Fuel Injector Clinic 1650cc High-Z Injector Set (is408-1650h) - 2010-2014 Ford Raptor
Give your 2010-2014 Ford Raptor the fuel capacity to support serious horsepower with the Fuel Injector Clinic 1650cc High-Z injector set. This matched set of eight injectors flows 1650cc/min, or 160 lbs/hr, at 43.5 PSI fuel pressure, combining substantial fuel delivery with the precise low-speed control needed for a well-mannered performance build. Excellent linearity and short pulse width repeatability help maintain accurate fueling from idle and part throttle through high-load operation, making these injectors equally focused on tunability, drivability, and outright performance.
The is408-1650h uses stainless-alloy valve construction and is compatible with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. Each set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology, with every injector individually serial numbered and detailed flow matching and latency results supplied on the Data Match Sheet. FIC flow tests and rates these injectors at 43.5 PSI / 3 Bar and 90 degrees F fuel temperature using CF-16B calibration fluid. Factory-style electrical connectors provide drop-in, plug-and-play installation with no plug conversion required, and plug-and-play Ford ECU data is available from Fuel Injector Clinic.
Specifications
- Part Number: is408-1650h
- Injector Quantity: 8
- Flow Rate: 1650cc/min
- Flow Rate at 43.5 PSI: 160 lbs/hr
- Fuel Pressure Rating: 43.5 PSI / 3 Bar
- Impedance: High impedance / saturated
- Injector Design: Ball and seat
- Valve Construction: Stainless alloy
- Fitment: Drop-in for the listed factory application
- Electrical Connection: Factory-style connector, no plug conversion required
- Injector Matching: Fuel Injector Clinic Data Match Technology
- Calibration Fluid: CF-16B
- Test Fuel Temperature: 90 degrees F
- Fuel Compatibility: Pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- ECU Data: Plug-and-play Ford ECU data available from Fuel Injector Clinic
- O-Rings: Includes O-rings required for the factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete matched set of eight 1650cc/min performance fuel injectors
- 160 lbs/hr flow rating at 43.5 PSI fuel pressure
- Saturated high-impedance ball and seat injector design
- Substantial fuel capacity for high-horsepower Ford Raptor builds
- Stainless-alloy valve construction supports broad fuel compatibility
- Compatible with gasoline and E85
- Compatible with Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Excellent idle characteristics for a high-flow performance injector
- Excellent linearity for predictable fuel delivery
- Superior short pulse width control and repeatability
- Precisely matched using Fuel Injector Clinic Data Match Technology
- Each injector is individually serial numbered
- Data Match Sheet provides detailed flow matching and latency information
- Drop-in fitment with factory-style electrical connectors
- No injector plug conversion required
- Flow tested and rated at 43.5 PSI / 3 Bar
- Tested at 90 degrees F fuel temperature using CF-16B calibration fluid
- Plug-and-play Ford ECU calibration data available from Fuel Injector Clinic
- Includes O-rings required for the factory application
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
1650cc Fuel Capacity Without Sacrificing Drivability
Big injectors are easy to judge by maximum flow, but the real challenge is maintaining precise fuel control when the engine only needs a small portion of that capacity. Fuel Injector Clinic's 1650cc High-Z injector is engineered to provide the fuel volume demanded by high-horsepower combinations while retaining excellent idle performance and short pulse width control. That combination gives performance Raptor owners the headroom needed for aggressive builds without treating low-speed drivability as an afterthought.
Data Match Technology for Precise Tuning
Accurate cylinder-to-cylinder fueling becomes increasingly important as horsepower and fuel demand rise. Fuel Injector Clinic precisely matches each is408-1650h set using proprietary Data Match Technology. Every injector is individually serial numbered, and its results are documented on the supplied Data Match Sheet with detailed flow matching and latency information. This provides your tuner with valuable injector-specific data for more accurate calibration throughout the operating range.
Broad Fuel Compatibility for Flexible Builds
The stainless-alloy valve construction of the FIC 1650cc injector allows it to work with a wide range of performance fuels. Fuel Injector Clinic specifies compatibility with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. That broad compatibility gives Raptor owners greater flexibility when building a fuel system around current performance goals while leaving room for future changes in fuel choice or engine combination.
Drop-In Installation with Factory-Style Connectors
The is408-1650h is designed as a drop-in injector set for the listed 2010-2014 Ford Raptor application and uses factory-style electrical connectors. No injector plug conversion is required, eliminating the need to cut or solder the factory wiring harness or add electrical adapters. FIC also supplies the O-rings required for the factory application, while available plug-and-play Ford ECU data helps give your tuner the information needed for proper calibration.
Fitment
- 2010 Ford F-150 Raptor
- 2011 Ford F-150 Raptor
- 2012 Ford F-150 Raptor
- 2013 Ford F-150 Raptor
- 2014 Ford F-150 Raptor
Fitment Note: This injector set is designed for the title-listed 2010-2014 Ford Raptor application. If your truck uses aftermarket fuel rails or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to verify proper injector fitment.
FAQs
Do the FIC is408-1650h injectors require a plug conversion?
No. Fuel Injector Clinic designed the is408-1650h with factory-style electrical connectors for the listed 2010-2014 Ford Raptor application. The injectors provide drop-in fitment with no injector plug conversion required.
What fuels are compatible with FIC is408-1650h 1650cc injectors?
Fuel Injector Clinic specifies the 1650cc High-Z injector for use with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. Its stainless-alloy valve construction provides broad fuel compatibility for street and race applications.
Why Buy from Beefcake Racing?
Beefcake Racing specializes in Ford performance and the fuel-system components required to support everything from modified street trucks to serious high-horsepower builds. Choosing the correct injector size, fuel system, and supporting components is critical to reliable fuel delivery, accurate tuning, and strong drivability. Our experienced team can help you select the right combination for your Raptor's engine setup, fuel choice, and performance goals.
Questions about Fuel Injector Clinic part number is408-1650h or your Ford Raptor fuel system? Email Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
