Fuel Injector Clinic 775cc High-Z Fuel Injector Set (IS411-0775H) - 2002-2010 Ford Falcon XR6T BA/BF
Upgrade your turbocharged Falcon with a matched injector set built to deliver the fuel capacity and control a performance Barra combination demands. The Fuel Injector Clinic IS411-0775H is a complete set of six 775cc/min saturated, high-impedance ball-and-seat injectors for the 2002-2010 Ford Falcon XR6T BA/BF. Each injector flows 775cc/min, or 74 lbs/hr, at 43.5 psi (3 Bar), providing increased fueling capability while maintaining the excellent linearity and short pulse width repeatability needed for accurate tuning and strong street drivability.
Every IS411-0775H set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered, and its results are documented on the included Data Match Sheet with detailed flow matching and latency information. FIC flow tests and rates these injectors at 43.5 psi (3 Bar) and 90 degrees F fuel temperature using CF-16B calibration fluid. PGTUSC6 solder-in pigtails are available with the set, or optional PADPUtoJ6 plug-and-play adapters can be selected for an installation without cutting or soldering the factory harness. Plug-and-play Ford ECU data is also available from Fuel Injector Clinic.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: IS411-0775H
- Application: Ford Falcon XR6T BA/BF
- Injector Quantity: Set of 6
- Flow Rate: 775cc/min
- Flow Rate: 74 lbs/hr at 43.5 psi
- Rated Fuel Pressure: 43.5 psi / 3 Bar
- Impedance: High impedance / High-Z
- Injector Type: Saturated ball-and-seat
- Matching: Fuel Injector Clinic Data Match Technology
- Pigtail Option: PGTUSC6
- Optional Plug-and-Play Adapters: PADPUtoJ6
- Flow Test Pressure: 43.5 psi / 3 Bar
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- ECU Data: Plug-and-play Ford ECU data available from Fuel Injector Clinic
- O-Rings: Includes O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete set of six 775cc/min performance fuel injectors
- 74 lbs/hr flow rating at 43.5 psi (3 Bar)
- Saturated, high-impedance High-Z design
- Ball-and-seat injector construction
- Excellent injector linearity
- Strong short pulse width repeatability
- Superior short pulse width control for accurate low-load fueling
- Designed for easy tuning and excellent drivability
- Precisely matched using Fuel Injector Clinic proprietary Data Match Technology
- Each injector is individually serial numbered
- Includes Data Match Sheet with detailed flow matching and latency information
- Flow tested at 43.5 psi (3 Bar) and 90 degrees F
- Tested using CF-16B calibration fluid
- PGTUSC6 solder-in pigtail option
- Optional PADPUtoJ6 plug-and-play adapters
- Plug-and-play Ford ECU data available from Fuel Injector Clinic
- Includes O-rings required for the listed factory application
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
775cc Performance for the Falcon XR6T
The IS411-0775H provides a substantial increase in injector capacity for modified Falcon XR6T applications without sacrificing the control characteristics needed during normal street operation. Each injector is rated at 775cc/min, or 74 lbs/hr, at 43.5 psi (3 Bar). The combination of increased flow, High-Z operation, excellent linearity, and repeatable short pulse width behavior gives tuners a strong foundation for accurately controlling fuel delivery across the engine's operating range.
Data Match Technology
Consistent injector performance across all six cylinders becomes increasingly important as airflow, boost, and fuel demand rise. Fuel Injector Clinic precisely matches each IS411-0775H set using its proprietary Data Match Technology. Every injector is individually serial numbered, and the included Data Match Sheet documents detailed flow matching and latency information. This provides useful injector data for calibration while helping maintain consistent fuel delivery from cylinder to cylinder.
Short Pulse Width Control and Drivability
Maximum injector flow only tells part of the story. A performance injector must also accurately deliver small quantities of fuel during idle, cruising, part throttle, and transient operation. The IS411-0775H combines excellent linearity with superior short pulse width control and repeatability, helping the ECU maintain predictable fuel delivery when injector pulse widths are short. With proper calibration, that translates into the drivability expected from a street-driven XR6T while retaining the additional fuel capacity required when boost and engine load increase.
PGTUSC6 Pigtails or PADPUtoJ6 Plug-and-Play Adapters
Fuel Injector Clinic provides two wiring solutions for the IS411-0775H. PGTUSC6 solder-in pigtails allow the injector connections on the vehicle harness to be converted for use with these injectors. Builders who prefer not to cut or solder the factory wiring can select optional PADPUtoJ6 plug-and-play adapters instead. This gives you the flexibility to choose the connector solution that best matches your installation.
Fitment
- 2002 Ford Falcon XR6T BA/BF
- 2003 Ford Falcon XR6T BA/BF
- 2004 Ford Falcon XR6T BA/BF
- 2005 Ford Falcon XR6T BA/BF
- 2006 Ford Falcon XR6T BA/BF
- 2007 Ford Falcon XR6T BA/BF
- 2008 Ford Falcon XR6T BA/BF
- 2009 Ford Falcon XR6T BA/BF
- 2010 Ford Falcon XR6T BA/BF
FAQs
How much do the FIC IS411-0775H injectors flow?
Fuel Injector Clinic rates the IS411-0775H at 775cc/min, or 74 lbs/hr, at 43.5 psi (3 Bar) fuel pressure. The set contains six saturated, high-impedance ball-and-seat injectors precisely matched using FIC Data Match Technology.
What wiring options are available for the IS411-0775H?
PGTUSC6 solder-in pigtails are available for converting the injector connections on the vehicle harness. Optional PADPUtoJ6 plug-and-play adapters provide an alternative that allows installation without cutting or soldering the factory harness.
Upgrade Your Falcon XR6T Fuel System with Beefcake Racing
Whether you're upgrading a street-driven XR6T or putting together a higher-output turbo combination, Beefcake Racing can help you select the right Fuel Injector Clinic injectors and supporting fuel system components for your build. Call 1-855-827-7223 or email sales@beefcakeracing.com for expert assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
