Fuel Injector Clinic 2150cc Fuel Injector Set - High Z (2013-2014 Hyundai Genesis 2.0T) (is191-2150h)
Feed a serious 2013-2014 Hyundai Genesis 2.0T build with the massive fueling capability of the Fuel Injector Clinic 2150cc High-Z Fuel Injector Set. Part number is191-2150h includes four 2150cc saturated, high-impedance injectors engineered to combine extreme flow capacity with the low-speed control needed for a properly tuned performance car. These injectors are a drop-in fit for both size and plug, while advanced dynamic flow matching and superior short pulse width control help maintain accurate fueling during idle and part-throttle operation.
Because controlling an injector this large at very short pulse widths presents unique challenges, Fuel Injector Clinic uses its proprietary Data Match Technology during production of the is191-2150h set. Dynamic flow matching significantly improves the ECU's ability to control these injectors in the sub 2 millisecond pulse width range commonly encountered at idle and part throttle. Each injector is individually serial numbered, and the included Data Match Sheet provides detailed flow matching and latency information. FIC flow tests and rates the injectors at 43.5 PSI (3 Bar) with fuel temperature maintained at 90 degrees F using CF-16B calibration fluid.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is191-2150h
- Injector Quantity: 4
- Flow Rating: 2150cc/min
- Injector Type: Saturated / high impedance
- Fit: Drop-in fit for size and plug
- Matching: Fuel Injector Clinic Data Match Technology dynamic flow matching
- Test Pressure: 43.5 PSI (3 Bar)
- Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- MTBE Fuel Compatibility: Not compatible with VP Import, Q16, or other MTBE oxygenated fuels
- Seals: Includes the O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Four massive 2150cc high-impedance fuel injectors for the 2013-2014 Hyundai Genesis 2.0T
- Drop-in fit for both injector size and electrical plug
- Designed to deliver very high fuel flow while retaining strong low-speed injector control
- Proprietary Data Match Technology provides advanced dynamic flow matching
- Dynamic matching improves ECU control in the sub 2 millisecond pulse width range
- Superior short pulse width control supports accurate fueling at idle and part throttle
- Each injector is individually serial numbered for identification and documentation
- Includes a Data Match Sheet with detailed flow matching and latency information
- Flow tested and rated at 43.5 PSI (3 Bar) and 90 degrees F fuel temperature
- Testing performed using CF-16B calibration fluid
- Includes the O-rings required for the listed factory application
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
Important Fuel Compatibility Warning
Do not use these 2150cc injectors with VP Import, Q16, or other MTBE oxygenated fuels. The internal construction of the 2150cc injector contains a seal that can swell when exposed to MTBE. This swelling can cause a significant reduction in injector flow, making the injector unsuitable for MTBE oxygenated fuels.
Care instructions should also be followed when these injectors are used with alcohol-based fuels such as E85. Fuel Injector Clinic warns that prolonged disuse while the injectors remain exposed to alcohol-based fuel can create potential corrosion issues. Proper fuel system care is especially important when a vehicle will be stored or left unused for extended periods.
Installation
The is191-2150h is a drop-in fit for both size and plug on the listed factory application, eliminating the injector plug conversion required with some other FIC injector sets for this platform. The injectors are supplied with the O-rings necessary for the factory application. If your Genesis 2.0T uses an aftermarket fuel rail or another unusual fuel system configuration, contact Beefcake Racing before ordering to verify proper fitment.
Fitment
- 2013 Hyundai Genesis 2.0T
- 2014 Hyundai Genesis 2.0T
FAQs
Are the Fuel Injector Clinic is191-2150h injectors a drop-in fit?
Yes. Fuel Injector Clinic specifies the is191-2150h as a drop-in fit for both injector size and electrical plug on the 2013-2014 Hyundai Genesis 2.0T. The injectors also include the O-rings required for the listed factory application.
Can FIC 2150cc injectors be used with Q16 or VP Import race fuel?
No. Do not use these injectors with Q16, VP Import, or other MTBE oxygenated fuels. Fuel Injector Clinic states that MTBE can cause an internal seal to swell, significantly reducing injector flow. Care instructions should also be followed when using alcohol-based fuels such as E85, particularly before extended periods of vehicle storage.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing specializes in high-performance fuel systems and can help you choose the correct injectors and supporting components for your Hyundai Genesis 2.0T. When you are stepping up to an injector with the capacity of the FIC 2150cc, getting the complete fuel system and calibration combination right matters. Contact our performance specialists with questions about injector sizing, fuel compatibility, aftermarket fuel system fitment, or your specific build.
Email: sales@beefcakeracing.com
Phone: 1-855-827-7223
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
