Fuel Injector Clinic 650cc High-Z Fuel Injector Set (IS412-0650H) - 2008-2014 Ford Falcon XR6T FG
Give your Ford Falcon XR6T FG the precise, consistent fuel delivery a modified Barra deserves with the Fuel Injector Clinic IS412-0650H 650cc injector set. Designed for the 2008-2014 Ford Falcon XR6T FG, this complete set of six saturated, high-impedance ball-and-seat injectors flows 650cc/min, or 62 lbs/hr, at 43.5 PSI (3 Bar). Excellent linearity and short pulse width repeatability help deliver predictable fueling across the operating range, giving tuners the control needed to maintain strong drivability while supporting increased fuel demand.
Every IS412-0650H injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered, and detailed matching and latency results are supplied on the included Data Match Sheet. Fuel Injector Clinic tests and rates these injectors at 43.5 PSI (3 Bar) and 90 degrees F fuel temperature using CF-16B calibration fluid. PGTUSC6 solder-in pigtails are available with the set, while optional PADPUtoJ6 plug-and-play adapters provide an installation option without cutting or soldering the factory harness.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: IS412-0650H
- Application: 2008-2014 Ford Falcon XR6T FG
- Injector Quantity: Set of 6
- Flow Rate: 650cc/min
- Flow Rate at 43.5 PSI: 62 lbs/hr
- Rated Fuel Pressure: 43.5 PSI / 3 Bar
- Impedance: High impedance / High-Z
- Injector Type: Saturated ball-and-seat
- Injector Height: 53mm
- Top O-Ring Diameter: 14mm
- Bottom O-Ring Outer Diameter: 14mm
- Matching: Fuel Injector Clinic Data Match Technology
- Injector Identification: Individually serial numbered
- Included Documentation: Data Match Sheet with flow matching and latency information
- Pigtail Option: PGTUSC6
- Optional Plug-and-Play Adapters: PADPUtoJ6
- Flow Test Pressure: 43.5 PSI / 3 Bar
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- ECU Data: Plug-and-play Ford ECU data available from Fuel Injector Clinic
- O-Rings: Includes O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete set of six 650cc/min performance fuel injectors
- Flows 62 lbs/hr at 43.5 PSI (3 Bar)
- Saturated, high-impedance High-Z design
- Ball-and-seat injector construction
- Excellent linearity for predictable fuel delivery
- Superior short pulse width control and repeatability
- Designed to provide strong drivability with proper calibration
- Precisely matched using Fuel Injector Clinic Data Match Technology
- Each injector is individually serial numbered
- Includes detailed Data Match Sheet with matching and latency information
- Flow tested at 43.5 PSI (3 Bar) and 90 degrees F
- Tested using CF-16B calibration fluid
- PGTUSC6 solder-in pigtail option
- Optional PADPUtoJ6 plug-and-play adapters
- Plug-and-play Ford ECU data available from Fuel Injector Clinic
- Includes the O-rings required for the listed factory application
- Covered by Fuel Injector Clinic's lifetime warranty against manufacturing defects
650cc Performance for the Falcon XR6T FG
The IS412-0650H gives Falcon XR6T FG owners additional fuel capacity while retaining the injector control needed for a responsive street or performance build. Rated at 650cc/min and 62 lbs/hr at 43.5 PSI, these injectors are engineered to provide consistent fuel delivery as engine demand increases. Their linear operating characteristics and short pulse width repeatability also help tuners maintain accurate fueling during idle, cruise, and other lower-load conditions.
Fuel Injector Clinic Data Match Technology
Fuel delivery is only as good as the consistency between injectors. Fuel Injector Clinic uses its proprietary Data Match Technology to precisely match the six injectors in each IS412-0650H set. Every injector is individually serial numbered, with its results documented on the included Data Match Sheet. Detailed flow matching and latency information gives your tuner valuable injector-specific data while helping promote consistent fueling across all six cylinders.
Short Pulse Width Control and Drivability
Injector performance is about more than maximum flow. At idle, cruise, and light throttle, the ECU operates the injectors at much shorter pulse widths, making repeatability and control especially important. The IS412-0650H combines excellent linearity with superior short pulse width performance to help provide predictable fuel delivery throughout the operating range. With proper tuning, that means the added fuel capacity of a performance injector without unnecessarily sacrificing the drivability expected from a street-driven XR6T.
PGTUSC6 Pigtails or PADPUtoJ6 Plug-and-Play Adapters
Fuel Injector Clinic offers the IS412-0650H with PGTUSC6 solder-in pigtails or optional PADPUtoJ6 plug-and-play adapters. The PGTUSC6 option allows the appropriate injector connections to be installed on the vehicle wiring harness. For owners who prefer not to cut or solder the factory harness, the optional PADPUtoJ6 adapters provide a convenient plug-and-play wiring solution.
Flow Tested for Accurate Calibration
Fuel Injector Clinic flow tests and rates these injectors at 43.5 PSI (3 Bar) and 90 degrees F fuel temperature using CF-16B calibration fluid. Combined with individual serial numbering, Data Match Technology, and the supplied matching and latency information, this provides tuners with detailed injector data for accurate calibration. Plug-and-play Ford ECU data is also available from Fuel Injector Clinic.
Fitment
- 2008 Ford Falcon XR6T FG
- 2009 Ford Falcon XR6T FG
- 2010 Ford Falcon XR6T FG
- 2011 Ford Falcon XR6T FG
- 2012 Ford Falcon XR6T FG
- 2013 Ford Falcon XR6T FG
- 2014 Ford Falcon XR6T FG
FAQs
How much do the Fuel Injector Clinic IS412-0650H injectors flow?
The IS412-0650H injectors flow 650cc/min, or 62 lbs/hr, at 43.5 PSI (3 Bar) fuel pressure. The package includes six saturated, high-impedance ball-and-seat injectors matched using Fuel Injector Clinic Data Match Technology.
What wiring options are available with the IS412-0650H injector set?
Fuel Injector Clinic offers PGTUSC6 solder-in pigtails or optional PADPUtoJ6 plug-and-play adapters. The PADPUtoJ6 adapters allow the injectors to be connected without cutting or soldering the factory wiring harness.
Upgrade Your Falcon XR6T with Beefcake Racing
Whether you're upgrading a responsive street-driven Falcon XR6T FG or putting together a more serious turbocharged combination, Beefcake Racing can help you select the right Fuel Injector Clinic injectors and supporting fuel system components for your goals. Call 1-855-827-7223 or email sales@beefcakeracing.com for expert assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
