Fuel Injector Clinic 650cc High-Z Injector Set (is408-0650h) - 2010-2014 Ford Raptor
Upgrade your 2010-2014 Ford Raptor with the added fuel capacity and precise control of the Fuel Injector Clinic 650cc High-Z injector set. This matched set of eight injectors flows 650cc/min, or 62 lbs/hr, at 43.5 PSI fuel pressure, giving modified and performance-oriented Raptor builds increased fueling capability while maintaining the accurate injector behavior needed for strong drivability. High-impedance ball and seat construction, excellent linearity, and superior short pulse width repeatability help deliver predictable fuel control from idle and cruising through higher-load operation.
The is408-0650h combines performance with straightforward installation through plug-and-play compatibility with the OEM wiring harness. Each set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology, with every injector individually serial numbered and detailed flow matching and latency results supplied on the Data Match Sheet. FIC flow tests and rates these injectors at 43.5 PSI / 3 Bar and 90 degrees F fuel temperature using CF-16B calibration fluid. Plug-and-play Ford ECU data is available from Fuel Injector Clinic, and the set includes the O-rings required for the factory application.
Specifications
- Part Number: is408-0650h
- Injector Quantity: 8
- Flow Rate: 650cc/min
- Flow Rate at 43.5 PSI: 62 lbs/hr
- Fuel Pressure Rating: 43.5 PSI / 3 Bar
- Impedance: High impedance / saturated
- Injector Design: Ball and seat
- Electrical Connection: Plug-and-play fit to OEM harness
- Injector Matching: Fuel Injector Clinic Data Match Technology
- Calibration Fluid: CF-16B
- Test Fuel Temperature: 90 degrees F
- ECU Data: Plug-and-play Ford ECU data available from Fuel Injector Clinic
- O-Rings: Includes O-rings required for the factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete matched set of eight 650cc/min performance fuel injectors
- 62 lbs/hr flow rating at 43.5 PSI fuel pressure
- Saturated high-impedance ball and seat injector design
- Increased fuel capacity for modified and high-performance Ford Raptor builds
- Excellent linearity for predictable fuel delivery
- Superior short pulse width control and repeatability
- Precisely matched using Fuel Injector Clinic Data Match Technology
- Each injector is individually serial numbered
- Data Match Sheet provides detailed flow matching and latency information
- Plug-and-play connection to the OEM injector harness
- No injector plug conversion required
- Flow tested and rated at 43.5 PSI / 3 Bar
- Tested at 90 degrees F fuel temperature using CF-16B calibration fluid
- Plug-and-play Ford ECU calibration data available from Fuel Injector Clinic
- Includes O-rings required for the factory application
- Designed for excellent tunability and drivability
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
650cc Fuel Capacity for Performance Raptor Builds
As airflow and horsepower increase, the fuel system must be able to keep pace with the engine's additional demand. The FIC is408-0650h provides 650cc/min of flow per injector, giving modified 2010-2014 Raptors additional fuel capacity while retaining the precise injector control required for a properly calibrated performance combination. It is an excellent step up for builds that need more fuel delivery without making street manners and low-speed control an afterthought.
Data Match Technology for Precise Tuning
Consistent injector performance across all eight cylinders is essential to accurate calibration. Fuel Injector Clinic precisely matches each is408-0650h set using proprietary Data Match Technology. Every injector is individually serial numbered, and detailed flow matching and latency results are supplied on the Data Match Sheet. This gives your tuner accurate injector-specific information to help achieve consistent cylinder-to-cylinder fueling and precise calibration throughout the operating range.
High Flow with Excellent Short Pulse Width Control
A performance injector needs to do more than supply additional fuel under heavy load. It must also accurately meter much smaller quantities of fuel during idle, cruising, and throttle transitions. Fuel Injector Clinic combines 650cc/min capacity with excellent linearity and superior short pulse width control, helping the ECU accurately manage fuel delivery across a wide range of operating conditions for strong tunability and drivability.
Plug-and-Play OEM Harness Installation
The is408-0650h is designed to connect directly to the OEM injector wiring harness on the listed Ford Raptor application. No injector plug conversion is required, eliminating the need for solder-in pigtails or electrical adapters and keeping installation clean and straightforward. Fuel Injector Clinic also includes the O-rings required for the factory application, while available plug-and-play Ford ECU data helps provide your tuner with the information needed for calibration.
Fitment
- 2010 Ford F-150 Raptor
- 2011 Ford F-150 Raptor
- 2012 Ford F-150 Raptor
- 2013 Ford F-150 Raptor
- 2014 Ford F-150 Raptor
Fitment Note: This injector set is designed for the title-listed 2010-2014 Ford Raptor application. If your truck uses aftermarket fuel rails or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to verify proper injector fitment.
FAQs
Does the Fuel Injector Clinic is408-0650h require an injector plug conversion?
No. The is408-0650h provides plug-and-play compatibility with the OEM injector wiring harness for the listed 2010-2014 Ford Raptor application, so no injector plug conversion is required.
How are the FIC is408-0650h 650cc injectors matched and tested?
Fuel Injector Clinic precisely matches each set using proprietary Data Match Technology. Every injector is individually serial numbered, with detailed flow matching and latency results supplied on the Data Match Sheet. The injectors are flow tested and rated at 43.5 PSI / 3 Bar and 90 degrees F fuel temperature using CF-16B calibration fluid.
Why Buy from Beefcake Racing?
Beefcake Racing specializes in Ford performance and high-performance fuel-system upgrades for everything from street-driven trucks to serious high-horsepower builds. Choosing the correct injector size and supporting fuel-system components is critical to reliable fuel delivery, accurate tuning, and strong drivability. Our experienced team can help you select the right components for your Raptor's engine combination and performance goals.
Questions about Fuel Injector Clinic part number is408-0650h or your Ford Raptor fuel system? Email Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
