Fuel Injector Clinic 525cc Fuel Injector Set (IS412-0525H) - 2008-2014 Ford Falcon XR6T FG
Upgrade your 2008-2014 Ford Falcon XR6T FG with the Fuel Injector Clinic IS412-0525H 525cc fuel injector set, engineered to deliver the consistent fuel control a tuned Barra needs without sacrificing street manners. This complete set of six saturated, high-impedance ball-and-seat injectors flows 525cc/min, or 50 lbs/hr, at 43.5 PSI (3 Bar) and 58 lbs/hr at 58 PSI. Excellent linearity and short pulse width repeatability provide predictable fuel delivery across the operating range, helping make these injectors easy to tune while maintaining excellent drivability.
The IS412-0525H is a drop-in solution for size and plug and includes the O-rings required for the listed factory application. Fuel Injector Clinic precisely flow matches each injector set to within 1%, individually numbers every injector, and supplies a detailed flow sheet documenting the results. Each injector is flow tested and rated at 43.5 PSI (3 Bar) with fuel temperature at 90 degrees F using CF-16B calibration fluid. PGTUSC6 pigtails are available, along with optional PADPUtoJ6 plug-and-play adapters, and Fuel Injector Clinic provides plug-and-play Ford ECU data for calibration support.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: IS412-0525H
- Application: 2008-2014 Ford Falcon XR6T FG
- Injector Quantity: Set of 6
- Flow Rate: 525cc/min
- Flow Rate at 43.5 PSI: 50 lbs/hr
- Flow Rate at 58 PSI: 58 lbs/hr
- Rated Fuel Pressure: 43.5 PSI / 3 Bar
- Impedance: High impedance / High-Z
- Injector Type: Saturated ball-and-seat
- Injector Height: 53mm
- Top O-Ring Diameter: 14mm
- Bottom O-Ring Outer Diameter: 14mm
- Fitment: Drop-in for size and plug
- Flow Matching: Precisely flow matched to within 1%
- Injector Identification: Each injector individually numbered
- Included Documentation: Detailed injector flow sheet
- Pigtail Option: PGTUSC6
- Optional Plug-and-Play Adapters: PADPUtoJ6
- Flow Test Pressure: 43.5 PSI / 3 Bar
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- ECU Data: Plug-and-play Ford ECU data available from Fuel Injector Clinic
- O-Rings: Includes O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete set of six 525cc/min performance fuel injectors
- Flows 50 lbs/hr at 43.5 PSI (3 Bar)
- Flows 58 lbs/hr at 58 PSI
- Saturated, high-impedance High-Z injector design
- Ball-and-seat injector construction
- Drop-in for size and plug
- Excellent linearity for consistent fuel delivery
- Superior short pulse width control and repeatability
- Precisely flow matched to within 1%
- Each injector individually numbered
- Detailed flow sheet supplied with the injector set
- Flow tested at 43.5 PSI (3 Bar) and 90 degrees F
- Tested using CF-16B calibration fluid
- PGTUSC6 pigtail option
- Optional PADPUtoJ6 plug-and-play adapters
- Plug-and-play Ford ECU data available from Fuel Injector Clinic
- Includes O-rings required for the listed factory application
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
525cc Performance for the Falcon XR6T FG
The IS412-0525H provides a performance-oriented injector upgrade for Falcon XR6T FG owners who need additional fueling capability while retaining the control required for a responsive street-driven combination. Each injector flows 525cc/min, or 50 lbs/hr, at the standard 43.5 PSI test pressure and increases to 58 lbs/hr at 58 PSI. That additional capacity is paired with the linearity and short pulse width repeatability needed to give your tuner predictable injector behavior throughout the operating range.
Precisely Flow Matched to Within 1%
A quality injector set is about more than the advertised flow number. Fuel Injector Clinic precisely flow matches the six injectors in each IS412-0525H set to within 1%, helping maintain consistent fuel delivery across all six cylinders. Each injector is individually numbered, and its results are recorded on the detailed flow sheet included with the set. That documented matching gives your tuner useful injector-specific information instead of relying solely on a nominal flow rating.
Short Pulse Width Control and Drivability
Performance injectors spend plenty of time operating far below maximum flow. At idle, cruise, and light throttle, accurate operation at short pulse widths becomes critical to maintaining predictable fueling. The IS412-0525H combines tight manufacturing tolerances, excellent linearity, and strong short pulse width repeatability to help provide smooth, controllable fuel delivery. With proper calibration, you get increased injector capacity while retaining the drivability expected from a well-sorted street car.
Drop-In Installation
Fuel Injector Clinic specifies the IS412-0525H as a drop-in solution for size and plug for the Falcon XR6T FG application. The injectors are supplied with the O-rings required for the listed factory application. PGTUSC6 pigtails are available, and optional PADPUtoJ6 plug-and-play adapters can also be selected. For aftermarket fuel rails, intake configurations, or other non-standard installations, fitment should be confirmed before ordering.
Flow Tested for Accurate Calibration
Fuel Injector Clinic flow tests and rates these injectors at 43.5 PSI (3 Bar) and 90 degrees F fuel temperature using CF-16B calibration fluid. The controlled testing process, individual injector numbering, precise flow matching, and supplied flow data provide valuable information for accurate calibration. Plug-and-play Ford ECU data is also available from Fuel Injector Clinic to further support the tuning process.
Fitment
- 2008 Ford Falcon XR6T FG
- 2009 Ford Falcon XR6T FG
- 2010 Ford Falcon XR6T FG
- 2011 Ford Falcon XR6T FG
- 2012 Ford Falcon XR6T FG
- 2013 Ford Falcon XR6T FG
- 2014 Ford Falcon XR6T FG
FAQs
How much do the Fuel Injector Clinic IS412-0525H injectors flow?
The IS412-0525H injectors flow 525cc/min, or 50 lbs/hr, at 43.5 PSI (3 Bar) fuel pressure. Fuel Injector Clinic also specifies a flow rate of 58 lbs/hr at 58 PSI.
Are the IS412-0525H injectors a drop-in fit for the Ford Falcon XR6T FG?
Yes. Fuel Injector Clinic specifies the IS412-0525H as drop-in for size and plug for the listed Falcon XR6T FG application. The injectors include the O-rings required for the factory application, with PGTUSC6 pigtails and optional PADPUtoJ6 plug-and-play adapters also available.
Upgrade Your Falcon XR6T with Beefcake Racing
Whether you're upgrading a responsive street-driven Falcon XR6T FG or building a more serious turbocharged combination, Beefcake Racing can help you select the right Fuel Injector Clinic injectors and supporting fuel system components for your goals. Call 1-855-827-7223 or email sales@beefcakeracing.com for expert assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
