Fuel Injector Clinic 1000cc Injector Set (is412-1000h) - 2008-2014 Ford Falcon XR6T FG
Upgrade the fueling capability of your 2008-2014 Ford Falcon XR6T FG with the Fuel Injector Clinic 1000cc high-impedance injector set. This matched set of six injectors flows 1000cc/min, or 95 lbs/hr, at 43.5 PSI fuel pressure, providing the additional fuel capacity needed for modified and higher-horsepower XR6T combinations. Excellent linearity, superior short pulse width control, and repeatable fuel delivery help maintain the drivability and tuning control that matter just as much on the street as they do under full boost.
Every is412-1000h set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered, with detailed matching results supplied on the Data Match Sheet to give tuners accurate flow and latency information. The set includes PGTUSC6 solder-in pigtails, while optional PADPUtoJ6 plug-and-play adapters provide an installation option that eliminates the need to cut and solder the factory harness. Plug-and-play Ford ECU data is also available from Fuel Injector Clinic.
Specifications
- Part Number: is412-1000h
- Application: Ford Falcon XR6T FG
- Injector Quantity: 6
- Flow Rate: 1000cc/min
- Flow Rate at 43.5 PSI: 95 lbs/hr
- Fuel Pressure Rating: 43.5 PSI / 3 Bar
- Impedance: High impedance / saturated
- Injector Design: Ball and seat
- Included Connector Solution: PGTUSC6 solder-in pigtails
- Optional Connector Solution: PADPUtoJ6 plug-and-play adapters
- Injector Matching: Fuel Injector Clinic Data Match Technology
- Calibration Fluid: CF-16B
- Test Fuel Temperature: 90 degrees F
- ECU Data: Plug-and-play Ford ECU data available from Fuel Injector Clinic
- O-Rings: Includes O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Six 1000cc/min high-impedance fuel injectors for the Ford Falcon XR6T FG
- 95 lbs/hr flow rating at 43.5 PSI fuel pressure
- Excellent linearity across the injector operating range
- Superior short pulse width control and repeatability for precise calibration
- Precisely matched using Fuel Injector Clinic Data Match Technology
- Each injector is individually serial numbered
- Detailed Data Match Sheet provides flow matching and latency information
- Flow tested and rated at 43.5 PSI / 3 Bar
- Tested at 90 degrees F fuel temperature using CF-16B calibration fluid
- Includes PGTUSC6 solder-in pigtails
- Optional PADPUtoJ6 plug-and-play adapters available for installation without cutting or soldering the factory harness
- Plug-and-play Ford ECU calibration data available from Fuel Injector Clinic
- Includes the O-rings required for the listed factory application
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
Data Match Technology for Precise Tuning
Making more power requires consistent fuel delivery across every cylinder. Fuel Injector Clinic uses proprietary Data Match Technology to precisely match the injectors within each is412-1000h set. Every injector is individually serial numbered, and its results are documented on the supplied Data Match Sheet. The detailed flow matching and latency information gives tuners the data needed to accurately control all six injectors instead of relying on generic injector values.
High-Flow Performance with Excellent Control
The FIC 1000cc injector provides substantially increased fuel capacity while retaining the characteristics needed for a responsive, properly calibrated performance car. Excellent linearity and superior short pulse width control help tuners manage fuel delivery during idle and part-throttle operation while providing the additional flow required as boost, engine load, and horsepower increase.
Flexible Connector Options
The is412-1000h injector set includes PGTUSC6 solder-in pigtails for the required injector connector conversion. For owners who prefer not to cut or solder the factory wiring harness, optional PADPUtoJ6 plug-and-play adapters are available. This gives Falcon XR6T owners the choice between a permanent pigtail installation and a convenient adapter-based connection.
Designed for the Falcon XR6T FG
Fuel Injector Clinic configures this injector set with the O-rings required for the listed factory Falcon XR6T FG application, helping take the guesswork out of injector fitment. If your vehicle uses an aftermarket fuel rail or another non-standard fuel-system configuration, contact Beefcake Racing before ordering so compatibility with your specific setup can be confirmed.
Fitment
- 2008 Ford Falcon XR6T FG
- 2009 Ford Falcon XR6T FG
- 2010 Ford Falcon XR6T FG
- 2011 Ford Falcon XR6T FG
- 2012 Ford Falcon XR6T FG
- 2013 Ford Falcon XR6T FG
- 2014 Ford Falcon XR6T FG
FAQs
What wiring components are included with the Fuel Injector Clinic is412-1000h injector set?
The is412-1000h set includes PGTUSC6 solder-in pigtails. Optional PADPUtoJ6 plug-and-play adapters are available for owners who prefer to complete the connector conversion without cutting or soldering the factory wiring harness.
What tuning information is available for the FIC is412-1000h injectors?
Each injector is individually serial numbered, and detailed flow matching and latency results are supplied on the Data Match Sheet. Fuel Injector Clinic also makes plug-and-play Ford ECU data available to help tuners accurately calibrate the injectors.
Why Buy from Beefcake Racing?
Beefcake Racing specializes in performance parts for serious street and high-horsepower builds. Whether your Falcon XR6T needs injectors as part of a complete fuel-system upgrade or you are choosing components for a new power combination, our experienced team can help you get the right parts for your setup.
Questions about Fuel Injector Clinic part number is412-1000h or your Falcon XR6T fuel system? Email Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
