Fuel Injector Clinic 775cc Fuel Injector Set - High Z (is901-0775h) - 1997-2006 Porsche 996 Turbo
Upgrade the fueling capability of your Porsche 996 Turbo with the Fuel Injector Clinic is901-0775h injector set. This six-injector package features 775cc saturated, high impedance ball and seat injectors engineered for excellent linearity, short pulse width repeatability, and the precise fuel control demanded by modified and higher-performance applications. For enthusiasts looking to add fuel capacity without giving up street-friendly drivability and tuning control, these FIC injectors provide a proven performance-focused solution for the 1997-2006 Porsche 996 Turbo.
Each is901-0775h set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Every injector is individually serial numbered, with detailed flow matching and latency information supplied on the included Data Match Sheet. FIC flow tests and rates these injectors at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid. PGTUSC6 solder-in pigtails and the O-rings required for the listed factory application are included, while optional PADPUtoJ6S plug-and-play adapters provide an installation option without cutting or soldering the factory wiring harness.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is901-0775h
- Application: 1997-2006 Porsche 996 Turbo
- Injector Flow Rate: 775cc/min
- Injector Quantity: 6
- Injector Type: Saturated ball and seat
- Impedance: High-Z / high impedance
- Matching Technology: Fuel Injector Clinic Data Match Technology
- Flow Test Pressure: 43.5 PSI (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Wiring Pigtails: PGTUSC6 solder-in pigtails
- Optional Plug-and-Play Adapters: PADPUtoJ6S
- O-Rings: Included for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Six matched 775cc performance fuel injectors
- Saturated, High-Z ball and seat injector design
- Excellent linearity across the injector operating range
- Strong short pulse width repeatability for precise fuel control
- Superior short pulse width control helps support excellent drivability
- Precisely matched using Fuel Injector Clinic Data Match Technology
- Each injector is individually serial numbered
- Included Data Match Sheet provides detailed flow matching and latency information
- Flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F
- Tested using CF-16B calibration fluid
- Includes PGTUSC6 solder-in wiring pigtails
- Optional PADPUtoJ6S plug-and-play adapters eliminate the need to cut or solder the factory harness
- Includes the O-rings required for the listed factory application
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
Data Match Technology
Increasing injector capacity is only part of building a properly calibrated performance fuel system. Consistent operation across all six cylinders is equally important. Fuel Injector Clinic addresses this with proprietary Data Match Technology, precisely matching each is901-0775h set to provide consistent injector performance. Every injector receives an individual serial number, and its results are documented on the included Data Match Sheet with detailed flow matching and latency information. This provides tuners with valuable injector-specific data when calibrating the engine.
Precision Fuel Control and Drivability
The is901-0775h combines increased 775cc/min fueling capacity with the linearity and short pulse width repeatability needed for precise engine management. Superior short pulse width control and careful injector matching help make the set easier to tune while maintaining excellent drivability. That balance makes these injectors a strong choice for Porsche 996 Turbo owners who need additional fueling capacity while retaining predictable operation at idle and during normal street driving.
Wiring and Installation
The is901-0775h requires an injector plug conversion when installed with the factory wiring harness. PGTUSC6 solder-in pigtails are included and can be installed in place of the existing injector plugs. For owners who prefer an installation without cutting or soldering the factory harness, optional PADPUtoJ6S plug-and-play adapters are available.
Fuel Injector Clinic uses brand-new, unused injectors for its performance applications rather than relying on remanufactured or core-program injectors. The set includes the O-rings required for the listed factory application. If your Porsche uses an aftermarket fuel rail or another unusual fuel system configuration, contact Beefcake Racing before ordering to verify proper injector fitment.
Fitment
- 1997 Porsche 996 Turbo
- 1998 Porsche 996 Turbo
- 1999 Porsche 996 Turbo
- 2000 Porsche 996 Turbo
- 2001 Porsche 996 Turbo
- 2002 Porsche 996 Turbo
- 2003 Porsche 996 Turbo
- 2004 Porsche 996 Turbo
- 2005 Porsche 996 Turbo
- 2006 Porsche 996 Turbo
FAQs
What comes with the Fuel Injector Clinic is901-0775h injector set?
The is901-0775h includes six 775cc saturated, high impedance ball and seat injectors, PGTUSC6 solder-in pigtails, the O-rings required for the listed factory application, and a Data Match Sheet containing detailed flow matching and latency information for the individually serial-numbered injectors.
Do the is901-0775h injectors require changes to the factory wiring harness?
Yes. The included PGTUSC6 pigtails can be soldered into the wiring harness to replace the existing injector plugs. Optional PADPUtoJ6S plug-and-play adapters are also available and allow the injectors to connect without cutting or soldering the factory harness.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing is your source for Fuel Injector Clinic injectors and performance fuel system components for Porsche street and high-performance builds. Selecting the right injector size and wiring solution is an important part of putting together a properly matched fuel system. If you have questions about the Fuel Injector Clinic is901-0775h, PGTUSC6 pigtails, PADPUtoJ6S adapters, or injector sizing for your Porsche 996 Turbo, email sales@beefcakeracing.com or call 1-855-827-7223 for assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
