Fuel Injector Clinic 1650cc High-Z Injector Set (is409-1650h) - 2017-2019 Ford Raptor
Give your 2017-2019 Ford Raptor the fuel capacity to support a serious performance build with the Fuel Injector Clinic 1650cc High-Z injector set. This matched set of six injectors flows 1650cc/min, or 160 lbs/hr, at 43.5 PSI fuel pressure, providing substantial fueling capability for high-horsepower combinations while retaining excellent idle performance and drivability. Saturated high-impedance ball and seat construction, excellent linearity, and superior short pulse width repeatability help deliver the precise injector control your tuner needs from idle and part throttle through demanding high-load operation.
The is409-1650h uses stainless-alloy valve construction for broad fuel compatibility and is suitable for pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. Each set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology, with every injector individually serial numbered and detailed flow matching and latency results supplied on the Data Match Sheet. FIC flow tests and rates these injectors at 43.5 PSI / 3 Bar and 90 degrees F fuel temperature using CF-16B calibration fluid. Drop-in plug fitment simplifies installation, and the injectors include the O-rings required for the factory application.
Specifications
- Part Number: is409-1650h
- Injector Quantity: 6
- Flow Rate: 1650cc/min
- Flow Rate at 43.5 PSI: 160 lbs/hr
- Fuel Pressure Rating: 43.5 PSI / 3 Bar
- Impedance: High impedance / saturated
- Injector Design: Ball and seat
- Valve Construction: Stainless alloy
- Fitment: Drop-in plug fitment
- Injector Matching: Fuel Injector Clinic Data Match Technology
- Calibration Fluid: CF-16B
- Test Fuel Temperature: 90 degrees F
- Fuel Compatibility: Pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- O-Rings: Includes O-rings required for the factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete matched set of six 1650cc/min performance fuel injectors
- 160 lbs/hr flow rating at 43.5 PSI fuel pressure
- High-flow fueling capability for serious performance Raptor builds
- Saturated high-impedance ball and seat injector construction
- Excellent idle performance for street-driven vehicles
- Excellent linearity for predictable fuel delivery
- Superior short pulse width control and repeatability
- Stainless-alloy valve construction for broad fuel compatibility
- Compatible with pump gasoline and E85
- Compatible with Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Precisely matched using Fuel Injector Clinic Data Match Technology
- Each injector is individually serial numbered
- Data Match Sheet provides detailed flow matching and latency information
- Drop-in plug fitment for straightforward installation
- Flow tested and rated at 43.5 PSI / 3 Bar
- Tested at 90 degrees F fuel temperature using CF-16B calibration fluid
- Includes O-rings required for the factory application
- Designed for accurate tuning and strong drivability
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
1650cc Fuel Capacity with Street-Friendly Control
The FIC is409-1650h is built for Raptor combinations that need serious fuel delivery without treating low-speed injector control as an afterthought. At 1650cc/min per injector, the set provides substantial capacity for higher-horsepower builds on both gasoline and E85 while maintaining excellent idle performance. That combination of high flow and precise control makes the 1650cc injector a strong choice for performance trucks that still need to behave properly away from wide-open throttle.
Data Match Technology for Precise Calibration
Consistent fuel delivery across all six cylinders becomes increasingly important as injector size and engine output increase. Fuel Injector Clinic precisely matches each is409-1650h set using proprietary Data Match Technology. Every injector is individually serial numbered, and detailed flow matching and latency results are supplied on the Data Match Sheet. This provides your tuner with valuable injector-specific information for accurate calibration and consistent cylinder-to-cylinder fuel delivery.
Broad Fuel Compatibility
Stainless-alloy valve construction gives the FIC 1650cc injector broad fuel compatibility for street and race applications. Fuel Injector Clinic specifies compatibility with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. This makes the is409-1650h a versatile fueling option for Raptor builds that may use different fuels as their performance combination evolves.
Drop-In Plug Fitment
The is409-1650h features drop-in plug fitment for the listed 2017-2019 Ford Raptor application, eliminating the need for an injector connector conversion. Fuel Injector Clinic also supplies the O-rings required for the factory application. If your truck uses aftermarket fuel rails or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to verify proper injector fitment.
Fitment
- 2017 Ford Raptor
- 2018 Ford Raptor
- 2019 Ford Raptor
FAQs
What fuels are compatible with FIC is409-1650h 1650cc injectors?
Fuel Injector Clinic specifies compatibility with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. The stainless-alloy valve construction provides broad fuel compatibility for street and race applications.
Do the FIC is409-1650h injectors require a plug conversion?
No. Fuel Injector Clinic specifies drop-in plug fitment for the is409-1650h in the listed 2017-2019 Ford Raptor application, eliminating the need for an injector connector conversion.
Why Buy from Beefcake Racing?
Beefcake Racing specializes in Ford performance and the fuel-system components required to support everything from modified street trucks to serious high-horsepower builds. Selecting the correct injector size and supporting fuel-system components is critical to reliable fuel delivery, accurate tuning, and strong drivability. Our experienced team can help you select the right fuel-system combination for your Raptor's engine setup, fuel choice, and performance goals.
Questions about Fuel Injector Clinic part number is409-1650h or your Ford Raptor fuel system? Email Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
