Fuel Injector Clinic 1200cc High-Z Injector Set (is409-1200h) - 2017-2019 Ford Raptor
Step up the fuel delivery in your 2017-2019 Ford Raptor with the Fuel Injector Clinic 1200cc High-Z injector set. Designed for performance builds that have moved well beyond the capacity of the factory fuel injectors, this matched set of six injectors flows 1200cc/min, or 110 lbs/hr, at 43.5 PSI fuel pressure. Saturated high-impedance ball and seat construction combines serious fueling capacity with excellent linearity and short pulse width repeatability, giving your tuner the precise injector control needed for strong drivability across the operating range.
The is409-1200h is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered, with detailed flow matching and latency information supplied on the Data Match Sheet. FIC flow tests and rates these injectors at 43.5 PSI / 3 Bar and 90 degrees F fuel temperature using CF-16B calibration fluid. The set includes PGTJETR6 pigtails for the required injector plug conversion, or optional PADPJtoU6 plug-and-play adapters can be added for installation without cutting or soldering the factory wiring harness.
Specifications
- Part Number: is409-1200h
- Injector Quantity: 6
- Flow Rate: 1200cc/min
- Flow Rate at 43.5 PSI: 110 lbs/hr
- Fuel Pressure Rating: 43.5 PSI / 3 Bar
- Impedance: High impedance / saturated
- Injector Design: Ball and seat
- Injector Matching: Fuel Injector Clinic Data Match Technology
- Included Pigtails: PGTJETR6
- Optional Plug-and-Play Adapters: PADPJtoU6
- Calibration Fluid: CF-16B
- Test Fuel Temperature: 90 degrees F
- O-Rings: Includes O-rings required for the factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete matched set of six 1200cc/min performance fuel injectors
- 110 lbs/hr flow rating at 43.5 PSI fuel pressure
- Saturated high-impedance ball and seat injector construction
- Serious fuel capacity for modified and high-performance Ford Raptor builds
- Excellent linearity for predictable fuel delivery
- Superior short pulse width control and repeatability
- Precisely matched using Fuel Injector Clinic Data Match Technology
- Each injector is individually serial numbered
- Data Match Sheet provides detailed flow matching and latency information
- Includes PGTJETR6 injector wiring pigtails
- Optional PADPJtoU6 adapters provide a plug-and-play connection to the factory harness
- Flow tested and rated at 43.5 PSI / 3 Bar
- Tested at 90 degrees F fuel temperature using CF-16B calibration fluid
- Includes O-rings required for the factory application
- Designed for accurate tuning and excellent drivability
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
1200cc Fueling for Serious Raptor Performance
As boost, airflow, and engine output increase, maintaining adequate fuel delivery becomes critical. The FIC is409-1200h provides the substantial injector capacity required by demanding performance combinations while retaining the precise low-flow behavior needed for a properly calibrated street-driven truck. With 1200cc/min of flow capacity per injector, this set gives performance-focused Raptor builds significantly greater fueling capability while maintaining the controllability needed throughout the operating range.
Data Match Technology for Precise Calibration
Injector consistency becomes increasingly important as fuel demand and engine output rise. Fuel Injector Clinic precisely matches each is409-1200h set using proprietary Data Match Technology. Every injector is individually serial numbered, and detailed flow matching and latency results are supplied on the Data Match Sheet. This gives your tuner valuable injector-specific information for accurate calibration and consistent cylinder-to-cylinder fuel delivery.
Excellent Short Pulse Width Control
A high-flow injector still needs to accurately meter small quantities of fuel during idle, cruise, and light-throttle operation. Fuel Injector Clinic combines the 1200cc injector's substantial flow capacity with excellent linearity and superior short pulse width repeatability. That balance helps provide predictable injector response for easier tuning and strong drivability instead of focusing solely on maximum fuel volume.
Pigtails Included with Plug-and-Play Adapter Option
The is409-1200h requires an injector plug conversion when installed using the supplied PGTJETR6 pigtails. The included pigtails can be soldered into the vehicle wiring harness to replace the existing injector connectors. For owners who prefer not to cut or solder the factory harness, optional PADPJtoU6 plug-and-play adapters can be added to connect the injectors without permanent wiring modifications.
Fuel Injector Clinic chooses to use brand-new, unused injectors for its performance applications rather than relying on remanufactured or core-program injectors. The required connector conversion allows FIC to maintain this approach while supplying the injector technology and performance characteristics specified for this application.
Fitment
- 2017 Ford Raptor
- 2018 Ford Raptor
- 2019 Ford Raptor
Fitment Note: This injector set is designed for the title-listed 2017-2019 Ford Raptor application. If your truck uses aftermarket fuel rails or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to verify proper injector fitment.
FAQs
Do the FIC is409-1200h injectors require a plug conversion?
Yes. The set includes PGTJETR6 pigtails that can be soldered into the vehicle wiring harness to replace the existing injector plugs. If you prefer not to modify the factory harness, optional PADPJtoU6 plug-and-play adapters can be added.
How much do the FIC is409-1200h injectors flow?
The is409-1200h injectors are rated at 1200cc/min, or 110 lbs/hr, at 43.5 PSI / 3 Bar fuel pressure. Fuel Injector Clinic flow tests the injectors at 90 degrees F fuel temperature using CF-16B calibration fluid.
Why Buy from Beefcake Racing?
Beefcake Racing specializes in Ford performance and the fuel-system components required to support everything from modified street trucks to serious high-horsepower builds. Choosing the correct injector size and supporting fuel-system components is critical to reliable fuel delivery, accurate tuning, and strong drivability. Our experienced team can help you select the right fuel-system combination for your Raptor's engine setup and performance goals.
Questions about Fuel Injector Clinic part number is409-1200h or your Ford Raptor fuel system? Email Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
