Fuel Injector Clinic 1200cc Injector Set (is461-1200h) - 2011-2017 Ford Mustang V6
Give your 2011-2017 Ford Mustang V6 the fuel capacity needed for a serious performance build with the Fuel Injector Clinic 1200cc high-impedance injector set. This matched set of six injectors flows 1200cc/min, or 110 lbs/hr, at 43.5 PSI fuel pressure, delivering substantial fueling capability while retaining the precise control needed for strong street manners. Excellent linearity and short pulse width repeatability help tuners maintain accurate fuel delivery at idle and part throttle while providing the additional flow required as engine load, boost, and horsepower increase.
Previously offered as is461-1100h, the current is461-1200h set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Every injector is individually serial numbered, with detailed flow matching and latency results supplied on the Data Match Sheet for accurate calibration. The set includes PGTJET6Q solder-in pigtails for the required injector connector conversion, while optional PADPJtoU6 plug-and-play adapters provide an installation option without cutting or soldering the factory wiring harness. Plug-and-play Ford ECU data is also available from Fuel Injector Clinic.
Specifications
- Part Number: is461-1200h
- Previous Part Number: is461-1100h
- Application: 2011-2017 Ford Mustang V6
- Injector Quantity: 6
- Flow Rate: 1200cc/min
- Flow Rate at 43.5 PSI: 110 lbs/hr
- Fuel Pressure Rating: 43.5 PSI / 3 Bar
- Impedance: High impedance / saturated
- Injector Design: Ball and seat
- Included Connector Solution: PGTJET6Q solder-in pigtails
- Optional Connector Solution: PADPJtoU6 plug-and-play adapters
- Injector Matching: Fuel Injector Clinic Data Match Technology
- Calibration Fluid: CF-16B
- Test Fuel Temperature: 90 degrees F
- ECU Data: Plug-and-play Ford ECU data available from Fuel Injector Clinic
- O-Rings: Includes O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Six 1200cc/min high-impedance performance fuel injectors
- 110 lbs/hr flow rating at 43.5 PSI fuel pressure
- Designed for 2011-2017 Ford Mustang V6 applications
- Current replacement for the previous is461-1100h injector set
- Excellent linearity across the injector operating range
- Superior short pulse width control and repeatability
- Precisely matched using Fuel Injector Clinic Data Match Technology
- Each injector is individually serial numbered
- Detailed Data Match Sheet provides flow matching and latency information
- Flow tested and rated at 43.5 PSI / 3 Bar
- Tested at 90 degrees F fuel temperature using CF-16B calibration fluid
- Includes PGTJET6Q solder-in pigtails for injector connector conversion
- Optional PADPJtoU6 plug-and-play adapters eliminate the need to cut or solder the factory wiring harness
- Plug-and-play Ford ECU calibration data available from Fuel Injector Clinic
- Includes the O-rings required for the listed factory application
- Uses brand-new injectors rather than remanufactured or core-program injectors
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
1200cc Fuel Capacity with Precise Control
The FIC 1200cc injector provides the additional fuel capacity demanded by higher-output Mustang V6 combinations without treating low-speed performance as an afterthought. Excellent linearity and superior short pulse width control help tuners accurately manage fueling during idle and part-throttle operation while 1200cc/min of flow provides the capacity needed as fuel demand increases. The result is a high-flow injector designed to balance horsepower capability with the drivability expected from a properly calibrated street car.
Data Match Technology for Accurate Calibration
Fuel Injector Clinic precisely matches each is461-1200h set using proprietary Data Match Technology. Every injector is individually serial numbered, and its results are documented on the supplied Data Match Sheet. Detailed flow matching and latency information gives your tuner accurate injector data for consistent fuel delivery across all six cylinders and helps eliminate the guesswork associated with generic injector values.
Connector Options for Your Mustang V6
The is461-1200h requires an injector connector conversion for the listed Mustang V6 application. Fuel Injector Clinic includes PGTJET6Q solder-in pigtails, allowing the existing injector plugs to be replaced on the vehicle wiring harness. For owners who prefer an installation without cutting or soldering the factory harness, optional PADPJtoU6 plug-and-play adapters convert between the injector and factory harness connectors.
Brand-New Performance Injectors
Fuel Injector Clinic chooses brand-new, unused injectors for its performance applications rather than relying on remanufactured or core-program injectors. Combined with precise matching, detailed injector data, and the included application-specific O-rings, the is461-1200h provides Mustang V6 owners with a purpose-built fueling solution designed around performance, consistency, and accurate tuning.
Fitment
- 2011 Ford Mustang V6
- 2012 Ford Mustang V6
- 2013 Ford Mustang V6
- 2014 Ford Mustang V6
- 2015 Ford Mustang V6
- 2016 Ford Mustang V6
- 2017 Ford Mustang V6
Fitment Note: Fuel Injector Clinic supplies these injectors with the O-rings required for the listed factory application. If your Mustang uses an aftermarket fuel rail or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to verify proper fitment.
FAQs
Is Fuel Injector Clinic is461-1200h the replacement for is461-1100h?
Yes. Fuel Injector Clinic identifies the current is461-1200h 1200cc injector set as the successor to the previous is461-1100h part number for this Mustang V6 application.
Does the FIC is461-1200h require an injector plug conversion?
Yes. The set includes PGTJET6Q solder-in pigtails for converting the injector connections. Optional PADPJtoU6 plug-and-play adapters are available if you prefer to connect the injectors without cutting or soldering the factory wiring harness.
Why Buy from Beefcake Racing?
Beefcake Racing specializes in Ford performance and high-horsepower fuel-system combinations. Whether you are upgrading a forced-induction Mustang V6 or putting together a complete fuel-system build, our experienced team can help you select injectors and supporting components that match your setup and performance goals.
Questions about Fuel Injector Clinic part number is461-1200h or your Mustang V6 fuel system? Email Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
