Fuel Injector Clinic 775cc Fuel Injector Set - High Z (is828-0775h) - Mercedes 6.3L V8
Upgrade your Mercedes 6.3L V8 fuel system with the Fuel Injector Clinic 775cc High-Z Fuel Injector Set. Part number is828-0775h includes eight saturated, high-impedance ball and seat injectors engineered for performance applications that demand increased fuel delivery with precise control. Excellent linearity and short pulse width repeatability help provide predictable fueling across the operating range, giving tuners the consistency needed to maintain strong drivability while supporting increased performance.
Fuel Injector Clinic precisely matches every eight-injector set using its proprietary Data Match Technology. Each injector is individually serial numbered, and detailed flow matching and latency information is supplied on the included Data Match Sheet. The injectors are flow tested and rated at 43.5 PSI, or 3 Bar, with fuel temperature at 90 degrees F using CF-16B calibration fluid. PGTUSC8 solder-in pigtails are included for the required injector plug conversion, and FIC uses brand-new, unused injectors rather than remanufactured or core-program injectors.
Specifications
- Part Number: is828-0775h
- Injector Flow Rate: 775cc/min
- Quantity: Set of 8 injectors
- Engine Application: Mercedes 6.3L V8
- Injector Type: Saturated / High Impedance
- Injector Design: Ball and seat
- Matching Technology: Fuel Injector Clinic Data Match Technology
- Injector Identification: Individually serial numbered
- Injector Data: Data Match Sheet with flow matching and latency information
- Test Pressure: 43.5 PSI / 3 Bar
- Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Pigtails: PGTUSC8
- Wiring Requirement: Injector plug conversion required
- Seals: Includes O-rings required for the listed factory application
- Injector Condition: Brand-new, unused injectors
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Eight 775cc/min High-Z fuel injectors for Mercedes 6.3L V8 applications
- Increased fuel-flow capability for performance-oriented Mercedes V8 builds
- Saturated, high-impedance ball and seat injector design
- Excellent linearity for consistent and predictable fuel delivery
- Superior short pulse width control and repeatability for easier tuning and strong drivability
- Proprietary Data Match Technology precisely matches the injectors within the set
- Each injector is individually serial numbered for identification and matching data
- Detailed Data Match Sheet provides flow matching and latency information for accurate calibration
- Flow tested and rated at 43.5 PSI / 3 Bar and 90 degrees F using CF-16B calibration fluid
- Includes PGTUSC8 solder-in pigtails for the required injector plug conversion
- Includes the O-rings required for the listed factory application
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Backed by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
Data Matched Performance for Your Mercedes 6.3L V8
High-performance injectors need more than additional flow capacity. They also need consistent response and precise control so the ECU can accurately manage fuel delivery throughout the operating range. Fuel Injector Clinic's 775cc High-Z injectors combine increased flow capability with excellent linearity and superior short pulse width control, helping deliver the predictable response needed for proper calibration, smooth drivability, and dependable performance.
FIC's Data Match Technology provides detailed matching and latency information for the injectors in the set rather than relying solely on a nominal flow rating. Part number is828-0775h requires an injector plug conversion, and PGTUSC8 solder-in pigtails are included so the existing injector connectors on the vehicle harness can be replaced. An optional plug-and-play adapter solution can be used instead to avoid cutting and soldering the factory harness. If your Mercedes uses an aftermarket fuel rail or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to verify proper injector fitment.
Fitment
- Mercedes 6.3L V8 applications
FAQs
Does the Fuel Injector Clinic is828-0775h injector set require wiring modifications?
Yes. Part number is828-0775h requires an injector plug conversion. Fuel Injector Clinic includes PGTUSC8 solder-in pigtails with the set for replacing the existing injector connectors. An optional plug-and-play adapter solution can be used instead if you prefer to avoid cutting and soldering the vehicle harness.
How are the FIC is828-0775h 775cc injectors matched and tested?
Fuel Injector Clinic precisely matches the eight injectors using its proprietary Data Match Technology. Each injector is individually serial numbered, with flow matching and latency results supplied on a Data Match Sheet. The injectors are flow tested and rated at 43.5 PSI, or 3 Bar, with fuel temperature at 90 degrees F using CF-16B calibration fluid.
Order Your Fuel Injector Clinic Injectors from Beefcake Racing
Beefcake Racing is your source for Fuel Injector Clinic injectors and performance fuel-system components for Mercedes V8 builds. Proper injector sizing, installation, and calibration are critical when increasing fuel-system capability, and our experienced team can help you choose the right injectors and supporting components for your combination and performance goals.
Have questions about injector sizing, wiring, or fitment? Contact Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
