Fuel Injector Clinic 2150cc High-Z Fuel Injector Set (is190-2150h) - 2010-2012 Hyundai Genesis 2.0T
Feed a serious 2010-2012 Hyundai Genesis 2.0T build with the massive fuel capacity of the Fuel Injector Clinic 2150cc High-Z Fuel Injector Set. Part number is190-2150h includes four 2150cc/min saturated, high-impedance injectors engineered to combine extreme fuel flow with the precise low-pulse-width control needed for strong idle and part-throttle performance. Even better, this application is a drop-in fit for both injector size and electrical plug, making it a clean solution for high-horsepower Genesis 2.0T builds that demand substantially more fuel.
Because controlling an injector this large at low pulse widths requires exceptional consistency, Fuel Injector Clinic uses its proprietary Data Match Technology with dynamic flow matching during production. This significantly improves the ECU's ability to control the injectors in the sub-2ms pulse width range commonly encountered during idle and part-throttle operation. Each injector is individually serial numbered, with detailed flow matching and latency information supplied on the included Data Match Sheet. FIC flow tests and rates these injectors at 43.5 PSI (3 Bar) using CF-16B calibration fluid maintained at 90 degrees F.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is190-2150h
- Application: 2010-2012 Hyundai Genesis 2.0T
- Injector Quantity: 4
- Flow Rating: 2150cc/min
- Impedance: High impedance / High-Z
- Operation: Saturated
- Fitment: Drop-in fit for injector size and electrical plug
- Matching: Fuel Injector Clinic Data Match Technology with dynamic flow matching
- Testing Pressure: 43.5 PSI (3 Bar)
- Testing Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- MTBE Compatibility: Not compatible with VP Import, Q16, or other MTBE oxygenated fuels
- O-Rings: Included for the intended factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Four massive 2150cc/min injectors for high-output 2010-2012 Hyundai Genesis 2.0T builds
- Saturated, high-impedance injector design
- Drop-in fit for both injector size and electrical plug
- Exceptional fuel-flow capability for applications with substantial fuel demands
- Excellent low-pulse-width control despite the extremely high flow capacity
- Dynamic flow matching improves ECU control in the sub-2ms pulse width range
- Proprietary Fuel Injector Clinic Data Match Technology
- Each injector is individually serial numbered
- Included Data Match Sheet provides detailed flow matching and latency information
- Superior short pulse width control supports easier tuning and excellent drivability
- Flow tested and rated at 43.5 PSI (3 Bar)
- Tested with CF-16B calibration fluid maintained at 90 degrees F
- Includes the O-rings required for the intended factory application
- Suitable for E85 and other compatible high-volume fuels when proper injector care procedures are followed
- Fuel Injector Clinic uses brand-new injectors rather than remanufactured or core-program injectors
- Covered by Fuel Injector Clinic's lifetime warranty against failures caused by original manufacturing defects
Important Fuel Compatibility Information
Do not use the is190-2150h injectors with VP Import, Q16, or other MTBE oxygenated fuels. The internal construction of the 2150cc/min injector contains a seal that can swell when exposed to MTBE. This can significantly reduce injector flow and makes the injector unsuitable for MTBE oxygenated fuels. When using alcohol-based fuels such as E85, follow Fuel Injector Clinic's injector care recommendations because prolonged disuse while the injectors remain exposed to alcohol-based fuel can create potential corrosion issues.
Fitment
- 2010 Hyundai Genesis 2.0T
- 2011 Hyundai Genesis 2.0T
- 2012 Hyundai Genesis 2.0T
The is190-2150h is designed as a drop-in fit for both injector size and electrical plug on the listed Genesis 2.0T application, eliminating the connector conversion required by some other FIC injector options. Fuel Injector Clinic supplies the O-rings needed for the intended factory application. If your Genesis uses an aftermarket fuel rail or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to verify proper injector fitment.
FAQs
Can a 2150cc injector still provide good idle and part-throttle control?
Yes. Fuel Injector Clinic uses Data Match Technology with dynamic flow matching specifically to improve ECU control of these extremely high-flow injectors in the sub-2ms pulse width range commonly encountered at idle and part throttle. Combined with accurate calibration, this allows the is190-2150h to deliver massive fuel capacity without sacrificing the low-pulse-width control required for good drivability.
Can I run Q16 or VP Import with the is190-2150h injectors?
No. Fuel Injector Clinic specifically states that its 2150cc injector must not be used with VP Import, Q16, or other MTBE oxygenated fuels. MTBE can cause an internal seal to swell, significantly reducing injector flow. E85 can be used, but FIC's care recommendations should be followed to help prevent potential corrosion during prolonged periods of disuse.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
When your Genesis 2.0T needs 2150cc injectors, the rest of the fuel system and calibration need to be ready for that level of fuel delivery as well. Beefcake Racing can help you determine whether the Fuel Injector Clinic is190-2150h is the right choice for your combination and make sure your injector selection matches your fuel, power goals, and supporting fuel-system upgrades. For fitment, fuel-system, or ordering assistance, email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
