Fuel Injector Clinic 1440cc High-Z Injector Set (is408-1440h) - 2010-2014 Ford Raptor
Give your 2010-2014 Ford Raptor the fuel capacity to support serious performance with the Fuel Injector Clinic 1440cc High-Z injector set. This matched set of eight injectors flows 1440cc/min, or 140 lbs/hr, at 43.5 PSI fuel pressure, providing substantial fueling capability while maintaining the precise low-speed control needed for excellent drivability. Designed to bridge the gap between FIC's 1200cc and 1650cc injectors, the 1440cc offers plenty of fueling headroom for high-horsepower combinations while retaining excellent idle performance for street-driven trucks.
The is408-1440h features stainless-alloy valve construction for broad fuel compatibility and can be used with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. Each set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology, with every injector individually serial numbered and detailed flow matching and latency results supplied on the Data Match Sheet. FIC flow tests and rates these injectors at 43.5 PSI / 3 Bar and 90 degrees F fuel temperature using CF-16B calibration fluid. Factory-style electrical connectors provide drop-in installation with no plug conversion required, and plug-and-play Ford ECU data is available from Fuel Injector Clinic.
Specifications
- Part Number: is408-1440h
- Injector Quantity: 8
- Flow Rate: 1440cc/min
- Flow Rate at 43.5 PSI: 140 lbs/hr
- Fuel Pressure Rating: 43.5 PSI / 3 Bar
- Impedance: High impedance / saturated
- Injector Design: Ball and seat
- Valve Construction: Stainless alloy
- Fitment: Drop-in for the listed factory application
- Electrical Connection: Factory-style connector, no plug conversion required
- Injector Matching: Fuel Injector Clinic Data Match Technology
- Calibration Fluid: CF-16B
- Test Fuel Temperature: 90 degrees F
- Fuel Compatibility: Pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- ECU Data: Plug-and-play Ford ECU data available from Fuel Injector Clinic
- O-Rings: Includes O-rings required for the factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete matched set of eight 1440cc/min performance fuel injectors
- 140 lbs/hr flow rating at 43.5 PSI fuel pressure
- Saturated high-impedance ball and seat injector design
- High-flow fueling capability for modified and high-horsepower Ford Raptor builds
- Excellent idle performance for street-driven applications
- Excellent linearity for predictable fuel delivery
- Superior short pulse width control and repeatability
- Stainless-alloy valve construction for broad fuel compatibility
- Compatible with pump gasoline and E85
- Compatible with Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Precisely matched using Fuel Injector Clinic Data Match Technology
- Each injector is individually serial numbered
- Data Match Sheet provides detailed flow matching and latency information
- Drop-in installation with factory-style electrical connectors
- No injector plug conversion required
- Flow tested and rated at 43.5 PSI / 3 Bar
- Tested at 90 degrees F fuel temperature using CF-16B calibration fluid
- Plug-and-play Ford ECU calibration data available from Fuel Injector Clinic
- Includes O-rings required for the factory application
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
1440cc Fuel Capacity with Street-Friendly Control
Large injectors need to deliver more than maximum fuel volume. They also need to remain controllable when the engine requires only a small portion of their total capacity. Fuel Injector Clinic's 1440cc High-Z injector combines substantial fuel flow with excellent idle performance, linearity, and short pulse width control. That balance makes the is408-1440h a strong option for performance Raptor builds that need serious fueling capability without sacrificing low-speed behavior and drivability.
Data Match Technology for Precise Tuning
Consistent fuel delivery across all eight cylinders is critical as horsepower and injector size increase. Fuel Injector Clinic precisely matches each is408-1440h set using proprietary Data Match Technology. Every injector is individually serial numbered, and detailed flow matching and latency results are supplied on the Data Match Sheet. This provides your tuner with valuable injector-specific information for accurate calibration and consistent cylinder-to-cylinder fueling.
Broad Fuel Compatibility
The stainless-alloy valve construction of the FIC 1440cc injector allows it to operate with a wide range of performance fuels. Fuel Injector Clinic specifies compatibility with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. This versatility makes the is408-1440h suitable for everything from gasoline-fueled street trucks to aggressive E85 and race-fuel combinations.
Drop-In Installation with Factory-Style Connectors
The is408-1440h is designed as a drop-in injector set for the listed 2010-2014 Ford Raptor application and uses factory-style electrical connectors. No injector plug conversion is required, eliminating the need to cut or solder the factory wiring harness or install electrical adapters. Fuel Injector Clinic also includes the O-rings required for the factory application, while available plug-and-play Ford ECU data provides valuable information for proper calibration.
Fitment
- 2010 Ford F-150 Raptor
- 2011 Ford F-150 Raptor
- 2012 Ford F-150 Raptor
- 2013 Ford F-150 Raptor
- 2014 Ford F-150 Raptor
Fitment Note: This injector set is designed for the title-listed 2010-2014 Ford Raptor application. If your truck uses aftermarket fuel rails or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to verify proper injector fitment.
FAQs
Do the FIC is408-1440h injectors require a plug conversion?
No. The is408-1440h uses factory-style electrical connectors for the listed 2010-2014 Ford Raptor application, providing drop-in installation without an injector plug conversion.
What fuels are compatible with FIC is408-1440h 1440cc injectors?
Fuel Injector Clinic specifies compatibility with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. The stainless-alloy valve construction provides broad fuel compatibility for street and race applications.
Why Buy from Beefcake Racing?
Beefcake Racing specializes in Ford performance and the fuel-system components needed to support everything from modified street trucks to serious high-horsepower builds. Selecting the correct injector size and supporting fuel-system components is critical to reliable fuel delivery, accurate tuning, and strong drivability. Our experienced team can help you choose the right combination for your Raptor's engine setup, fuel choice, and performance goals.
Questions about Fuel Injector Clinic part number is408-1440h or your Ford Raptor fuel system? Email Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
