Fuel Injector Clinic 1200cc (Previously 1100cc) Fuel Injector Set - High Z (2013-2014 Hyundai Genesis 2.0T) (is191-1200h)
Upgrade the fueling capability of your 2013-2014 Hyundai Genesis 2.0T with the Fuel Injector Clinic 1200cc High-Z Fuel Injector Set. Part number is191-1200h, previously offered as is191-1100h, includes four 1200cc saturated, high-impedance ball and seat injectors engineered for serious performance applications. With substantial fuel flow, superior short pulse width control, and Fuel Injector Clinic's advanced Data Match Technology, this injector set delivers the precise, repeatable fuel delivery tuners need while maintaining excellent drivability.
Fuel Injector Clinic precisely matches the is191-1200h set using its proprietary Data Match Technology. Each injector is individually serial numbered, and the included Data Match Sheet provides detailed flow matching and latency information for the specific injectors in your set. FIC flow tests and rates these injectors at 43.5 PSI (3 Bar) with fuel temperature maintained at 90 degrees F using CF-16B calibration fluid. State-of-the-art matching and strong short pulse width control help provide predictable injector behavior for accurate calibration from idle and part throttle through higher-load operation.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is191-1200h
- Previous Part Number: is191-1100h
- Injector Quantity: 4
- Flow Rating: 1200cc
- Injector Type: Saturated / high impedance
- Injector Design: Ball and seat
- Matching: Fuel Injector Clinic Data Match Technology
- Test Pressure: 43.5 PSI (3 Bar)
- Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Wiring: PGTJETR4Q solder-in pigtails
- Optional Wiring Adapter: PADPJtoD4 plug-and-play adapters
- Seals: Includes the O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Four 1200cc high-impedance fuel injectors for the 2013-2014 Hyundai Genesis 2.0T
- Previously offered as the Fuel Injector Clinic is191-1100h injector set
- Saturated, high-impedance ball and seat injector design
- Proprietary Data Match Technology provides precise injector set matching
- Each injector is individually serial numbered for identification and documentation
- Includes a Data Match Sheet with detailed flow matching and latency information
- Superior short pulse width control supports accurate low-flow fueling and excellent drivability
- State-of-the-art matching helps provide predictable injector behavior for accurate tuning
- Flow tested and rated at 43.5 PSI (3 Bar) and 90 degrees F fuel temperature
- Testing performed using CF-16B calibration fluid
- Includes PGTJETR4Q solder-in pigtails for the required injector connector conversion
- Optional PADPJtoD4 plug-and-play adapters allow installation without cutting or soldering the factory wiring harness
- Supplied with the O-rings required for the listed factory application
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
Wiring and Installation
The is191-1200h injector set requires a change to the injector connectors on the vehicle's wiring harness. PGTJETR4Q pigtails are included and can be soldered into the factory harness to replace the original injector connectors. If you prefer an installation without cutting or soldering the factory wiring, optional PADPJtoD4 plug-and-play adapters can be used to connect the injectors to the original harness.
Fuel Injector Clinic uses brand-new, unused injectors for its performance applications rather than relying on remanufactured or core-program injectors. The injectors are configured with the O-rings required for the listed factory application. If your Hyundai Genesis 2.0T uses an aftermarket fuel rail or another non-standard fuel system configuration, contact Beefcake Racing before ordering to verify proper injector fitment.
Fitment
- 2013 Hyundai Genesis 2.0T
- 2014 Hyundai Genesis 2.0T
FAQs
Is the Fuel Injector Clinic is191-1200h the replacement for the older is191-1100h injector set?
Yes. Fuel Injector Clinic identifies the current 1200cc is191-1200h injector set as the product previously offered as is191-1100h. The current injector set is rated at 1200cc.
Do these 1200cc injectors require changes to the factory Hyundai wiring?
Yes. PGTJETR4Q solder-in pigtails are included for converting the injector connectors. If you prefer not to cut or solder the factory wiring harness, optional PADPJtoD4 plug-and-play adapters can be purchased for the installation.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing specializes in high-performance fuel system upgrades and can help you select the right injectors and supporting components for your Hyundai Genesis 2.0T. Whether you need help with injector sizing, wiring adapters, aftermarket fuel system compatibility, or choosing the right components for your performance goals, our specialists can help you put together the right combination for your build.
Email: sales@beefcakeracing.com
Phone: 1-855-827-7223
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
