Fuel Injector Clinic 2150cc High Impedance Fuel Injector Set (IS801-2150H) - 2000-2006 BMW E46 M3 / 2006-2008 BMW Z4 M
Built for extreme horsepower applications running high fuel demand, the Fuel Injector Clinic IS801-2150H Fuel Injector Set gives your S54-powered BMW the massive fuel capacity needed for serious E85 and other high-volume fuel combinations. This complete set of six 2150cc saturated (high impedance) injectors utilizes the latest injector technology to deliver exceptional low-speed drivability, outstanding short pulse width control, and excellent idle quality despite its enormous flow capacity. Whether you're building a high-boost street car or a dedicated race vehicle, these injectors provide the fueling precision needed to support your combination.
Each injector is individually flow tested, dynamically matched, and serial numbered using Fuel Injector Clinic's proprietary Data Match Technology. Every matched set includes a comprehensive Data Match Sheet with individual flow and injector latency values for highly accurate ECU calibration. The injectors are flow tested at 43.5 PSI (3 Bar) using CF-16B calibration fluid at 90 degrees Fahrenheit and include all required O-rings for the factory application. PGTDEN6 injector pigtails are included, while optional PADPDtoJ6 Plug and Play adapters are available separately for a no-cut installation. Every injector set is backed by Fuel Injector Clinic's Lifetime Warranty against defects in original manufacture.
Quick Specs
- Manufacturer: Fuel Injector Clinic
- Part Number: IS801-2150H
- Injector Size: 2150cc
- Quantity: Six injectors
- Injector Type: Saturated / High Impedance
- Vehicle Application: 2000-2006 BMW E46 M3 / 2006-2008 BMW Z4 M
- Included: PGTDEN6 injector pigtails
- Optional Adapter: PADPDtoJ6 Plug and Play adapters
- Flow Rating: Rated at 43.5 PSI (3 Bar)
- Flow Test Fluid: CF-16B calibration fluid
- Flow Test Temperature: 90 degrees Fahrenheit
- Matching Method: Fuel Injector Clinic Data Match Technology
- Fuel Compatibility: Pump gasoline, E85, and other non-MTBE fuels
- Installation: Includes all required O-rings for the factory application
- Warranty: Lifetime Warranty against defects in original manufacture
Features
- Complete set of six 2150cc saturated (high impedance) fuel injectors.
- Engineered for the 2000-2006 BMW E46 M3 and 2006-2008 BMW Z4 M.
- Excellent injector choice for E85 and other high-volume fuels.
- Outstanding low-speed drivability despite extremely high flow capacity.
- Excellent short pulse width control for stable idle and part-throttle operation.
- Dynamic matching using Fuel Injector Clinic's proprietary Data Match Technology.
- Each injector is individually serial numbered.
- Includes Data Match Sheet with individual flow and latency values.
- Flow tested at 43.5 PSI (3 Bar).
- Tested at 90 degrees Fahrenheit using CF-16B calibration fluid.
- Brand-new injectors with no remanufactured or core exchange components.
- Includes PGTDEN6 injector pigtails.
- Optional PADPDtoJ6 Plug and Play adapters available separately.
- Includes all required O-rings for the factory application.
- Backed by Fuel Injector Clinic's Lifetime Warranty.
Important Fuel Compatibility Information
Do not use the IS801-2150H with VP Import, VP Q16, or any other MTBE oxygenated fuel. The internal seal used in this injector can swell when exposed to MTBE oxygenated fuels, significantly reducing injector flow and making the injector unsuitable for those fuel types.
These injectors are an excellent choice for E85 and other non-MTBE high-volume fuels. When operating with alcohol-based fuels such as E85, Fuel Injector Clinic recommends following proper storage and maintenance procedures to minimize corrosion during extended periods of inactivity.
Fitment
- 2000 BMW E46 M3
- 2001 BMW E46 M3
- 2002 BMW E46 M3
- 2003 BMW E46 M3
- 2004 BMW E46 M3
- 2005 BMW E46 M3
- 2006 BMW E46 M3
- 2006 BMW Z4 M
- 2007 BMW Z4 M
- 2008 BMW Z4 M
FAQs
Do these injectors require wiring modifications?
Yes. The IS801-2150H includes PGTDEN6 injector pigtails that can be soldered into the factory wiring harness. If you prefer not to cut or solder the harness, optional PADPDtoJ6 Plug and Play adapters are available separately.
Can these injectors be used with VP Q16 or VP Import fuel?
No. The IS801-2150H should never be used with VP Q16, VP Import, or any other MTBE oxygenated fuel because the internal injector seal can swell and significantly reduce injector flow.
Why Buy from Beefcake Racing?
Beefcake Racing proudly supplies genuine Fuel Injector Clinic fuel system components backed by expert technical support and outstanding customer service. Whether you're building a high-horsepower street car or an all-out race machine, our experienced team can help you choose the right injectors and supporting fuel system components for your S54-powered BMW. Contact us at sales@beefcakeracing.com or call 1-855-827-7223 for expert assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
