Fuel Injector Clinic 540cc Injector Set (is461-0540h) - 2011-2017 Ford Mustang V6
Upgrade your 2011-2017 Ford Mustang V6 with the Fuel Injector Clinic 540cc high-impedance injector set, a performance-focused solution that delivers increased fuel capacity without giving up the precise control and drivability you want on the street. This matched set of six injectors flows 540cc/min, or 52 lbs/hr, at 43.5 PSI fuel pressure and features excellent linearity and short pulse width repeatability. Better yet, the is461-0540h is designed as a drop-in replacement for both injector size and electrical plug, making it a straightforward upgrade with no plug conversion required.
Fuel Injector Clinic precisely flow matches each high-performance injector set to within 1%. Every injector is individually numbered, and its results are documented on the detailed flow sheet supplied with the set. FIC tests and rates these injectors at 43.5 PSI / 3 Bar and 90 degrees F fuel temperature using CF-16B calibration fluid. Tight manufacturing tolerances and superior short pulse width control help make the injectors easier to tune while maintaining strong drivability, and plug-and-play Ford ECU data is available from Fuel Injector Clinic for calibration support.
Specifications
- Part Number: is461-0540h
- Application: 2011-2017 Ford Mustang V6
- Injector Quantity: 6
- Flow Rate: 540cc/min
- Flow Rate at 43.5 PSI: 52 lbs/hr
- Fuel Pressure Rating: 43.5 PSI / 3 Bar
- Impedance: High impedance / saturated
- Injector Design: Ball and seat
- Fitment: Drop-in for injector size and electrical plug
- Flow Matching: Precisely flow matched to within 1%
- Calibration Fluid: CF-16B
- Test Fuel Temperature: 90 degrees F
- ECU Data: Plug-and-play Ford ECU data available from Fuel Injector Clinic
- O-Rings: Includes O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Six 540cc/min high-impedance performance fuel injectors
- 52 lbs/hr flow rating at 43.5 PSI fuel pressure
- Designed specifically for 2011-2017 Ford Mustang V6 applications
- Drop-in injector dimensions for straightforward installation
- Drop-in electrical plug with no connector conversion required
- Excellent linearity for predictable fuel delivery
- Superior short pulse width control and repeatability
- Precisely flow matched to within 1%
- Each injector is individually numbered
- Detailed flow sheet documents individual injector results
- Flow tested and rated at 43.5 PSI / 3 Bar
- Tested at 90 degrees F fuel temperature using CF-16B calibration fluid
- Tight manufacturing tolerances help simplify accurate tuning
- Plug-and-play Ford ECU calibration data available from Fuel Injector Clinic
- Includes the O-rings required for the listed factory application
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
Precisely Flow Matched to Within 1%
Consistent fuel delivery across all six cylinders is critical to getting the most from a performance Mustang. Fuel Injector Clinic precisely flow matches each is461-0540h injector set to within 1%, helping reduce injector-to-injector variation. Every injector is individually numbered, with its results listed on the detailed flow sheet included with the set. That level of matching gives your tuner reliable injector information and helps deliver consistent fueling throughout the engine.
Performance Fueling with Excellent Drivability
The FIC 540cc injector gives your Mustang V6 additional fuel capacity while maintaining the control required for a properly tuned street car. Excellent linearity, tight manufacturing tolerances, and superior short pulse width behavior help provide predictable fuel delivery during idle and part-throttle operation while supplying increased flow as engine load and fuel demand rise. The result is an injector upgrade built to support performance without turning everyday drivability into an afterthought.
True Drop-In Mustang V6 Installation
The is461-0540h is designed as a drop-in injector set for the listed 2011-2017 Ford Mustang V6 application. Both injector dimensions and the electrical plug are configured for the factory application, so no injector plug conversion is required. Fuel Injector Clinic also supplies the O-rings needed for factory fitment, helping make installation straightforward for vehicles retaining the compatible factory fuel-system configuration.
Fitment
- 2011 Ford Mustang V6
- 2012 Ford Mustang V6
- 2013 Ford Mustang V6
- 2014 Ford Mustang V6
- 2015 Ford Mustang V6
- 2016 Ford Mustang V6
- 2017 Ford Mustang V6
Fitment Note: Fuel Injector Clinic supplies these injectors with the O-rings required for the listed factory application. If your Mustang uses an aftermarket fuel rail or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to verify proper fitment.
FAQs
Are Fuel Injector Clinic is461-0540h injectors a drop-in fit for the 2011-2017 Mustang V6?
Yes. Fuel Injector Clinic specifies the is461-0540h as drop-in for both injector size and electrical plug on the listed Mustang V6 application, so no injector plug conversion is required.
How closely matched are the FIC is461-0540h injectors?
Fuel Injector Clinic precisely flow matches its high-performance injector sets to within 1%. Each injector is individually numbered, and the results for every injector are provided on the detailed flow sheet included with the set.
Why Buy from Beefcake Racing?
Beefcake Racing specializes in Ford performance and can help you choose fuel-system components that match your Mustang's combination and power goals. Whether you are upgrading a street-driven V6 or building a more serious performance setup, our team can help make sure you get the right parts for the job.
Questions about Fuel Injector Clinic part number is461-0540h or your Mustang V6 fuel system? Email Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
