Fuel Injector Clinic 1650cc Fuel Injector Set - High Z (2015 - 2024 Volkswagen Golf MK7 / MK8) IS360-1650H
Give your high-performance 2015-2024 Volkswagen Golf MK7 or MK8 port injection setup the fuel capacity it needs with the Fuel Injector Clinic 1650cc High-Z Fuel Injector Set. Designed for applications using a compatible aftermarket intake manifold or port injection kit, the IS360-1650H includes four 1650cc high impedance ball and seat injectors that combine serious flow capability with excellent linearity, short pulse width repeatability, and street-friendly control. Better yet, this application provides a plug-and-play fit to the OEM harness, simplifying the electrical side of the installation while delivering the injector performance required for demanding gasoline, E85, and race-fuel combinations.
Fuel Injector Clinic's 1650cc high impedance injector is its largest high impedance injector compatible with all race fuels. Stainless alloy valve construction provides broad fuel compatibility, including pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. Every IS360-1650H set is precisely matched using FIC's proprietary Data Match Technology. Each injector is individually serial numbered, and the included Data Match Sheet provides detailed flow matching and latency information for accurate calibration. FIC flow tests and rates these injectors at 43.5 PSI (3 Bar) with fuel at 90 degrees F using calibration fluid.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: IS360-1650H
- Flow Rate: 1650cc/min
- Quantity: Set of 4 injectors
- Impedance: High-Z / High Impedance
- Injector Type: Ball and seat
- Application: Aftermarket intake manifold or port injection kit
- Valve Construction: Stainless alloy
- Fuel Compatibility: Pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Injector Matching: Fuel Injector Clinic Data Match Technology
- Injector Identification: Individually serial numbered
- Injector Data: Data Match Sheet included
- Flow Test Pressure: 43.5 PSI (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Wiring: Plug-and-play fit to OEM harness
- O-Rings: Includes O-rings required for the listed application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Four 1650cc high impedance ball and seat fuel injectors
- Designed for Volkswagen Golf MK7 and MK8 applications using a compatible aftermarket intake manifold or port injection kit
- High fuel-flow capacity for demanding high-performance port injection systems
- Excellent linearity and short pulse width repeatability for consistent fuel delivery
- Excellent idle performance in properly calibrated street-driven applications
- Superior short pulse width control supports accurate tuning and strong drivability
- Plug-and-play fit to the OEM harness
- Stainless alloy valve construction provides broad fuel compatibility
- Compatible with pump gasoline and E85
- Compatible with Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Precisely matched using Fuel Injector Clinic's proprietary Data Match Technology
- Each injector is individually serial numbered for identification and matching
- Includes a detailed Data Match Sheet with flow matching and latency value information
- Flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using calibration fluid
- Includes the O-rings required for the listed application
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
Port Injection and Plug-and-Play Installation
The IS360-1650H is designed for Volkswagen Golf MK7 and MK8 applications equipped with a compatible aftermarket intake manifold or port injection kit. These injectors are intended for the port injection system and are not replacements for the vehicle's factory direct injectors. For the listed application, FIC specifies a plug-and-play fit to the OEM harness, eliminating the injector plug conversion required with some other injector sizes.
Fuel Injector Clinic supplies the injectors with the O-rings required for the listed application. Because the IS360-1650H is designed for aftermarket intake manifold or port injection configurations, compatibility with the specific port injection hardware being used should be verified before ordering.
Fitment
- 2015 Volkswagen Golf MK7 / MK8 applications with compatible aftermarket intake manifold or port injection kit
- 2016 Volkswagen Golf MK7 / MK8 applications with compatible aftermarket intake manifold or port injection kit
- 2017 Volkswagen Golf MK7 / MK8 applications with compatible aftermarket intake manifold or port injection kit
- 2018 Volkswagen Golf MK7 / MK8 applications with compatible aftermarket intake manifold or port injection kit
- 2019 Volkswagen Golf MK7 / MK8 applications with compatible aftermarket intake manifold or port injection kit
- 2020 Volkswagen Golf MK7 / MK8 applications with compatible aftermarket intake manifold or port injection kit
- 2021 Volkswagen Golf MK7 / MK8 applications with compatible aftermarket intake manifold or port injection kit
- 2022 Volkswagen Golf MK7 / MK8 applications with compatible aftermarket intake manifold or port injection kit
- 2023 Volkswagen Golf MK7 / MK8 applications with compatible aftermarket intake manifold or port injection kit
- 2024 Volkswagen Golf MK7 / MK8 applications with compatible aftermarket intake manifold or port injection kit
FAQs
Are FIC IS360-1650H injectors replacements for the factory Golf MK7 or MK8 direct injectors?
No. The IS360-1650H set is designed for Volkswagen Golf MK7 and MK8 applications equipped with a compatible aftermarket intake manifold or port injection kit. These injectors are intended for the port injection system rather than as replacements for the vehicle's factory direct injectors.
What fuels are compatible with Fuel Injector Clinic IS360-1650H injectors?
Fuel Injector Clinic's 1650cc high impedance injector uses stainless alloy valve construction and is compatible with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. This broad fuel compatibility makes the IS360-1650H a versatile choice for properly configured street and high-performance Golf MK7 and MK8 port injection systems.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
A serious Golf MK7 or MK8 port injection setup needs injectors, fuel delivery hardware, wiring, and calibration that work together as a complete system. Beefcake Racing can help you select the Fuel Injector Clinic injectors and supporting performance components that fit your build and performance goals. Have questions about IS360-1650H, port injection compatibility, fuel selection, or injector fitment? Email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
