Fuel Injector Clinic 1200cc Fuel Injector Set - High Z (is901-1200h) - 1997-2006 Porsche 996 Turbo
Upgrade the fuel system in your Porsche 996 Turbo with the Fuel Injector Clinic is901-1200h 1200cc High-Z injector set, engineered to deliver the additional fuel capacity demanded by modified and higher-horsepower combinations while retaining precise control and strong drivability. This complete six-injector set uses saturated, high impedance ball and seat injectors with excellent short pulse width control and Fuel Injector Clinic's proprietary Data Match Technology. Best of all, these injectors are a plug-and-play fit with the OEM wiring harness, eliminating the need for an injector plug conversion.
Previously sold as IS901-1100H, the current is901-1200h set is rated at 1200cc/min and individually matched to provide consistent performance across all six cylinders. Each injector is serial numbered, and the included Data Match Sheet supplies detailed flow matching and latency information for accurate calibration. Fuel Injector Clinic flow tests and rates these injectors at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid. The injectors are supplied with the O-rings required for the listed factory application and are backed by Fuel Injector Clinic's lifetime warranty against failure caused by defects in original manufacture.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is901-1200h
- Previous Part Number: IS901-1100H
- Application: Porsche 996 Turbo
- Injector Flow Rate: 1200cc/min
- Injector Quantity: 6
- Injector Type: Saturated ball and seat
- Impedance: High-Z / high impedance
- Matching Technology: Fuel Injector Clinic Data Match Technology
- Flow Test Pressure: 43.5 PSI (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Wiring Connection: Plug-and-play fit to OEM harness
- Plug Conversion Required: No
- O-Rings: Included for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete set of six 1200cc/min performance fuel injectors
- High impedance saturated ball and seat injector design
- Plug-and-play connection to the factory Porsche 996 Turbo wiring harness
- No injector plug conversion, soldering, or wiring adapters required with the OEM harness
- Fuel Injector Clinic Data Match Technology provides precise injector matching
- Each injector is individually serial numbered
- Includes a detailed Data Match Sheet with flow matching and latency information
- Superior short pulse width control supports precise tuning and excellent drivability
- Flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F
- Tested using CF-16B calibration fluid
- Includes O-rings required for the listed factory application
- Previously offered under part number IS901-1100H
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
Data Match Technology for Precise Fuel Delivery
A high-flow injector is only as useful as the control and consistency it provides. Fuel Injector Clinic precisely matches the is901-1200h set using proprietary Data Match Technology, helping provide consistent injector behavior across all six cylinders. Every injector is individually serial numbered, and the included Data Match Sheet supplies detailed flow matching and latency information that gives tuners the data needed for accurate fuel calibration.
High-Flow Performance Without Sacrificing Drivability
The is901-1200h combines 1200cc/min fuel capacity with superior short pulse width control, making it well suited to performance-oriented Porsche 996 Turbo builds where both increased fueling capability and predictable low-pulse-width operation matter. Tight matching and precise injector control help make these injectors easier to tune while supporting the drivability expected from a street-driven performance car.
True Plug-and-Play Installation
Unlike injector sets that require cutting the factory harness, soldering new pigtails, or installing connector adapters, the is901-1200h is designed to connect directly to the OEM Porsche 996 Turbo injector harness. The injectors are also configured with the O-rings required for the listed factory application. If your vehicle uses an aftermarket fuel rail or another non-factory fuel system configuration, contact Beefcake Racing before ordering to confirm proper fitment.
Fitment
- 1997 Porsche 996 Turbo
- 1998 Porsche 996 Turbo
- 1999 Porsche 996 Turbo
- 2000 Porsche 996 Turbo
- 2001 Porsche 996 Turbo
- 2002 Porsche 996 Turbo
- 2003 Porsche 996 Turbo
- 2004 Porsche 996 Turbo
- 2005 Porsche 996 Turbo
- 2006 Porsche 996 Turbo
FAQs
Is Fuel Injector Clinic is901-1200h the replacement for IS901-1100H?
Yes. Fuel Injector Clinic identifies is901-1200h as the current 1200cc injector set that was previously sold under part number IS901-1100H. The current set includes six 1200cc saturated, high impedance ball and seat injectors for the Porsche 996 Turbo.
Does the is901-1200h require pigtails or plug-and-play wiring adapters?
No. The is901-1200h is designed as a plug-and-play fit to the OEM Porsche 996 Turbo wiring harness, so no injector plug conversion, solder-in pigtails, or wiring adapters are required when used with the factory harness.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing is your source for Fuel Injector Clinic injectors and supporting performance fuel system components for Porsche street and high-horsepower builds. Matching injector capacity and fuel system components to your combination is critical for reliable performance and proper tuning. If you have questions about the Fuel Injector Clinic is901-1200h, injector sizing, fitment, or the supporting fuel system for your Porsche 996 Turbo, email sales@beefcakeracing.com or call 1-855-827-7223 for assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
