Fuel Injector Clinic 775cc High-Z Injector Set (is406-0775h) - 1985-2003 Ford F-150 / 1993-1995 Lightning
Step up the fuel system on your 1985-2003 Ford F-150 or 1993-1995 Ford Lightning with the Fuel Injector Clinic 775cc High-Z injector set. This matched set of eight injectors flows 775cc/min, or 74 lbs/hr, at 43.5 PSI fuel pressure, delivering the additional fuel capacity demanded by modified and high-horsepower Ford truck combinations. Excellent linearity and short pulse width repeatability help maintain accurate fuel control from idle and part throttle through higher-load operation, giving your tuner a predictable injector with the capacity to support increased performance.
Every is406-0775h set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered, with detailed flow matching and latency information provided on the included Data Match Sheet. FIC flow tests and rates these injectors at 43.5 PSI / 3 Bar and 90 degrees F fuel temperature using CF-16B calibration fluid. PGTUSC8 solder-in pigtails are included for the required injector plug conversion, while optional PADPUtoJ8 plug-and-play adapters allow installation without cutting or soldering the factory harness. Plug-and-play Ford ECU data is also available from Fuel Injector Clinic to support accurate tuning.
Specifications
- Part Number: is406-0775h
- Injector Quantity: 8
- Flow Rate: 775cc/min
- Flow Rate at 43.5 PSI: 74 lbs/hr
- Fuel Pressure Rating: 43.5 PSI / 3 Bar
- Impedance: High impedance / saturated
- Injector Design: Ball and seat
- Included Connector Solution: PGTUSC8 solder-in pigtails
- Optional Connector Solution: PADPUtoJ8 plug-and-play adapters
- Injector Matching: Fuel Injector Clinic Data Match Technology
- Calibration Fluid: CF-16B
- Test Fuel Temperature: 90 degrees F
- ECU Data: Plug-and-play Ford ECU data available from Fuel Injector Clinic
- O-Rings: Includes O-rings required for the applicable factory configuration
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Eight 775cc/min High-Z performance fuel injectors
- 74 lbs/hr flow rating at 43.5 PSI fuel pressure
- High-impedance saturated ball and seat injector design
- Substantial fuel capacity for modified and high-horsepower Ford truck applications
- Excellent linearity throughout the injector operating range
- Superior short pulse width control and repeatability
- Precisely matched using Fuel Injector Clinic Data Match Technology
- Each injector is individually serial numbered
- Detailed Data Match Sheet provides flow matching and latency information
- Flow tested and rated at 43.5 PSI / 3 Bar
- Tested at 90 degrees F fuel temperature using CF-16B calibration fluid
- Includes PGTUSC8 solder-in pigtails for injector plug conversion
- Optional PADPUtoJ8 plug-and-play adapters eliminate cutting or soldering the factory harness
- Plug-and-play Ford ECU calibration data available from Fuel Injector Clinic
- Includes O-rings required for the applicable factory configuration
- Uses brand-new injectors rather than remanufactured or core-program injectors
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
775cc Fuel Capacity for High-Performance Ford Trucks
Modified F-150 and first-generation Lightning combinations can quickly demand more fuel as airflow, boost, and horsepower increase. The FIC 775cc injector provides substantially increased fuel capacity while retaining the accurate low-pulse-width behavior needed for proper calibration. With 775cc/min of flow available, the is406-0775h gives performance-oriented Ford truck builds additional fueling capability without making precise injector control an afterthought.
Data Match Technology for Precise Tuning
Consistent injector performance across all eight cylinders is critical when tuning a high-performance engine. Fuel Injector Clinic precisely matches each is406-0775h set using proprietary Data Match Technology. Every injector is individually serial numbered, and detailed flow matching and latency results are supplied on the Data Match Sheet. This provides your tuner with accurate injector information for consistent cylinder-to-cylinder fueling and precise calibration throughout the operating range.
High Flow with Street-Friendly Control
A performance injector needs to accurately meter small quantities of fuel during idle and cruising while supplying significantly more fuel as engine load increases. Fuel Injector Clinic combines 775cc/min of flow with excellent linearity and superior short pulse width control, helping the ECU accurately manage fuel delivery across a wide operating range. This balance between capacity and control makes the is406-0775h well suited to powerful Ford truck combinations that still need dependable street drivability.
Connector Options for a Clean Installation
The is406-0775h requires an injector connector conversion for the listed applications. Fuel Injector Clinic includes PGTUSC8 solder-in pigtails, allowing the original injector connectors on the wiring harness to be replaced. Optional PADPUtoJ8 plug-and-play adapters provide an alternative for owners who prefer installation without cutting or soldering the factory wiring harness.
Fuel Injector Clinic uses brand-new, unused injectors for its performance applications rather than relying on remanufactured or core-program injectors. This approach avoids introducing the additional uncertainty associated with previously used injector components into a performance fuel system.
Fitment
- 1985 Ford F-150
- 1986 Ford F-150
- 1987 Ford F-150
- 1988 Ford F-150
- 1989 Ford F-150
- 1990 Ford F-150
- 1991 Ford F-150
- 1992 Ford F-150
- 1993 Ford F-150
- 1994 Ford F-150
- 1995 Ford F-150
- 1996 Ford F-150
- 1997 Ford F-150
- 1998 Ford F-150
- 1999 Ford F-150
- 2000 Ford F-150
- 2001 Ford F-150
- 2002 Ford F-150
- 2003 Ford F-150
- 1993 Ford F-150 Lightning
- 1994 Ford F-150 Lightning
- 1995 Ford F-150 Lightning
Fitment Note: This listing is intended for the title-listed 1985-2003 Ford F-150 and 1993-1995 Ford Lightning applications. If your truck uses aftermarket fuel rails or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to verify proper injector fitment.
FAQs
Does the Fuel Injector Clinic is406-0775h require an injector plug conversion?
Yes. The set includes PGTUSC8 solder-in pigtails for converting the factory wiring harness to the injector connectors. Optional PADPUtoJ8 plug-and-play adapters are available if you prefer installation without cutting or soldering the factory harness.
How are the FIC is406-0775h 775cc injectors matched?
Fuel Injector Clinic precisely matches the set using its proprietary Data Match Technology. Each injector is individually serial numbered, with detailed flow matching and latency results supplied on the Data Match Sheet to provide accurate injector information for tuning.
Why Buy from Beefcake Racing?
Beefcake Racing specializes in Ford performance and high-performance fuel-system upgrades for everything from classic F-150 builds to first-generation Ford Lightning combinations. Our experienced team can help you select injectors and supporting fuel-system components that match your engine setup, power goals, and tuning requirements.
Questions about Fuel Injector Clinic part number is406-0775h or your Ford truck fuel system? Email Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
