Fuel Injector Clinic 1200cc Fuel Injector Set - High Z (2015 - 2024 Volkswagen Golf MK7 / MK8) IS360-1200H
Upgrade the supplemental fueling capability of your 2015-2024 Volkswagen Golf MK7 or MK8 with the Fuel Injector Clinic 1200cc High-Z Fuel Injector Set. Designed for applications using a compatible aftermarket intake manifold or port injection kit, the IS360-1200H includes four 1200cc high impedance ball and seat injectors engineered for excellent linearity, short pulse width repeatability, and precise fuel control. For modified Golf builds that need significantly more port injection capacity, this set combines substantial flow capability with the drivability and tunability expected from FIC, plus a plug-and-play fit to the OEM harness.
Every IS360-1200H injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered, and the included Data Match Sheet provides detailed flow matching and latency value information to support accurate ECU calibration. FIC flow tests and rates these injectors at 43.5 PSI (3 Bar) with fuel at 90 degrees F using calibration fluid. The injectors are supplied with the O-rings required for the listed application and are backed by Fuel Injector Clinic's lifetime warranty against failure caused by defects in original manufacture.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: IS360-1200H
- Flow Rate: 1200cc/min
- Quantity: Set of 4 injectors
- Impedance: High-Z / High Impedance
- Injector Type: Ball and seat
- Application: Aftermarket intake manifold or port injection kit
- Injector Matching: Fuel Injector Clinic Data Match Technology
- Injector Identification: Individually serial numbered
- Injector Data: Data Match Sheet included
- Flow Test Pressure: 43.5 PSI (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Wiring: Plug-and-play fit to OEM harness
- O-Rings: Includes O-rings required for the listed application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Four 1200cc high impedance ball and seat fuel injectors
- Designed for Volkswagen Golf MK7 and MK8 applications using a compatible aftermarket intake manifold or port injection kit
- Substantial fuel-flow capability for modified and higher-performance port injection systems
- Excellent linearity for consistent and predictable fuel delivery
- Strong short pulse width repeatability for precise injector operation
- Superior short pulse width control supports accurate tuning and excellent drivability
- Plug-and-play fit to the OEM harness
- Precisely matched using Fuel Injector Clinic's proprietary Data Match Technology
- Each injector is individually serial numbered for identification and matching
- Includes a detailed Data Match Sheet with flow matching and latency value information
- Flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using calibration fluid
- Includes the O-rings required for the listed application
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
Port Injection and Plug-and-Play Installation
The IS360-1200H is designed for Volkswagen Golf MK7 and MK8 applications equipped with a compatible aftermarket intake manifold or port injection kit. These injectors are intended for the port injection system and are not replacements for the vehicle's factory direct injectors. Fuel Injector Clinic specifies a plug-and-play fit to the OEM harness for this injector set, simplifying the electrical side of the installation.
Fuel Injector Clinic supplies the injectors with the O-rings required for the listed application. Because the IS360-1200H is intended for aftermarket intake manifold or port injection configurations, compatibility with the specific port injection hardware being used should be verified before ordering.
Fitment
- 2015 Volkswagen Golf MK7 / MK8 applications with compatible aftermarket intake manifold or port injection kit
- 2016 Volkswagen Golf MK7 / MK8 applications with compatible aftermarket intake manifold or port injection kit
- 2017 Volkswagen Golf MK7 / MK8 applications with compatible aftermarket intake manifold or port injection kit
- 2018 Volkswagen Golf MK7 / MK8 applications with compatible aftermarket intake manifold or port injection kit
- 2019 Volkswagen Golf MK7 / MK8 applications with compatible aftermarket intake manifold or port injection kit
- 2020 Volkswagen Golf MK7 / MK8 applications with compatible aftermarket intake manifold or port injection kit
- 2021 Volkswagen Golf MK7 / MK8 applications with compatible aftermarket intake manifold or port injection kit
- 2022 Volkswagen Golf MK7 / MK8 applications with compatible aftermarket intake manifold or port injection kit
- 2023 Volkswagen Golf MK7 / MK8 applications with compatible aftermarket intake manifold or port injection kit
- 2024 Volkswagen Golf MK7 / MK8 applications with compatible aftermarket intake manifold or port injection kit
FAQs
Are FIC IS360-1200H injectors replacements for the factory Golf MK7 or MK8 direct injectors?
No. The IS360-1200H set is designed for Volkswagen Golf MK7 and MK8 applications using a compatible aftermarket intake manifold or port injection kit. These injectors are intended for the additional port injection system rather than as replacements for the vehicle's factory direct injectors.
Does the Fuel Injector Clinic IS360-1200H set require injector wiring modifications?
No. Fuel Injector Clinic specifies the IS360-1200H as a plug-and-play fit to the OEM harness for the listed application. This eliminates the pigtail or injector plug conversion required with some other injector sizes in the Golf MK7 and MK8 product family.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
A properly built Golf MK7 or MK8 port injection system requires more than simply choosing an injector flow rate. The injectors, port injection hardware, fuel delivery system, wiring, and calibration all need to work together. Beefcake Racing can help you select the Fuel Injector Clinic injectors and supporting performance components that match your build and performance goals. Have questions about IS360-1200H, port injection compatibility, or injector fitment? Email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
