Fuel Injector Clinic 2150cc Fuel Injector Set - High Z (2015 - 2024 Volkswagen Golf MK7 / MK8) IS360-2150H
Build the supplemental fuel system your high-powered Volkswagen Golf deserves with the Fuel Injector Clinic 2150cc High-Z Fuel Injector Set. Designed for 2015-2024 Golf MK7 and MK8 applications using an aftermarket intake manifold or port injection kit, the IS360-2150H includes four massive 2150cc high impedance ball and seat injectors. FIC combines exceptional flow capacity with advanced short pulse width control and precise dynamic matching, giving properly calibrated high-performance builds the fuel delivery they need without sacrificing control during idle and part-throttle operation.
Because controlling an injector this large at very short pulse widths demands exceptional consistency, Fuel Injector Clinic uses its proprietary Data Match Technology to dynamically match each IS360-2150H set. Every injector is individually serial numbered, and the included Data Match Sheet provides detailed flow matching and latency information for calibration. FIC flow tests and rates these injectors at 43.5 PSI (3 Bar) with fuel at 90 degrees F using calibration fluid. The set includes PGTDEN4 pigtails, with optional PADPDtoJ4 plug-and-play adapters available, along with the O-rings required for the listed application.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: IS360-2150H
- Flow Rate: 2150cc/min
- Quantity: Set of 4 injectors
- Impedance: High-Z / High Impedance
- Injector Type: Ball and seat
- Application: Aftermarket intake manifold or port injection kit
- Injector Matching: Fuel Injector Clinic Data Match Technology dynamic flow matching
- Injector Identification: Individually serial numbered
- Injector Data: Data Match Sheet included
- Flow Test Pressure: 43.5 PSI (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Included Wiring: PGTDEN4 solder-in pigtails
- Optional Wiring Adapters: PADPDtoJ4 plug-and-play adapters
- MTBE Fuel Compatibility: Not compatible with VP Import, Q16, or other MTBE oxygenated fuels
- O-Rings: Includes O-rings required for the listed application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Four 2150cc high impedance ball and seat fuel injectors
- Designed for Volkswagen Golf MK7 and MK8 applications using an aftermarket intake manifold or port injection kit
- Massive fuel-flow capability for demanding high-performance supplemental fueling systems
- Excellent linearity and short pulse width repeatability
- Dynamic flow matching improves ECU control at very short injector pulse widths
- Enhanced control in the sub-2ms pulse width range commonly encountered during idle and part-throttle operation
- Superior short pulse width control supports accurate calibration and strong drivability
- Precisely matched using Fuel Injector Clinic's proprietary Data Match Technology
- Each injector is individually serial numbered
- Includes a detailed Data Match Sheet with flow matching and latency value information
- Flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using calibration fluid
- Includes PGTDEN4 pigtails for wiring installation
- Optional PADPDtoJ4 plug-and-play adapters provide an alternative to cutting and soldering wiring
- Includes the O-rings required for the listed application
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
Important Fuel Compatibility and Care Information
Do not use IS360-2150H injectors with VP Import, Q16, or other MTBE oxygenated fuels. Fuel Injector Clinic states that the internal construction of its 2150cc injector contains a seal that can swell when exposed to MTBE. This swelling can significantly reduce injector flow, making the injector unsuitable for MTBE oxygenated fuels. FIC also advises following its injector care instructions because prolonged disuse while exposed to alcohol-based fuels such as E85 may create potential corrosion issues.
Installation
The IS360-2150H set is intended for Volkswagen Golf MK7 and MK8 applications equipped with an aftermarket intake manifold or port injection kit. This is not a replacement set for the factory direct injectors. The set includes PGTDEN4 pigtails for wiring installation. Optional PADPDtoJ4 plug-and-play adapters can be selected when an appropriate adapter connection is preferred.
Fuel Injector Clinic supplies the injectors with the O-rings required for the listed application. Because these injectors are intended for aftermarket intake manifold or port injection configurations, compatibility with the specific hardware being used should be verified before ordering.
Fitment
- 2015 Volkswagen Golf MK7 / MK8 applications with compatible aftermarket intake manifold or port injection kit
- 2016 Volkswagen Golf MK7 / MK8 applications with compatible aftermarket intake manifold or port injection kit
- 2017 Volkswagen Golf MK7 / MK8 applications with compatible aftermarket intake manifold or port injection kit
- 2018 Volkswagen Golf MK7 / MK8 applications with compatible aftermarket intake manifold or port injection kit
- 2019 Volkswagen Golf MK7 / MK8 applications with compatible aftermarket intake manifold or port injection kit
- 2020 Volkswagen Golf MK7 / MK8 applications with compatible aftermarket intake manifold or port injection kit
- 2021 Volkswagen Golf MK7 / MK8 applications with compatible aftermarket intake manifold or port injection kit
- 2022 Volkswagen Golf MK7 / MK8 applications with compatible aftermarket intake manifold or port injection kit
- 2023 Volkswagen Golf MK7 / MK8 applications with compatible aftermarket intake manifold or port injection kit
- 2024 Volkswagen Golf MK7 / MK8 applications with compatible aftermarket intake manifold or port injection kit
FAQs
Are FIC IS360-2150H injectors replacements for the factory Golf MK7 or MK8 direct injectors?
No. The IS360-2150H set is designed for Volkswagen Golf MK7 and MK8 applications using a compatible aftermarket intake manifold or port injection kit. These injectors are intended for that supplemental port injection configuration rather than as replacements for the factory direct injectors.
Can Fuel Injector Clinic IS360-2150H injectors be used with Q16 or VP Import?
No. Fuel Injector Clinic specifically warns against using its 2150cc injectors with Q16, VP Import, or other MTBE oxygenated fuels. MTBE can cause an internal injector seal to swell, significantly reducing injector flow. FIC also recommends following its care instructions when using alcohol-based fuels such as E85, particularly when the vehicle will sit unused for extended periods.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
A high-output Golf MK7 or MK8 port injection setup needs more than simply large injectors. The injectors, port injection hardware, wiring, fuel supply, and calibration all need to work together as a complete system. Beefcake Racing can help you select the Fuel Injector Clinic injectors and supporting performance components that fit your build. Have questions about IS360-2150H, port injection compatibility, wiring adapters, or fuel requirements? Email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
