Fuel Injector Clinic 525cc High-Z Injector Set (is408-0525h) - 2010-2014 Ford Raptor
Upgrade the fuel delivery in your 2010-2014 Ford Raptor with the Fuel Injector Clinic 525cc High-Z injector set. This matched set of eight injectors flows 525cc/min, or 50 lbs/hr, at 43.5 PSI fuel pressure, providing increased fueling capability for performance-oriented Raptor builds while maintaining the precise low-speed control needed for excellent drivability. High-impedance ball and seat construction, strong linearity, and excellent short pulse width repeatability give your tuner predictable injector behavior across the operating range.
The is408-0525h is engineered for straightforward installation with plug-and-play compatibility to the OEM wiring harness. Fuel Injector Clinic precisely flow matches each set to within 1%, individually numbers every injector, and supplies the individual results on the included detailed flow sheet. Each injector is flow tested and rated at 43.5 PSI / 3 Bar and 90 degrees F fuel temperature using CF-16B calibration fluid. Plug-and-play Ford ECU data is available from Fuel Injector Clinic, and the set includes the O-rings required for the factory application.
Specifications
- Part Number: is408-0525h
- Injector Quantity: 8
- Flow Rate: 525cc/min
- Flow Rate at 43.5 PSI: 50 lbs/hr
- Fuel Pressure Rating: 43.5 PSI / 3 Bar
- Impedance: High impedance / saturated
- Injector Design: Ball and seat
- Electrical Connection: Plug-and-play fit to OEM harness
- Flow Matching: Precisely flow matched to within 1%
- Calibration Fluid: CF-16B
- Test Fuel Temperature: 90 degrees F
- ECU Data: Plug-and-play Ford ECU data available from Fuel Injector Clinic
- O-Rings: Includes O-rings required for the factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete matched set of eight 525cc/min performance fuel injectors
- 50 lbs/hr flow rating at 43.5 PSI fuel pressure
- Saturated high-impedance injector electronics
- Ball and seat injector construction
- Excellent linearity for predictable fuel delivery
- Superior short pulse width control and repeatability
- Precisely flow matched to within 1%
- Each injector is individually numbered
- Detailed injector flow results included with the set
- Plug-and-play connection to the OEM injector harness
- No injector plug conversion required
- Flow tested at 43.5 PSI / 3 Bar
- Tested at 90 degrees F fuel temperature using CF-16B calibration fluid
- Plug-and-play Ford ECU calibration data available from Fuel Injector Clinic
- Includes O-rings required for the factory application
- Designed for strong tunability and drivability
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
Performance Fueling with Street-Friendly Control
Increasing injector capacity should not mean giving up the smooth behavior you expect from a street-driven Raptor. Fuel Injector Clinic combines 525cc/min flow with excellent linearity and tight manufacturing tolerances, allowing the injectors to accurately meter smaller quantities of fuel during idle, cruising, and part-throttle operation while providing increased fuel delivery as engine demand rises. The result is a performance injector set engineered around both fuel capacity and drivability.
Precisely Flow Matched to Within 1%
Consistent fueling across all eight cylinders is critical to a properly calibrated performance engine. Fuel Injector Clinic precisely flow matches the injectors in each is408-0525h set to within 1%. Every injector is individually numbered, and its results are documented on the detailed flow sheet supplied with the set. This gives your tuner useful injector-specific information while helping maintain consistent cylinder-to-cylinder fuel delivery.
Built for Accurate Tuning
Fuel Injector Clinic flow tests and rates these injectors at 43.5 PSI / 3 Bar and 90 degrees F fuel temperature using CF-16B calibration fluid. Combined with superior short pulse width control and tight manufacturing tolerances, this controlled testing helps provide predictable injector performance that makes accurate calibration easier. Plug-and-play Ford ECU data is also available directly from Fuel Injector Clinic to further support the tuning process.
Plug-and-Play OEM Harness Installation
The is408-0525h is designed to connect directly to the OEM injector wiring harness on the listed Ford Raptor application. No injector plug conversion is required, eliminating the need for solder-in pigtails or electrical adapters and keeping installation clean and straightforward. Fuel Injector Clinic also includes the O-rings required to fit the factory application.
Fitment
- 2010 Ford F-150 Raptor
- 2011 Ford F-150 Raptor
- 2012 Ford F-150 Raptor
- 2013 Ford F-150 Raptor
- 2014 Ford F-150 Raptor
Fitment Note: This injector set is designed for the title-listed 2010-2014 Ford Raptor application. If your truck uses aftermarket fuel rails or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to verify proper injector fitment.
FAQs
Does the Fuel Injector Clinic is408-0525h require an injector plug conversion?
No. The is408-0525h is designed for plug-and-play compatibility with the OEM injector wiring harness on the listed 2010-2014 Ford Raptor application, so no injector plug conversion is required.
How are the FIC is408-0525h 525cc injectors matched and tested?
Fuel Injector Clinic precisely flow matches each injector set to within 1%, individually numbers each injector, and supplies the individual results on a detailed flow sheet. The injectors are flow tested and rated at 43.5 PSI / 3 Bar and 90 degrees F fuel temperature using CF-16B calibration fluid.
Why Buy from Beefcake Racing?
Beefcake Racing specializes in Ford performance and high-performance fuel-system upgrades for everything from street-driven trucks to serious performance builds. Choosing the right injector size and supporting fuel-system components is critical to achieving reliable fuel delivery, accurate tuning, and strong drivability. Our experienced team can help you select the right components for your Raptor's engine setup and performance goals.
Questions about Fuel Injector Clinic part number is408-0525h or your Ford Raptor fuel system? Email Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
