Fuel Injector Clinic 1000cc Fuel Injector Set - High Z (is828-1000h) - Mercedes 6.3L V8
Step up the fuel delivery capability of your Mercedes 6.3L V8 with the Fuel Injector Clinic 1000cc High-Z Fuel Injector Set. Part number is828-1000h includes eight saturated, high-impedance ball and seat injectors engineered for high-performance applications that demand increased fuel flow without giving up precise control. Excellent short pulse width performance and FIC's advanced injector matching help deliver the consistent fueling, tunability, and drivability needed for serious naturally aspirated and forced-induction Mercedes V8 builds.
Fuel Injector Clinic precisely matches each eight-injector set using its proprietary Data Match Technology. Every injector is individually serial numbered, with detailed flow matching and latency information supplied on the included Data Match Sheet. The injectors are flow tested and rated at 43.5 PSI, or 3 Bar, with fuel temperature at 90 degrees F using CF-16B calibration fluid. PGTUSC8 solder-in pigtails are included for the required injector plug conversion, and FIC uses brand-new, unused injectors rather than remanufactured or core-program injectors.
Specifications
- Part Number: is828-1000h
- Injector Flow Rate: 1000cc/min
- Quantity: Set of 8 injectors
- Engine Application: Mercedes 6.3L V8
- Injector Type: Saturated / High Impedance
- Injector Design: Ball and seat
- Matching Technology: Fuel Injector Clinic Data Match Technology
- Injector Identification: Individually serial numbered
- Injector Data: Data Match Sheet with flow matching and latency information
- Test Pressure: 43.5 PSI / 3 Bar
- Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Pigtails: PGTUSC8
- Wiring Requirement: Injector plug conversion required
- Seals: Includes O-rings required for the listed factory application
- Injector Condition: Brand-new, unused injectors
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Eight 1000cc/min High-Z fuel injectors for Mercedes 6.3L V8 applications
- High-flow design provides increased fueling capacity for performance engine combinations
- Saturated, high-impedance ball and seat injector construction
- Superior short pulse width control helps maintain precise fueling at low injector pulse widths
- Proprietary Data Match Technology precisely matches the injectors within the set
- Each injector is individually serial numbered for identification and data tracking
- Detailed Data Match Sheet provides flow matching and latency information for accurate calibration
- Flow tested and rated at 43.5 PSI / 3 Bar and 90 degrees F using CF-16B calibration fluid
- Includes PGTUSC8 solder-in pigtails for the required injector plug conversion
- Includes the O-rings required for the listed factory application
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Designed for straightforward tuning and excellent drivability when properly calibrated
- Backed by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
1000cc Fueling Performance with Data Matched Precision
Increasing injector size is only part of building a capable performance fuel system. The injectors also need to respond consistently across the operating range so the ECU and tuner can accurately control fuel delivery. Fuel Injector Clinic combines the substantial flow capability of these 1000cc injectors with superior short pulse width control and precise matching, helping provide predictable performance from idle and part throttle through high-load operation.
FIC's Data Match Technology provides detailed information for the individual injectors rather than relying only on a nominal flow rating. Part number is828-1000h requires an injector plug conversion, and PGTUSC8 solder-in pigtails are included so the existing injector connectors on the vehicle harness can be replaced. An optional plug-and-play adapter solution may also be used to avoid cutting and soldering the factory harness. If your Mercedes uses an aftermarket fuel rail or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to verify proper fitment.
Fitment
- Mercedes 6.3L V8 applications
FAQs
Does the Fuel Injector Clinic is828-1000h injector set require wiring modifications?
Yes. Part number is828-1000h requires an injector plug conversion. Fuel Injector Clinic includes PGTUSC8 solder-in pigtails with the set for replacing the existing injector connectors. A plug-and-play adapter solution may also be used to avoid cutting and soldering the vehicle harness.
How are the FIC is828-1000h 1000cc injectors matched and tested?
Fuel Injector Clinic precisely matches the eight injectors using its proprietary Data Match Technology. Each injector is individually serial numbered, with flow matching and latency results supplied on a Data Match Sheet. The injectors are flow tested and rated at 43.5 PSI, or 3 Bar, with fuel temperature at 90 degrees F using CF-16B calibration fluid.
Order Your Fuel Injector Clinic Injectors from Beefcake Racing
Beefcake Racing is your source for Fuel Injector Clinic injectors and performance fuel-system components for serious Mercedes V8 builds. Proper injector sizing, installation, and calibration are critical to getting the most from your combination, and our experienced team can help you select the right injectors and supporting fuel-system components for your performance goals.
Have questions about injector sizing, wiring, or fitment? Contact Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
