Fuel Injector Clinic 1650cc Injector Set (is412-1650h) - 2008-2014 Ford Falcon XR6T FG
Step up the fueling capability of your Ford Falcon XR6T FG with the Fuel Injector Clinic 1650cc high-impedance injector set. Designed for serious street and high-horsepower builds, this six-injector set flows 1650cc/min, or 160 lbs/hr, at 43.5 PSI fuel pressure while maintaining the short pulse width control and linearity needed for strong drivability. This application uses the factory-style connector for straightforward drop-in installation with no injector plug conversion required.
Fuel Injector Clinic's 1650cc injector combines substantial fuel flow with excellent idle and part-throttle performance, giving tuners the control needed for powerful street-driven combinations as well as dedicated performance builds. Stainless alloy valve construction provides extensive fuel compatibility, while FIC's proprietary Data Match Technology precisely matches each injector in the set. Plug-and-play Ford ECU data is also available from Fuel Injector Clinic to help streamline calibration.
Specifications
- Part Number: is412-1650h
- Application: Ford Falcon XR6T FG
- Injector Quantity: 6
- Flow Rate: 1650cc/min
- Flow Rate at 43.5 PSI: 160 lbs/hr
- Fuel Pressure Rating: 43.5 PSI / 3 Bar
- Impedance: High impedance / saturated
- Injector Type: Ball and seat
- Valve Construction: Stainless alloy
- Connector: Factory-style connector
- Installation: Drop-in, no injector plug conversion required
- Calibration Fluid: CF-16B
- Test Fuel Temperature: 90 degrees F
- Fuel Compatibility: Pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Injector Matching: Fuel Injector Clinic Data Match Technology
- ECU Data: Plug-and-play Ford ECU data available from Fuel Injector Clinic
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Six 1650cc/min high-impedance fuel injectors
- 160 lbs/hr flow rating at 43.5 PSI fuel pressure
- Designed for the Ford Falcon XR6T FG application
- Factory-style electrical connector for drop-in installation
- No injector plug conversion required for the listed factory application
- Excellent linearity and short pulse width repeatability
- Strong idle and part-throttle control for a large-flow performance injector
- Stainless alloy valve construction for broad fuel compatibility
- Compatible with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Precisely matched using proprietary Fuel Injector Clinic Data Match Technology
- Each injector is individually serial numbered
- Data Match Sheet provides detailed injector matching and latency information
- Flow tested at 43.5 PSI / 3 Bar using CF-16B calibration fluid
- Tested at a fuel temperature of 90 degrees F
- Includes the O-rings required for the listed factory application
- Plug-and-play Ford ECU calibration data available from Fuel Injector Clinic
- Uses brand-new injectors rather than remanufactured or core-program injectors
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
Data Match Technology for Precise Tuning
Large injectors need more than raw flow capacity to deliver good drivability. Fuel Injector Clinic precisely matches this 1650cc set using its proprietary Data Match Technology, with each injector individually serial numbered and its results documented on the supplied Data Match Sheet. Detailed flow matching and latency information gives tuners the data needed to control fuel delivery accurately across all six cylinders, including the short pulse width operating range encountered during idle and part-throttle driving.
Built for High-Horsepower Fuel Demand
The FIC 1650cc high-impedance injector is engineered to deliver the fuel volume required by demanding performance combinations without giving up the low-speed control expected from a street-driven vehicle. Its combination of high flow capacity, short pulse width control, repeatability, and precise matching makes it an excellent choice for Falcon XR6T owners building around gasoline, E85, or compatible race fuels.
Broad Fuel Compatibility
Stainless alloy valve construction allows the 1650cc injector to support a wide range of performance fuels. It is compatible with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels, giving builders flexibility when choosing a fuel system and calibration strategy for street, drag, or other high-performance applications.
Drop-In Falcon XR6T FG Installation
The is412-1650h injector set is configured for the Falcon XR6T FG and uses the factory-style electrical connector, eliminating the need for an injector plug conversion on the listed factory application. Fuel Injector Clinic also supplies the O-rings required for the factory configuration. Vehicles using aftermarket fuel rails or other non-standard fuel-system components should be checked for compatibility before ordering.
Fitment
- 2008 Ford Falcon XR6T FG
- 2009 Ford Falcon XR6T FG
- 2010 Ford Falcon XR6T FG
- 2011 Ford Falcon XR6T FG
- 2012 Ford Falcon XR6T FG
- 2013 Ford Falcon XR6T FG
- 2014 Ford Falcon XR6T FG
FAQs
Does the Fuel Injector Clinic is412-1650h set require injector plug adapters or wiring modifications?
No. Fuel Injector Clinic specifies the is412-1650h set with a factory-style connector and drop-in fitment for the listed Ford Falcon XR6T FG application, so an injector plug conversion is not required.
Are the FIC 1650cc is412-1650h injectors compatible with E85 and race fuel?
Yes. Their stainless alloy valve construction makes them compatible with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels.
Why Buy from Beefcake Racing?
Beefcake Racing has the performance fuel-system experience to help you put together the right combination for your build. Whether you are upgrading a street-driven Falcon XR6T or putting together a serious high-horsepower setup, our team can help with injector selection, fuel-system components, and fitment questions before you order.
Questions about Fuel Injector Clinic part number is412-1650h or your Falcon XR6T fuel system? Email Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
