Fuel Injector Clinic 2150cc High Impedance Fuel Injector Set (IS810-2150H) - 2006-2010 BMW E60 M5 / 2006-2010 BMW E63 M6 / 2007-2010 BMW E64 M6
When only the highest fuel capacity will do, the Fuel Injector Clinic IS810-2150H Fuel Injector Set delivers. Designed specifically for the BMW S85 V10, this complete set of ten 2150cc saturated (high impedance) injectors is built for extreme horsepower combinations running E85 and other high-volume fuels. As the largest high impedance injectors available from Fuel Injector Clinic, these injectors combine enormous flow capacity with excellent low-speed drivability, smooth idle quality, and exceptional short pulse width control, making them an outstanding choice for serious street, drag racing, and competition builds.
Every injector is individually flow tested, dynamically matched, and serial numbered using Fuel Injector Clinic's proprietary Data Match Technology. Each matched set includes a comprehensive Data Match Sheet containing individual flow and latency values for precise ECU calibration. Flow testing is performed at 43.5 PSI (3 Bar) using CF-16B calibration fluid at 90 degrees Fahrenheit. PGTDEN10 injector pigtails are included for installation, while optional PADPDtoJ10 Plug and Play adapters are available separately for customers who prefer a no-cut installation. All required O-rings are included for the factory application, and every injector is backed by Fuel Injector Clinic's Lifetime Warranty against defects in original manufacture.
Quick Specs
- Manufacturer: Fuel Injector Clinic
- Part Number: IS810-2150H
- Injector Size: 2150cc
- Quantity: Ten injectors
- Injector Type: Saturated / High Impedance
- Vehicle Application: BMW S85 V10
- Included: PGTDEN10 injector pigtails
- Optional Adapter: PADPDtoJ10 Plug and Play adapters
- Flow Rating: Rated at 43.5 PSI (3 Bar)
- Flow Test Fluid: CF-16B calibration fluid
- Flow Test Temperature: 90 degrees Fahrenheit
- Matching Method: Fuel Injector Clinic Data Match Technology
- Recommended Fuel: E85 and other non-MTBE high-volume fuels
- Installation: Includes all required O-rings for the factory application
- Warranty: Lifetime Warranty against defects in original manufacture
Features
- Complete set of ten 2150cc saturated (high impedance) fuel injectors.
- Designed specifically for BMW S85 V10 applications.
- Largest high impedance injectors available from Fuel Injector Clinic.
- Outstanding low-speed throttle response despite extremely high flow capacity.
- Excellent short pulse width control for smooth idle and part-throttle operation.
- Matched using Fuel Injector Clinic's proprietary Data Match Technology.
- Each injector is individually serial numbered.
- Includes Data Match Sheet with individual flow and latency values.
- Flow tested at 43.5 PSI (3 Bar).
- Tested at 90 degrees Fahrenheit using CF-16B calibration fluid.
- Brand-new injectors with no remanufactured or core exchange components.
- Includes PGTDEN10 injector pigtails.
- Optional PADPDtoJ10 Plug and Play adapters available separately.
- Includes all required O-rings for the factory application.
- Backed by Fuel Injector Clinic's Lifetime Warranty.
Important Fuel Compatibility Information
Do not use the IS810-2150H with VP Q16, VP Import, or any other MTBE oxygenated fuel. The internal seal used in this injector can swell when exposed to MTBE oxygenated fuels, significantly reducing injector flow and making the injector unsuitable for those fuel types.
The IS810-2150H is an excellent choice for E85 and other non-MTBE high-volume fuels. When operating with alcohol-based fuels such as E85, Fuel Injector Clinic recommends following proper storage and maintenance procedures to help prevent corrosion during extended periods of inactivity.
Fitment
- 2006 BMW E60 M5
- 2007 BMW E60 M5
- 2008 BMW E60 M5
- 2009 BMW E60 M5
- 2010 BMW E60 M5
- 2006 BMW E63 M6 Coupe
- 2007 BMW E63 M6 Coupe
- 2008 BMW E63 M6 Coupe
- 2009 BMW E63 M6 Coupe
- 2010 BMW E63 M6 Coupe
- 2007 BMW E64 M6 Convertible
- 2008 BMW E64 M6 Convertible
- 2009 BMW E64 M6 Convertible
- 2010 BMW E64 M6 Convertible
FAQs
Do these injectors require wiring modifications?
Yes. The IS810-2150H includes PGTDEN10 injector pigtails that can be soldered into the factory wiring harness. If you prefer not to cut or solder the harness, optional PADPDtoJ10 Plug and Play adapters are available separately.
Can these injectors be used with VP Q16 or VP Import fuel?
No. The IS810-2150H should never be used with VP Q16, VP Import, or any other MTBE oxygenated fuel because the internal injector seal can swell and significantly reduce injector flow, rendering the injectors unsuitable for those fuels.
Why Buy from Beefcake Racing?
Beefcake Racing proudly supplies genuine Fuel Injector Clinic fuel system components backed by expert technical support and exceptional customer service. Whether you're building an all-out E85-powered S85 V10 race car or a high-horsepower forced induction street machine, our experienced team can help you choose the ideal injectors and supporting fuel system components. Contact us at sales@beefcakeracing.com or call 1-855-827-7223 for expert assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
