Fuel Injector Clinic 1440cc High-Z Injector Set (is409-1440h) - 2017-2019 Ford Raptor
Step up the fueling capability of your 2017-2019 Ford Raptor with the Fuel Injector Clinic 1440cc High-Z injector set. Designed for performance builds that have outgrown smaller injectors but still demand excellent street manners, this matched set of six injectors flows 1440cc/min, or 140 lbs/hr, at 43.5 PSI fuel pressure. High-impedance ball and seat construction, excellent linearity, and precise short pulse width control give your tuner the predictable fuel delivery needed for smooth idle, responsive part-throttle operation, and serious power under boost.
The is409-1440h combines substantial fuel capacity with stainless-alloy valve construction and broad fuel compatibility, including pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. Each injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology, with every injector individually serial numbered and detailed flow matching and latency information supplied on the Data Match Sheet. FIC flow tests and rates these injectors at 43.5 PSI / 3 Bar and 90 degrees F fuel temperature using CF-16B calibration fluid. Drop-in plug fitment further simplifies installation in the listed Raptor application.
Specifications
- Part Number: is409-1440h
- Injector Quantity: 6
- Flow Rate: 1440cc/min
- Flow Rate at 43.5 PSI: 140 lbs/hr
- Fuel Pressure Rating: 43.5 PSI / 3 Bar
- Impedance: High impedance / saturated
- Injector Design: Ball and seat
- Valve Construction: Stainless alloy
- Connector Fitment: Drop-in plug fitment
- Injector Matching: Fuel Injector Clinic Data Match Technology
- Calibration Fluid: CF-16B
- Test Fuel Temperature: 90 degrees F
- Fuel Compatibility: Pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- O-Rings: Includes O-rings required for the factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Matched set of six 1440cc/min performance fuel injectors
- 140 lbs/hr flow rating at 43.5 PSI fuel pressure
- High-impedance saturated injector design
- Ball and seat injector construction
- Excellent idle performance for street-driven Raptor builds
- Substantial fuel capacity for higher-horsepower applications
- Excellent injector linearity for predictable fuel delivery
- Superior short pulse width control and repeatability
- Stainless-alloy valve construction
- Compatible with pump gasoline and E85
- Compatible with Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Precisely matched using Fuel Injector Clinic Data Match Technology
- Each injector is individually serial numbered
- Data Match Sheet provides detailed flow matching and latency information
- Drop-in factory-style connector fitment with no plug conversion required
- Flow tested and rated at 43.5 PSI / 3 Bar
- Tested at 90 degrees F fuel temperature using CF-16B calibration fluid
- Includes O-rings required for the factory application
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
Serious Fuel Capacity Without Sacrificing Drivability
The 1440cc injector fills the gap between FIC's 1200cc and 1650cc offerings, making it a strong option for Raptor owners who need significantly more fuel capacity without automatically stepping into an even larger injector. Fuel Injector Clinic specifically engineers the 1440cc High-Z injector for excellent idle performance while maintaining the fuel delivery required for higher-horsepower combinations on both gasoline and E85.
Data Match Technology for Precise Fuel Delivery
Injector flow capacity is only part of the equation in a properly calibrated performance fuel system. Fuel Injector Clinic precisely matches each is409-1440h set using proprietary Data Match Technology. Every injector is individually serial numbered, and the included Data Match Sheet provides detailed flow matching and latency information. This gives your tuner accurate injector data for consistent cylinder-to-cylinder fueling and more precise calibration.
Excellent Short Pulse Width Control
Large injectors still need to accurately deliver very small amounts of fuel during idle and light-throttle operation. The FIC 1440cc injector combines high flow capacity with excellent linearity and short pulse width repeatability, helping your tuner maintain controlled fueling throughout the operating range. The result is an injector designed to support serious power without giving up the drivability expected from a street-driven performance truck.
Broad Fuel Compatibility
Stainless-alloy valve construction gives the is409-1440h broad compatibility with performance fuels. Fuel Injector Clinic specifies compatibility with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels, making this injector set suitable for a wide range of street, flex-fuel, and race-oriented Raptor combinations.
Drop-In Plug Fitment
The is409-1440h features drop-in plug fitment for the listed Ford Raptor application, so no injector plug conversion is required. The set also includes the O-rings required for the factory application. If your Raptor uses aftermarket fuel rails or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to confirm proper injector fitment.
Fitment
- 2017 Ford Raptor
- 2018 Ford Raptor
- 2019 Ford Raptor
FAQs
What fuels can I use with FIC is409-1440h injectors?
Fuel Injector Clinic specifies the 1440cc High-Z injector as compatible with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. Its stainless-alloy valve construction provides broad fuel compatibility for street and race applications.
Do FIC is409-1440h injectors require wiring modifications?
No. The is409-1440h features drop-in plug fitment for the listed 2017-2019 Ford Raptor application, so an injector plug conversion is not required.
Why Buy from Beefcake Racing?
Beefcake Racing specializes in Ford performance and the fuel-system components needed to support everything from modified street trucks to serious high-horsepower builds. Choosing the correct injector size is critical to maintaining adequate fuel delivery without sacrificing tuning control or drivability. Our experienced team can help you match the right injectors and supporting fuel-system components to your Raptor's combination, fuel choice, and performance goals.
Questions about Fuel Injector Clinic part number is409-1440h or your Ford Raptor fuel system? Email Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
