Fuel Injector Clinic 1000cc High-Z Injector Set (is409-1000h) - 2017-2019 Ford Raptor
Upgrade the fuel delivery in your 2017-2019 Ford Raptor with the Fuel Injector Clinic 1000cc High-Z injector set. This matched set of six injectors flows 1000cc/min, or 95 lbs/hr, at 43.5 PSI fuel pressure, providing substantial fueling capability for modified and high-performance Raptor builds while retaining the precise injector control needed for excellent drivability. High-impedance ball and seat construction, excellent linearity, and strong short pulse width repeatability give your tuner predictable fuel delivery from idle and part throttle through demanding high-load operation.
The is409-1000h combines increased fuel capacity with straightforward drop-in plug fitment. Each set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology, with every injector individually serial numbered and detailed flow matching and latency results supplied on the Data Match Sheet. FIC flow tests and rates these injectors at 43.5 PSI / 3 Bar and 90 degrees F fuel temperature using CF-16B calibration fluid. The injectors are supplied with the O-rings required for the factory application and are backed by Fuel Injector Clinic's lifetime warranty against failure caused by defects in original manufacture.
Specifications
- Part Number: is409-1000h
- Injector Quantity: 6
- Flow Rate: 1000cc/min
- Flow Rate at 43.5 PSI: 95 lbs/hr
- Fuel Pressure Rating: 43.5 PSI / 3 Bar
- Impedance: High impedance / saturated
- Injector Design: Ball and seat
- Fitment: Drop-in plug fitment
- Injector Matching: Fuel Injector Clinic Data Match Technology
- Calibration Fluid: CF-16B
- Test Fuel Temperature: 90 degrees F
- O-Rings: Includes O-rings required for the factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete matched set of six 1000cc/min performance fuel injectors
- 95 lbs/hr flow rating at 43.5 PSI fuel pressure
- Saturated high-impedance ball and seat injector design
- Substantial fuel capacity for modified and high-performance Ford Raptor builds
- Excellent linearity for predictable fuel delivery
- Superior short pulse width control and repeatability
- Precisely matched using Fuel Injector Clinic Data Match Technology
- Each injector is individually serial numbered
- Data Match Sheet provides detailed flow matching and latency information
- Drop-in plug fitment for straightforward installation
- Flow tested and rated at 43.5 PSI / 3 Bar
- Tested at 90 degrees F fuel temperature using CF-16B calibration fluid
- Includes O-rings required for the factory application
- Designed for accurate tuning and excellent drivability
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
1000cc Fuel Capacity with Precise Control
A performance injector needs to deliver more than additional fuel at high engine loads. Precise fuel metering during idle, cruising, and throttle transitions remains critical to drivability and calibration quality. The FIC is409-1000h combines 1000cc/min flow capacity with excellent linearity and superior short pulse width control, helping the ECU accurately manage fuel delivery across a broad operating range while providing the additional capacity demanded by higher-performance combinations.
Data Match Technology for Accurate Tuning
Consistent injector behavior across all six cylinders is critical to a properly calibrated performance engine. Fuel Injector Clinic precisely matches each is409-1000h set using proprietary Data Match Technology. Every injector is individually serial numbered, and detailed flow matching and latency results are supplied on the Data Match Sheet. This gives your tuner valuable injector-specific information for accurate calibration and consistent cylinder-to-cylinder fuel delivery.
Tested for Predictable Performance
Fuel Injector Clinic flow tests and rates these injectors at 43.5 PSI / 3 Bar and 90 degrees F fuel temperature using CF-16B calibration fluid. Combined with state-of-the-art matching and excellent short pulse width control, this controlled testing helps provide predictable injector behavior that supports easier tuning and strong drivability in performance-oriented Raptor applications.
Drop-In Plug Fitment
The is409-1000h is engineered with drop-in plug fitment for the listed 2017-2019 Ford Raptor application, helping simplify installation while retaining the correct application-specific injector configuration. Fuel Injector Clinic also supplies the O-rings required for the factory application. If your Raptor uses aftermarket fuel rails or another non-standard fuel-system configuration, verify injector fitment before ordering.
Fitment
- 2017 Ford Raptor
- 2018 Ford Raptor
- 2019 Ford Raptor
FAQs
How much does the FIC is409-1000h injector set flow?
The is409-1000h is a six-injector set rated at 1000cc/min, or 95 lbs/hr, at 43.5 PSI / 3 Bar fuel pressure. Fuel Injector Clinic flow tests the injectors at 90 degrees F fuel temperature using CF-16B calibration fluid.
How are the FIC is409-1000h injectors matched?
Fuel Injector Clinic precisely matches the set using proprietary Data Match Technology. Each injector is individually serial numbered, and detailed flow matching and latency results are supplied on the Data Match Sheet to support accurate calibration.
Why Buy from Beefcake Racing?
Beefcake Racing specializes in Ford performance and the fuel-system components required to support everything from modified street trucks to serious high-horsepower builds. Selecting the correct injector size and supporting fuel-system components is critical to reliable fuel delivery, accurate tuning, and strong drivability. Our experienced team can help you choose the right combination for your Raptor's engine setup and performance goals.
Questions about Fuel Injector Clinic part number is409-1000h or your Ford Raptor fuel system? Email Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
