Fuel Injector Clinic 2150cc High Impedance Fuel Injector Set (IS804-2150H) - 2008-2013 BMW E90 M3 / E92 M3 / E93 M3
When your BMW S65 V8 build demands maximum fuel delivery, the Fuel Injector Clinic IS804-2150H Fuel Injector Set delivers the flow capacity needed for the most extreme horsepower combinations. This complete set of eight 2150cc saturated (high impedance) injectors is engineered for serious race applications while still providing exceptional low-speed throttle response and outstanding short pulse width control. As the largest high impedance injectors available from Fuel Injector Clinic, these injectors are capable of supporting massive horsepower on properly engineered fuel systems without sacrificing tuning precision.
Every injector is individually flow tested, dynamically matched, and serial numbered using Fuel Injector Clinic's proprietary Data Match Technology. Because of their exceptionally large flow capacity, these injectors receive advanced dynamic matching to improve ECU control in the sub-2 millisecond pulse width range, resulting in smoother idle quality and improved part-throttle drivability. Each injector set includes a detailed Data Match Sheet with individual flow and latency values for precise ECU calibration. Flow testing is performed at 43.5 PSI (3 Bar) using CF-16B calibration fluid at 90 degrees Fahrenheit. This injector set includes PGTDEN8 injector pigtails, while optional PADPDtoJ8 Plug and Play adapters are available separately. All required O-rings are included for the factory application, and every injector is backed by Fuel Injector Clinic's Lifetime Warranty against defects in original manufacture.
Quick Specs
- Manufacturer: Fuel Injector Clinic
- Part Number: IS804-2150H
- Injector Size: 2150cc
- Quantity: Eight injectors
- Injector Type: Saturated / High Impedance
- Engine: BMW S65 4.0L V8
- Included: PGTDEN8 injector pigtails
- Optional Adapter: PADPDtoJ8 Plug and Play adapters
- Flow Rating: Rated at 43.5 PSI (3 Bar)
- Flow Test Fluid: CF-16B calibration fluid
- Flow Test Temperature: 90 degrees Fahrenheit
- Matching Method: Fuel Injector Clinic Data Match Technology
- Fuel Compatibility: E85 and other non-MTBE fuels
- Installation: Includes all required O-rings for the factory application
- Warranty: Lifetime Warranty against defects in original manufacture
Features
- Complete set of eight 2150cc saturated (high impedance) fuel injectors.
- Designed specifically for BMW S65 V8 applications.
- Largest high impedance injectors available from Fuel Injector Clinic.
- Excellent low-speed throttle response despite extremely high flow capacity.
- Outstanding short pulse width control and drivability.
- Advanced Data Match Technology improves sub-2 millisecond pulse width control.
- Matched using Fuel Injector Clinic's proprietary Data Match Technology.
- Each injector is individually serial numbered.
- Includes Data Match Sheet with individual flow and latency values.
- Flow tested at 43.5 PSI (3 Bar).
- Tested at 90 degrees Fahrenheit using CF-16B calibration fluid.
- Brand-new injectors with no remanufactured or core exchange components.
- Includes PGTDEN8 injector pigtails.
- Optional PADPDtoJ8 Plug and Play adapters available separately.
- Includes all required O-rings for the factory application.
- Backed by Fuel Injector Clinic's Lifetime Warranty.
Important Fuel Compatibility Information
Do not use the IS804-2150H with VP Q16, VP Import, or any other MTBE oxygenated fuel. The internal seal used in this injector can swell when exposed to MTBE oxygenated fuels, significantly reducing injector flow and making the injector unsuitable for those fuel types.
The IS804-2150H is an excellent choice for E85 and other non-MTBE fuels. When operating with alcohol-based fuels such as E85, Fuel Injector Clinic recommends following proper storage and maintenance procedures to help prevent corrosion during extended periods of inactivity.
Fitment
- 2008 BMW E90 M3 Sedan
- 2009 BMW E90 M3 Sedan
- 2010 BMW E90 M3 Sedan
- 2011 BMW E90 M3 Sedan
- 2008 BMW E92 M3 Coupe
- 2009 BMW E92 M3 Coupe
- 2010 BMW E92 M3 Coupe
- 2011 BMW E92 M3 Coupe
- 2012 BMW E92 M3 Coupe
- 2013 BMW E92 M3 Coupe
- 2008 BMW E93 M3 Convertible
- 2009 BMW E93 M3 Convertible
- 2010 BMW E93 M3 Convertible
- 2011 BMW E93 M3 Convertible
- 2012 BMW E93 M3 Convertible
- 2013 BMW E93 M3 Convertible
FAQs
Do these injectors require wiring modifications?
Yes. The IS804-2150H includes PGTDEN8 injector pigtails for solder-in installation. If you prefer not to cut or solder the factory wiring harness, optional PADPDtoJ8 Plug and Play adapters are available separately for a direct plug-in installation.
Can these injectors be used with VP Q16 or VP Import fuel?
No. The IS804-2150H should never be used with VP Q16, VP Import, or any other MTBE oxygenated fuel because the internal injector seal can swell and significantly reduce injector flow, rendering the injectors unsuitable for those fuels.
Why Buy from Beefcake Racing?
Beefcake Racing proudly supplies genuine Fuel Injector Clinic fuel system components backed by expert technical support and exceptional customer service. Whether you're building a high-horsepower supercharged S65 V8 or a dedicated race car, our knowledgeable team can help you choose the right injectors and supporting fuel system components. Contact us at sales@beefcakeracing.com or call 1-855-827-7223 for expert assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
