Fuel Injector Clinic 445cc Injector Set (is406-0445h) - 1985-2003 Ford F-150 / 1993-1995 Lightning
Upgrade your 1985-2003 Ford F-150 or 1993-1995 Ford Lightning with the precision and consistency of the Fuel Injector Clinic 445cc injector set. This matched set of eight high-impedance injectors flows 445cc/min, or 42 lbs/hr, at 43.5 PSI fuel pressure, providing increased fuel delivery for modified Ford truck combinations while maintaining the accurate control needed for strong drivability. Excellent linearity, short pulse width repeatability, and tight manufacturing tolerances help deliver predictable fueling from idle and cruising through higher-load operation.
Fuel Injector Clinic precisely flow matches each high-performance injector set to within 1%. Every injector is individually numbered, with its results documented on the detailed flow sheet included with the set. The is406-0445h is flow tested and rated at 43.5 PSI / 3 Bar and 90 degrees F fuel temperature using CF-16B calibration fluid. PGTUSC8 solder-in pigtails are included for the required injector plug conversion, while optional PADPUtoJ8 plug-and-play adapters provide an installation option without cutting or soldering the factory harness. Plug-and-play Ford ECU data is also available from Fuel Injector Clinic.
Specifications
- Part Number: is406-0445h
- Injector Quantity: 8
- Flow Rate: 445cc/min
- Flow Rate at 43.5 PSI: 42 lbs/hr
- Fuel Pressure Rating: 43.5 PSI / 3 Bar
- Impedance: High impedance / saturated
- Included Connector Solution: PGTUSC8 solder-in pigtails
- Optional Connector Solution: PADPUtoJ8 plug-and-play adapters
- Flow Matching: Precisely flow matched to within 1%
- Calibration Fluid: CF-16B
- Test Fuel Temperature: 90 degrees F
- ECU Data: Plug-and-play Ford ECU data available from Fuel Injector Clinic
- O-Rings: Includes O-rings required for the applicable factory configuration
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Eight 445cc/min high-impedance performance fuel injectors
- 42 lbs/hr flow rating at 43.5 PSI fuel pressure
- Increased fuel capacity for modified Ford truck applications
- Excellent linearity for predictable fuel delivery
- Superior short pulse width control and repeatability
- Tight manufacturing tolerances for consistent performance
- Precisely flow matched to within 1%
- Each injector is individually numbered
- Detailed flow sheet documents individual injector results
- Flow tested and rated at 43.5 PSI / 3 Bar
- Tested at 90 degrees F fuel temperature using CF-16B calibration fluid
- Includes PGTUSC8 solder-in pigtails for injector plug conversion
- Optional PADPUtoJ8 plug-and-play adapters eliminate cutting or soldering the factory harness
- Plug-and-play Ford ECU calibration data available from Fuel Injector Clinic
- Includes O-rings required for the applicable factory configuration
- Uses brand-new injectors rather than remanufactured or core-program injectors
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
Modern 445cc Fueling for Classic Ford Trucks
Performance upgrades can quickly increase the fuel demands of an older F-150 or first-generation Lightning. The FIC 445cc injector brings modern high-impedance injector performance to these applications, providing additional fuel capacity while maintaining the precise low-speed control needed for proper calibration. For modified street trucks, the combination of increased flow, excellent linearity, and short pulse width repeatability helps provide the balance between performance and drivability that matters in the real world.
Precisely Flow Matched to Within 1%
Consistent fuel delivery across all eight cylinders is critical to a properly tuned performance engine. Fuel Injector Clinic precisely flow matches each is406-0445h injector set to within 1%, helping minimize injector-to-injector variation. Every injector is individually numbered, and its individual results are documented on the detailed flow sheet included with the set. This provides useful injector-specific information for consistent cylinder-to-cylinder fueling and accurate tuning.
Built for Tunability and Drivability
Fuel Injector Clinic combines increased fuel capacity with superior short pulse width control and tight manufacturing tolerances. These characteristics help the ECU accurately meter fuel during idle, cruising, and part-throttle operation while providing additional capacity as engine load increases. The result is a performance injector designed to make accurate tuning and strong street drivability priorities rather than afterthoughts.
Connector Options for a Clean Installation
The is406-0445h requires an injector connector conversion for the listed applications. Fuel Injector Clinic includes PGTUSC8 solder-in pigtails, allowing the original injector connectors on the wiring harness to be replaced. Optional PADPUtoJ8 plug-and-play adapters provide an alternative for owners who prefer installation without cutting or soldering the factory wiring harness.
Fuel Injector Clinic uses brand-new, unused injectors for its performance applications rather than relying on remanufactured or core-program injectors. This approach avoids introducing the additional uncertainty associated with previously used injector components into a performance fuel system.
Fitment
- 1985 Ford F-150
- 1986 Ford F-150
- 1987 Ford F-150
- 1988 Ford F-150
- 1989 Ford F-150
- 1990 Ford F-150
- 1991 Ford F-150
- 1992 Ford F-150
- 1993 Ford F-150
- 1994 Ford F-150
- 1995 Ford F-150
- 1996 Ford F-150
- 1997 Ford F-150
- 1998 Ford F-150
- 1999 Ford F-150
- 2000 Ford F-150
- 2001 Ford F-150
- 2002 Ford F-150
- 2003 Ford F-150
- 1993 Ford F-150 Lightning
- 1994 Ford F-150 Lightning
- 1995 Ford F-150 Lightning
Fitment Note: This listing is intended for the title-listed 1985-2003 Ford F-150 and 1993-1995 Ford Lightning applications. If your truck uses aftermarket fuel rails or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to verify proper injector fitment.
FAQs
Does the Fuel Injector Clinic is406-0445h require an injector plug conversion?
Yes. The set includes PGTUSC8 solder-in pigtails for converting the factory wiring harness to the injector connectors. Optional PADPUtoJ8 plug-and-play adapters are available if you prefer installation without cutting or soldering the factory harness.
How closely matched are the FIC is406-0445h 445cc injectors?
Fuel Injector Clinic precisely flow matches its high-performance injector sets to within 1%. Each injector is individually numbered, and its results are documented on the detailed flow sheet included with the set.
Why Buy from Beefcake Racing?
Beefcake Racing specializes in Ford performance and high-performance fuel-system upgrades for everything from classic F-150 builds to first-generation Ford Lightning combinations. Our experienced team can help you select injectors and supporting fuel-system components that match your engine setup, power goals, and tuning requirements.
Questions about Fuel Injector Clinic part number is406-0445h or your Ford truck fuel system? Email Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
