Fuel Injector Clinic 445cc High-Z Injector Set (is408-0445h) - 2010-2014 Ford Raptor
Upgrade your 2010-2014 Ford Raptor with the precision and increased fuel delivery of the Fuel Injector Clinic 445cc High-Z injector set. This matched set of eight injectors flows 445cc/min, or 42 lbs/hr, at 43.5 PSI fuel pressure, providing performance-oriented Raptor builds with dependable fuel delivery and the precise injector control needed for excellent drivability. Advanced injector technology, great linearity, and superior short pulse width repeatability help deliver predictable fueling from idle and part throttle through higher-load operation.
The is408-0445h combines performance with straightforward installation thanks to plug-and-play compatibility with the OEM wiring harness. Fuel Injector Clinic precisely flow matches each set to within 1%, individually numbers every injector, and supplies the individual results on a detailed flow sheet. Each injector is flow tested and rated at 43.5 PSI / 3 Bar and 90 degrees F fuel temperature using CF-16B calibration fluid. Plug-and-play Ford ECU data is also available from Fuel Injector Clinic, and the set includes the O-rings required for the factory application.
Specifications
- Part Number: is408-0445h
- Injector Quantity: 8
- Flow Rate: 445cc/min
- Flow Rate at 43.5 PSI: 42 lbs/hr
- Fuel Pressure Rating: 43.5 PSI / 3 Bar
- Impedance: High impedance / saturated
- Electrical Connection: Plug-and-play fit to OEM harness
- Flow Matching: Precisely flow matched to within 1%
- Calibration Fluid: CF-16B
- Test Fuel Temperature: 90 degrees F
- ECU Data: Plug-and-play Ford ECU data available from Fuel Injector Clinic
- O-Rings: Includes O-rings required for the factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete matched set of eight 445cc/min performance fuel injectors
- 42 lbs/hr flow rating at 43.5 PSI fuel pressure
- Saturated high-impedance injector electronics
- Excellent linearity for predictable fuel delivery
- Superior short pulse width control and repeatability
- Precisely flow matched to within 1%
- Each injector is individually numbered
- Detailed injector flow results included with the set
- Plug-and-play connection to the OEM injector harness
- No injector plug conversion required
- Flow tested and rated at 43.5 PSI / 3 Bar
- Tested at 90 degrees F fuel temperature using CF-16B calibration fluid
- Plug-and-play Ford ECU calibration data available from Fuel Injector Clinic
- Includes O-rings required for the factory application
- Designed for excellent tunability and drivability
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
Performance Fuel Delivery with Precise Control
Injector performance is about more than maximum flow. Accurate fuel metering during idle, cruising, and throttle transitions is just as important to a well-tuned Raptor. The FIC 445cc injector combines increased fuel delivery capability with excellent linearity and short pulse width repeatability, helping the ECU accurately control fueling across a broad operating range. That balance makes the is408-0445h a strong choice for Raptor owners who want additional fueling capability while maintaining street-friendly behavior.
Precisely Flow Matched to Within 1%
Consistent fuel delivery across all eight cylinders is critical to a properly calibrated performance engine. Fuel Injector Clinic precisely flow matches the injectors within each is408-0445h set to within 1%. Every injector is individually numbered, and its results are documented on the detailed flow sheet supplied with the set. This provides useful injector-specific information while helping maintain consistent cylinder-to-cylinder fuel delivery.
Built for Tunability and Drivability
Fuel Injector Clinic flow tests and rates these injectors at 43.5 PSI / 3 Bar and 90 degrees F fuel temperature using CF-16B calibration fluid. Combined with tight manufacturing tolerances and superior short pulse width control, this controlled testing helps deliver predictable injector performance that makes accurate tuning easier. Plug-and-play Ford ECU data is also available directly from Fuel Injector Clinic to further support calibration.
Plug-and-Play OEM Harness Installation
The is408-0445h is designed to connect directly to the OEM injector wiring harness on the listed Ford Raptor application. No injector plug conversion is required, eliminating the need for solder-in pigtails or electrical adapters and keeping installation clean and straightforward. Fuel Injector Clinic also includes the O-rings required to fit the factory application.
Fitment
- 2010 Ford F-150 Raptor
- 2011 Ford F-150 Raptor
- 2012 Ford F-150 Raptor
- 2013 Ford F-150 Raptor
- 2014 Ford F-150 Raptor
Fitment Note: This injector set is designed for the title-listed 2010-2014 Ford Raptor application. If your truck uses aftermarket fuel rails or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to verify proper injector fitment.
FAQs
Does the Fuel Injector Clinic is408-0445h require an injector plug conversion?
No. The is408-0445h is designed for plug-and-play compatibility with the OEM injector wiring harness on the listed 2010-2014 Ford Raptor application, so no injector plug conversion is required.
How are the FIC is408-0445h 445cc injectors matched and tested?
Fuel Injector Clinic precisely flow matches each injector set to within 1%, individually numbers each injector, and supplies the individual results on a detailed flow sheet. The injectors are flow tested and rated at 43.5 PSI / 3 Bar and 90 degrees F fuel temperature using CF-16B calibration fluid.
Why Buy from Beefcake Racing?
Beefcake Racing specializes in Ford performance and high-performance fuel-system upgrades for everything from street-driven trucks to serious performance builds. Choosing the right injector size and supporting fuel-system components is critical to achieving reliable fuel delivery, accurate tuning, and strong drivability. Our experienced team can help you select the right components for your Raptor's engine setup and performance goals.
Questions about Fuel Injector Clinic part number is408-0445h or your Ford Raptor fuel system? Email Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
