Combined with excellent linearity and short pulse width repeatability, this detailed injector characterization gives tuners the information needed to accurately control fuel delivery throughout the engine's operating range.
Wiring and Installation
The Fuel Injector Clinic is902-0775h requires an injector plug conversion when installed with the factory wiring harness. PGTUSC6 solder-in pigtails are included and can be installed in place of the existing injector plugs. For an installation that does not require cutting or soldering the factory harness, optional PADPUtoJ6S plug-and-play adapters are available.
Fuel Injector Clinic uses brand-new, unused injectors for its performance applications rather than remanufactured or core-program injectors. The is902-0775h includes the O-rings required for the listed factory application. If your Porsche uses an aftermarket fuel rail or another unusual fuel system configuration, contact Beefcake Racing before ordering to verify proper injector fitment.
Fitment
- 1989 Porsche 911
- 1990 Porsche 911
- 1991 Porsche 911
- 1992 Porsche 911
- 1993 Porsche 911
- 1994 Porsche 911
- 1995 Porsche 911
- 1996 Porsche 911
- 1997 Porsche 911
- 1998 Porsche 911
- 1999 Porsche 911
- 2000 Porsche 911
- 2001 Porsche 911
- 2002 Porsche 911
- 2003 Porsche 911
- 2004 Porsche 911
- 2005 Porsche 911
- 2006 Porsche 911
- 2007 Porsche 911
- 2008 Porsche 911
- 2009 Porsche 911
- 2010 Porsche 911
- 2011 Porsche 911
- 2012 Porsche 911
- 2013 Porsche 911
- 1996 Porsche Boxster
- 1997 Porsche Boxster
- 1998 Porsche Boxster
- 1999 Porsche Boxster
- 2000 Porsche Boxster
- 2001 Porsche Boxster
- 2002 Porsche Boxster
- 2003 Porsche Boxster
- 2004 Porsche Boxster
FAQs
How are Fuel Injector Clinic is902-0775h injectors matched and tested?
Fuel Injector Clinic precisely matches the is902-0775h set using proprietary Data Match Technology. Each injector is individually serial numbered, with detailed flow matching and latency information supplied on the included Data Match Sheet. The injectors are flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid.
Do Fuel Injector Clinic is902-0775h injectors require a wiring change?
Yes. The is902-0775h includes PGTUSC6 solder-in pigtails for replacing the existing injector plugs on the wiring harness. Optional PADPUtoJ6S plug-and-play adapters are available if you want to install the injectors without cutting or soldering the factory harness.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing is your source for Fuel Injector Clinic injectors and performance fuel system components for Porsche street, track, and high-performance builds. Choosing the correct injector size, wiring solution, and supporting fuel system components is critical to building a properly matched combination. If you have questions about the Fuel Injector Clinic is902-0775h, PGTUSC6 pigtails, PADPUtoJ6S adapters, or compatibility with your specific Porsche setup, our performance specialists are ready to help. Email sales@beefcakeracing.com or call 1-855-827-7223 for assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
