Fuel Injector Clinic 1200cc (Previously 1100cc) Fuel Injector Set - High Z (is828-1200h) - Mercedes 6.3L V8
Upgrade your Mercedes 6.3L V8 fuel system with the Fuel Injector Clinic 1200cc High-Z Fuel Injector Set. Previously rated and sold as the 1100cc version, part number is828-1200h includes eight saturated, high-impedance ball and seat injectors engineered for serious performance applications. The combination of increased fuel capacity, superior short pulse width control, and precise injector matching gives tuners the consistency needed to support higher-output builds while maintaining excellent drivability when properly calibrated.
Fuel Injector Clinic precisely matches each eight-injector set using its proprietary Data Match Technology. Every injector is individually serial numbered, with detailed flow matching and latency information supplied on the included Data Match Sheet. The injectors are flow tested and rated at 43.5 PSI, or 3 Bar, with fuel temperature at 90 degrees F using CF-16B calibration fluid. This application includes PGTJETR8Q pigtails, and the injectors are supplied with the O-rings required for the listed factory application.
Specifications
- Part Number: is828-1200h
- Injector Flow Rate: 1200cc/min
- Previous Flow Rating: 1100cc
- Quantity: Set of 8 injectors
- Engine Application: Mercedes 6.3L V8
- Injector Type: Saturated / High Impedance
- Injector Design: Ball and seat
- Matching Technology: Fuel Injector Clinic Data Match Technology
- Injector Identification: Individually serial numbered
- Injector Data: Data Match Sheet with flow matching and latency information
- Test Pressure: 43.5 PSI / 3 Bar
- Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Pigtails: PGTJETR8Q
- Seals: Includes O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Eight 1200cc/min High-Z fuel injectors for Mercedes 6.3L V8 applications
- Previously rated and offered as FIC's 1100cc injector
- High-flow capability for performance-oriented Mercedes V8 builds
- Saturated, high-impedance ball and seat injector design
- Superior short pulse width control for precise fuel delivery at low injector pulse widths
- Excellent drivability when properly calibrated
- Proprietary Data Match Technology precisely matches the injectors within the set
- Each injector is individually serial numbered for identification and data tracking
- Detailed Data Match Sheet provides flow matching and latency information for ECU calibration
- Flow tested and rated at 43.5 PSI / 3 Bar and 90 degrees F using CF-16B calibration fluid
- Includes PGTJETR8Q pigtails
- Includes O-rings required for the listed factory application
- Backed by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
High-Flow Fueling with Precise Injector Control
Adding injector capacity is only useful when the ECU can accurately control that additional fuel. Fuel Injector Clinic's 1200cc High-Z injectors combine substantial flow capability with superior short pulse width control and precise matching, helping provide predictable fueling throughout the operating range. That balance makes the is828-1200h a strong choice for performance Mercedes 6.3L V8 combinations that need significantly more fuel delivery without sacrificing the control required for street-friendly operation.
FIC's Data Match Technology further improves consistency across the eight-injector set. Each injector is individually identified and accompanied by detailed flow matching and latency information, giving the tuner valuable data for proper calibration. If your Mercedes uses an aftermarket fuel rail or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to confirm proper injector fitment.
Fitment
- Mercedes 6.3L V8 applications
FAQs
Is the Fuel Injector Clinic is828-1200h the injector previously sold as a 1100cc injector?
Yes. Fuel Injector Clinic currently identifies the is828-1200h as its 1200cc injector set and notes that it was previously rated and sold as the 1100cc version. The set includes eight High-Z injectors configured for Mercedes 6.3L V8 applications.
How are the FIC is828-1200h injectors matched and tested?
Fuel Injector Clinic uses its proprietary Data Match Technology to precisely match the eight injectors. Each injector is individually serial numbered, with flow matching and latency results supplied on a Data Match Sheet. The injectors are flow tested and rated at 43.5 PSI, or 3 Bar, with fuel temperature at 90 degrees F using CF-16B calibration fluid.
Order Your Fuel Injector Clinic Injectors from Beefcake Racing
Beefcake Racing is your source for Fuel Injector Clinic injectors and supporting performance fuel-system components for Mercedes V8 builds. Proper injector sizing and calibration are critical when increasing fuel-system capability, and our experienced team can help you select the right injectors and supporting components for your combination and performance goals.
Have questions about injector sizing, installation, or fitment? Contact Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
