Fuel Injector Clinic 660cc Injector Set (is461-0660h-sp) - 2011-2017 Ford Mustang V6
Give your 2011-2017 Ford Mustang V6 the fuel delivery needed to support a performance build with the Fuel Injector Clinic 660cc high-impedance injector set. This matched set of six injectors flows 660cc/min, or 63 lbs/hr, at 43.5 PSI fuel pressure, delivering increased fueling capability while maintaining the precise control needed for responsive street performance. Designed as a drop-in solution for both injector size and electrical connection, the is461-0660h-sp installs without the plug conversions or wiring modifications required by many aftermarket injector setups.
Fuel Injector Clinic combines excellent linearity and short pulse width repeatability with its proprietary Data Match Technology to deliver consistent performance across all six injectors. Each injector is individually serial numbered, with detailed matching results supplied on the Data Match Sheet for accurate calibration. The injectors are flow tested and rated at 43.5 PSI / 3 Bar and 90 degrees F fuel temperature using CF-16B calibration fluid, while plug-and-play Ford ECU data is available from Fuel Injector Clinic to further simplify the tuning process.
Specifications
- Part Number: is461-0660h-sp
- Application: 2011-2017 Ford Mustang V6
- Injector Quantity: 6
- Flow Rate: 660cc/min
- Flow Rate at 43.5 PSI: 63 lbs/hr
- Fuel Pressure Rating: 43.5 PSI / 3 Bar
- Impedance: High impedance / saturated
- Injector Design: Ball and seat
- Fitment: Drop-in for injector size and electrical plug
- Injector Matching: Fuel Injector Clinic Data Match Technology
- Calibration Fluid: CF-16B
- Test Fuel Temperature: 90 degrees F
- ECU Data: Plug-and-play Ford ECU data available from Fuel Injector Clinic
- O-Rings: Includes O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Six 660cc/min high-impedance fuel injectors
- 63 lbs/hr flow rating at 43.5 PSI fuel pressure
- Designed specifically for 2011-2017 Ford Mustang V6 applications
- Drop-in physical fitment for straightforward installation
- Drop-in electrical plug with no connector conversion required
- Excellent linearity across the injector operating range
- Superior short pulse width control and repeatability
- Precisely matched using Fuel Injector Clinic Data Match Technology
- Each injector is individually serial numbered
- Detailed Data Match Sheet provides injector matching and latency information
- Flow tested and rated at 43.5 PSI / 3 Bar
- Tested at 90 degrees F fuel temperature using CF-16B calibration fluid
- Plug-and-play Ford ECU calibration data available from Fuel Injector Clinic
- Includes the O-rings required for the listed factory application
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
Data Match Technology for Precise Fuel Delivery
A performance injector set needs to deliver consistent fuel across every cylinder, not simply provide additional flow. Fuel Injector Clinic uses its proprietary Data Match Technology to precisely match the injectors within each is461-0660h-sp set. Every injector is individually serial numbered, and the supplied Data Match Sheet provides detailed flow matching and latency information. This gives your tuner accurate injector data for precise fuel control across all six cylinders.
Performance Fueling with Excellent Drivability
The FIC 660cc injector provides increased fuel capacity while retaining the control needed for a responsive street-driven Mustang. Excellent linearity and superior short pulse width behavior help make these injectors easier to calibrate during idle and part-throttle operation while providing additional fuel delivery as engine load and horsepower increase. The result is an injector designed to balance performance capability with the drivability expected from a properly tuned Mustang V6.
True Drop-In Mustang V6 Fitment
The is461-0660h-sp injector set is designed as a drop-in solution for the listed 2011-2017 Ford Mustang V6 application. Both the injector dimensions and electrical plug are configured for the factory application, eliminating the need for a plug conversion. Fuel Injector Clinic also supplies the O-rings required for factory fitment, making this a straightforward injector upgrade for compatible factory fuel-system configurations.
Fitment
- 2011 Ford Mustang V6
- 2012 Ford Mustang V6
- 2013 Ford Mustang V6
- 2014 Ford Mustang V6
- 2015 Ford Mustang V6
- 2016 Ford Mustang V6
- 2017 Ford Mustang V6
Fitment Note: Fuel Injector Clinic configures these injectors with the O-rings required for the listed factory application. If your Mustang uses an aftermarket fuel rail or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to confirm proper fitment.
FAQs
Are Fuel Injector Clinic is461-0660h-sp injectors a drop-in fit for the 2011-2017 Mustang V6?
Yes. Fuel Injector Clinic specifies the is461-0660h-sp as drop-in for both injector size and electrical plug on the listed Mustang V6 application, so no injector plug conversion is required.
What tuning information is available for the FIC is461-0660h-sp injector set?
Each injector is individually serial numbered, and detailed flow matching and latency information is provided on the Data Match Sheet. Fuel Injector Clinic also makes plug-and-play Ford ECU data available to help tuners accurately calibrate the injector set.
Why Buy from Beefcake Racing?
Beefcake Racing specializes in Ford performance and has the experience to help match your fuel system to your Mustang's power goals. Whether you are upgrading injectors as part of a naturally aspirated build, forced-induction combination, or complete fuel-system upgrade, our team can help you choose the right components for your setup.
Questions about Fuel Injector Clinic part number is461-0660h-sp or your Mustang V6 fuel system? Email Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
