Fuel Injector Clinic 1200cc Injector Set (is412-1200h) - 2008-2014 Ford Falcon XR6T FG
Give your 2008-2014 Ford Falcon XR6T FG the additional fuel capacity needed for a serious performance build with the Fuel Injector Clinic 1200cc high-impedance injector set. This six-injector package flows 1200cc/min, or 110 lbs/hr, at 43.5 PSI fuel pressure and combines substantial fueling capability with the linearity, short pulse width repeatability, and drivability demanded from a properly tuned street or performance application. Designed specifically for the Falcon XR6T FG, these injectors feature a factory-style connector for easy drop-in installation with no injector plug conversion required.
Fuel Injector Clinic precisely matches every is412-1200h set using proprietary Data Match Technology. Each injector is individually serial numbered, and detailed matching results are supplied on the Data Match Sheet to provide the flow and latency information needed for accurate calibration. FIC also provides plug-and-play Ford ECU data, while the injectors are supplied with the O-rings required for the listed factory application and backed by Fuel Injector Clinic's lifetime warranty against defects in original manufacture.
Specifications
- Part Number: is412-1200h
- Application: Ford Falcon XR6T FG
- Injector Quantity: 6
- Flow Rate: 1200cc/min
- Flow Rate at 43.5 PSI: 110 lbs/hr
- Fuel Pressure Rating: 43.5 PSI / 3 Bar
- Impedance: High impedance / saturated
- Injector Design: Ball and seat
- Connector: Factory-style connector
- Installation: Drop-in, no injector plug conversion required
- Injector Matching: Fuel Injector Clinic Data Match Technology
- Calibration Fluid: CF-16B
- Test Fuel Temperature: 90 degrees F
- ECU Data: Plug-and-play Ford ECU data available from Fuel Injector Clinic
- O-Rings: Includes O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Six 1200cc/min high-impedance fuel injectors for the Ford Falcon XR6T FG
- 110 lbs/hr flow rating at 43.5 PSI fuel pressure
- Factory-style electrical connector for straightforward drop-in installation
- No injector plug conversion required for the listed factory application
- Excellent linearity for predictable fuel delivery across the operating range
- Superior short pulse width control and repeatability for easier calibration
- Precisely matched using Fuel Injector Clinic Data Match Technology
- Each injector is individually serial numbered
- Detailed Data Match Sheet provides injector-specific matching and latency information
- Flow tested and rated at 43.5 PSI / 3 Bar
- Tested at 90 degrees F fuel temperature using CF-16B calibration fluid
- Plug-and-play Ford ECU calibration data available from Fuel Injector Clinic
- Includes the O-rings required for the listed factory application
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
Data Match Technology for Consistent Fuel Delivery
A high-flow injector set needs consistency across every cylinder, not simply a large advertised flow number. Fuel Injector Clinic uses its proprietary Data Match Technology to precisely match the injectors within each is412-1200h set. Every injector is individually serial numbered, and the supplied Data Match Sheet provides detailed flow matching and latency information. This gives tuners accurate injector-specific data for more precise fuel control across all six cylinders.
High-Flow Performance with Street-Friendly Control
The FIC 1200cc injector is engineered to provide the fuel capacity required by modified XR6T combinations while maintaining the control needed at lower engine speeds. Excellent linearity, superior short pulse width behavior, and precise matching help make these injectors easier to tune while supporting smooth idle, predictable part-throttle operation, and strong fuel delivery as engine load and horsepower increase.
Drop-In Falcon XR6T FG Installation
The is412-1200h set is configured specifically for the Ford Falcon XR6T FG and features the factory-style electrical connector, allowing drop-in installation without an injector plug conversion. Fuel Injector Clinic also supplies the O-rings required for the listed factory application. If your Falcon uses an aftermarket fuel rail, intake, or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to verify compatibility with your specific setup.
Fitment
- 2008 Ford Falcon XR6T FG
- 2009 Ford Falcon XR6T FG
- 2010 Ford Falcon XR6T FG
- 2011 Ford Falcon XR6T FG
- 2012 Ford Falcon XR6T FG
- 2013 Ford Falcon XR6T FG
- 2014 Ford Falcon XR6T FG
FAQs
Does the Fuel Injector Clinic is412-1200h require wiring modifications or injector plug adapters?
No. Fuel Injector Clinic specifies the is412-1200h with a factory-style connector and drop-in fitment for the Ford Falcon XR6T FG, so an injector plug conversion is not required for the listed factory application.
What tuning information comes with the FIC is412-1200h injector set?
Each injector is individually serial numbered, and the set includes detailed matching results on a Data Match Sheet. Fuel Injector Clinic also makes plug-and-play Ford ECU data available to provide tuners with the information needed for accurate injector calibration.
Why Buy from Beefcake Racing?
Beefcake Racing specializes in performance parts for serious street and high-horsepower builds. Whether you are upgrading your Falcon XR6T's injectors as part of a larger fuel-system build or choosing components for a new power combination, our experienced team can help make sure you get the right parts for your setup.
Questions about Fuel Injector Clinic part number is412-1200h or your Falcon XR6T fuel system? Email Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
