Fuel Injector Clinic 1000cc Fuel Injector Set - High Z (is850-1000h) - Mini R52 / R53
Give your Mini R52 or R53 the fuel delivery capacity needed for serious performance with the Fuel Injector Clinic 1000cc High-Z Fuel Injector Set. Part number is850-1000h includes four custom saturated, high-impedance ball and seat injectors engineered to combine substantial fuel flow with excellent linearity and short pulse width repeatability. For modified and high-output Mini builds that have moved well beyond the capacity of the factory injectors, this 1000cc set delivers the precise control and consistency needed for accurate tuning and strong drivability.
Fuel Injector Clinic precisely matches each four-injector set using its proprietary Data Match Technology. Every injector is individually serial numbered, with detailed flow matching and latency information supplied on the included Data Match Sheet. The injectors are flow tested and rated at 43.5 PSI, or 3 Bar, with fuel temperature at 90 degrees F using CF-16B calibration fluid. Superior short pulse width control and precise matching help make these high-flow injectors easier to tune while maintaining predictable low-load operation. PGTUSC4 solder-in pigtails are included, or optional PADPUtoJ4 plug-and-play adapters can be selected for installation without cutting or soldering the vehicle wiring harness.
Specifications
- Part Number: is850-1000h
- Injector Flow Rate: 1000cc/min
- Quantity: Set of 4 injectors
- Application: Mini R52 / R53
- Injector Type: Saturated / High Impedance
- Injector Design: Ball and seat
- Matching Technology: Fuel Injector Clinic Data Match Technology
- Injector Identification: Individually serial numbered
- Injector Data: Data Match Sheet with flow matching and latency information
- Test Pressure: 43.5 PSI / 3 Bar
- Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Pigtails: PGTUSC4
- Optional Plug-and-Play Adapters: PADPUtoJ4
- Wiring Requirement: Injector plug conversion required when using the included pigtails
- Seals: Includes O-rings required for the listed factory application
- Injector Condition: Brand-new, unused injectors
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Four 1000cc/min High-Z fuel injectors for Mini R52 and R53 applications
- High-flow capability for modified and high-output Mini builds
- Saturated, high-impedance ball and seat injector design
- Excellent linearity for consistent and predictable fuel delivery
- Superior short pulse width control and repeatability for precise low-load fueling
- Proprietary Data Match Technology precisely matches the injectors within the set
- Each injector is individually serial numbered for identification and matching data
- Detailed Data Match Sheet supplies flow matching and latency information for accurate ECU calibration
- Flow tested and rated at 43.5 PSI / 3 Bar and 90 degrees F using CF-16B calibration fluid
- Includes PGTUSC4 solder-in pigtails for injector plug conversion
- Optional PADPUtoJ4 plug-and-play adapters eliminate the need to cut or solder the vehicle wiring harness
- Includes O-rings required for the listed factory application
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Backed by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
1000cc Fueling Capacity with Precise Low-Load Control
A 1000cc injector provides serious fuel capacity, but outright flow is only useful when the ECU can accurately control it. Fuel Injector Clinic combines the flow capability of these 1000cc High-Z injectors with excellent linearity and superior short pulse width control. This helps provide predictable fueling across a broad operating range, allowing a properly calibrated performance Mini to take advantage of increased fuel capacity without unnecessarily sacrificing idle quality, throttle response, or street drivability.
FIC's Data Match Technology adds another level of precision by matching the four injectors and supplying detailed flow and latency information for tuning. Part number is850-1000h requires an injector plug conversion when using the included PGTUSC4 pigtails. For owners who prefer not to modify the factory wiring harness, optional PADPUtoJ4 plug-and-play adapters provide an installation solution without cutting or soldering. If your Mini uses an aftermarket fuel rail or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to confirm proper fitment.
Fitment
- Mini R52 applications
- Mini R53 applications
FAQs
Does the Fuel Injector Clinic is850-1000h injector set require wiring modifications?
Yes, when using the included PGTUSC4 pigtails, the existing injector plugs on the vehicle wiring harness must be replaced. Optional PADPUtoJ4 plug-and-play adapters can be selected instead, allowing the injectors to connect to the stock harness without cutting or soldering.
How are the FIC is850-1000h 1000cc injectors matched and tested?
Fuel Injector Clinic precisely matches the four injectors using its proprietary Data Match Technology. Each injector is individually serial numbered, and flow matching and latency results are supplied on the included Data Match Sheet. The injectors are flow tested and rated at 43.5 PSI, or 3 Bar, with fuel temperature at 90 degrees F using CF-16B calibration fluid.
Order Your Fuel Injector Clinic Injectors from Beefcake Racing
Beefcake Racing is your source for Fuel Injector Clinic injectors and supporting performance fuel-system components for Mini R52 and R53 builds. Whether you are upgrading a street-driven Mini or putting together a serious high-output combination, proper injector sizing and calibration are critical to achieving the fuel delivery, performance, and drivability your setup demands.
Have questions about injector sizing, wiring, or fitment? Contact Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
