Fuel Injector Clinic 650cc Fuel Injector Set - High Z (is902-0650h) - 1989-2013 Porsche 911 / 1996-2004 Boxster
Give your modified Porsche the additional fuel capacity it needs without sacrificing the precise low-speed control that makes a performance car enjoyable on the street. The Fuel Injector Clinic is902-0650h includes six 650cc saturated, high impedance ball and seat injectors engineered for excellent linearity, short pulse width repeatability, and consistent fuel delivery. Designed for the listed 1989-2013 Porsche 911 and 1996-2004 Porsche Boxster applications, this matched injector set is an excellent fueling upgrade for performance builds that have moved beyond the capabilities of the original injectors.
Fuel Injector Clinic precisely matches every is902-0650h set using proprietary Data Match Technology. Each injector is individually serial numbered, and the included Data Match Sheet provides detailed flow matching and latency information to support accurate ECU calibration. The injectors are flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid. PGTUSC6 solder-in pigtails and the O-rings required for the listed factory application are included, while optional PADPUtoJ6S plug-and-play adapters provide an installation option that eliminates cutting or soldering the factory harness.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is902-0650h
- Applications: 1989-2013 Porsche 911 / 1996-2004 Porsche Boxster
- Injector Flow Rate: 650cc/min
- Injector Quantity: 6
- Injector Type: Saturated ball and seat
- Impedance: High-Z / high impedance
- Matching Technology: Fuel Injector Clinic Data Match Technology
- Flow Test Pressure: 43.5 PSI (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Wiring Pigtails: PGTUSC6 solder-in pigtails
- Optional Plug-and-Play Adapters: PADPUtoJ6S
- O-Rings: Included for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Six 650cc High-Z performance fuel injectors
- Designed for the listed Porsche 911 and Boxster applications
- Saturated, high impedance ball and seat injector construction
- Excellent linearity for predictable and consistent fuel delivery
- Strong short pulse width repeatability for precise low-pulse-width fueling
- Superior short pulse width control supports excellent tunability and drivability
- Precisely matched using Fuel Injector Clinic Data Match Technology
- Each injector is individually serial numbered
- Included Data Match Sheet provides detailed flow matching and latency information
- Flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid
- Includes PGTUSC6 solder-in wiring pigtails
- Optional PADPUtoJ6S plug-and-play adapters eliminate the need to cut or solder the factory harness
- Includes the O-rings required for the listed factory application
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
Data Match Technology
Balanced fuel delivery across all six cylinders is critical when tuning a modified Porsche. Fuel Injector Clinic uses proprietary Data Match Technology to precisely match the injectors within each is902-0650h set. Every injector is individually serial numbered, and its results are supplied on the included Data Match Sheet with detailed flow matching and latency information. Combined with excellent linearity and short pulse width repeatability, this level of injector characterization gives tuners the data needed to accurately calibrate fuel delivery throughout the engine's operating range.
Wiring and Installation
The Fuel Injector Clinic is902-0650h requires an injector plug conversion when used with the factory wiring harness. PGTUSC6 solder-in pigtails are included and can be installed in place of the existing injector plugs. For an installation without cutting or soldering the factory harness, optional PADPUtoJ6S plug-and-play adapters are available.
Fuel Injector Clinic chooses brand-new, unused injectors for its performance applications rather than relying on remanufactured or core-program injectors. The is902-0650h is supplied with the O-rings required for the listed factory application. If your Porsche uses an aftermarket fuel rail or another unusual fuel system configuration, contact Beefcake Racing before ordering to make sure you receive injectors configured for proper fitment.
Fitment
- 1989 Porsche 911
- 1990 Porsche 911
- 1991 Porsche 911
- 1992 Porsche 911
- 1993 Porsche 911
- 1994 Porsche 911
- 1995 Porsche 911
- 1996 Porsche 911
- 1997 Porsche 911
- 1998 Porsche 911
- 1999 Porsche 911
- 2000 Porsche 911
- 2001 Porsche 911
- 2002 Porsche 911
- 2003 Porsche 911
- 2004 Porsche 911
- 2005 Porsche 911
- 2006 Porsche 911
- 2007 Porsche 911
- 2008 Porsche 911
- 2009 Porsche 911
- 2010 Porsche 911
- 2011 Porsche 911
- 2012 Porsche 911
- 2013 Porsche 911
- 1996 Porsche Boxster
- 1997 Porsche Boxster
- 1998 Porsche Boxster
- 1999 Porsche Boxster
- 2000 Porsche Boxster
- 2001 Porsche Boxster
- 2002 Porsche Boxster
- 2003 Porsche Boxster
- 2004 Porsche Boxster
FAQs
How are Fuel Injector Clinic is902-0650h injectors matched and tested?
Fuel Injector Clinic precisely matches each set using proprietary Data Match Technology. Every injector is individually serial numbered, with detailed flow matching and latency information supplied on the included Data Match Sheet. The injectors are flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid.
Do Fuel Injector Clinic is902-0650h injectors require a wiring change?
Yes. PGTUSC6 solder-in pigtails are included for replacing the existing injector plugs on the wiring harness. Optional PADPUtoJ6S plug-and-play adapters can be purchased if you prefer an installation that does not require cutting or soldering the factory harness.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing is your source for Fuel Injector Clinic injectors and performance fuel system components for Porsche street, track, and high-performance builds. Selecting the right injector size and installation components is critical to creating a properly matched fuel system. If you have questions about the Fuel Injector Clinic is902-0650h, PGTUSC6 pigtails, PADPUtoJ6S adapters, or compatibility with your specific Porsche setup, our performance specialists are ready to help. Email sales@beefcakeracing.com or call 1-855-827-7223 for assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
