Fuel Injector Clinic 1650cc High-Z Fuel Injector Set (is190-1650h) - 2010-2012 Hyundai Genesis 2.0T
Build your 2010-2012 Hyundai Genesis 2.0T fuel system around serious flow capacity without giving up the control needed for a street-driven performance car. The Fuel Injector Clinic is190-1650h includes four 1650cc/min saturated, high-impedance ball-and-seat injectors engineered to support high-horsepower combinations on both gasoline and E85 while maintaining excellent idle performance. For powerful turbocharged Genesis 2.0T builds that need substantially more fuel than smaller injectors can deliver, FIC's 1650cc set combines massive flow capability with the precise injector behavior needed for accurate tuning and strong drivability.
Stainless alloy valve construction gives the 1650cc injector exceptionally broad fuel compatibility, including pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. Each set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Every injector is individually serial numbered, and detailed flow matching and latency information is supplied on the included Data Match Sheet. FIC flow tests and rates these injectors at 43.5 PSI (3 Bar) using CF-16B calibration fluid maintained at 90 degrees F.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is190-1650h
- Application: 2010-2012 Hyundai Genesis 2.0T
- Injector Quantity: 4
- Flow Rating: 1650cc/min
- Injector Type: Ball-and-seat
- Impedance: High impedance / High-Z
- Operation: Saturated
- Valve Construction: Stainless alloy
- Fuel Compatibility: Pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Matching: Fuel Injector Clinic Data Match Technology
- Testing Pressure: 43.5 PSI (3 Bar)
- Testing Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Pigtails: PGTJETR4Q
- Optional Plug-and-Play Adapters: PADPJtoD4
- O-Rings: Included for the intended factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Four 1650cc/min performance fuel injectors for the 2010-2012 Hyundai Genesis 2.0T
- High-impedance saturated injector design
- Ball-and-seat construction
- Massive fuel-flow capability for high-horsepower turbocharged Genesis 2.0T builds
- Excellent idle performance for street-driven applications when properly calibrated
- Designed to support high-output combinations running gasoline or E85
- Stainless alloy valve construction provides broad fuel compatibility
- Compatible with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Proprietary Data Match Technology provides precise injector-to-injector matching
- Each injector is individually serial numbered
- Included Data Match Sheet provides detailed flow matching and latency information
- Superior short pulse width control supports accurate tuning and excellent drivability
- Flow tested and rated at 43.5 PSI (3 Bar)
- Tested using CF-16B calibration fluid maintained at 90 degrees F
- Includes PGTJETR4Q solder-in pigtails
- Optional PADPJtoD4 plug-and-play adapters allow installation without cutting or soldering the factory harness
- Includes the O-rings required for the intended factory application
- Fuel Injector Clinic uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Covered by Fuel Injector Clinic's lifetime warranty against failures caused by original manufacturing defects
Fitment
- 2010 Hyundai Genesis 2.0T
- 2011 Hyundai Genesis 2.0T
- 2012 Hyundai Genesis 2.0T
The is190-1650h injector set requires an injector connector change when used with the factory wiring harness. PGTJETR4Q solder-in pigtails are included and can be used to replace the existing injector connectors. Optional PADPJtoD4 plug-and-play adapters provide the required connector conversion without cutting or soldering the factory harness. Fuel Injector Clinic supplies the O-rings required for the intended factory application. If your Genesis 2.0T uses an aftermarket fuel rail or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to verify proper injector fitment.
FAQs
What fuels can I run with the Fuel Injector Clinic is190-1650h injectors?
The FIC 1650cc high-impedance injectors use stainless alloy valve construction and are compatible with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. This broad compatibility makes them well suited to powerful Genesis 2.0T builds that may use different fuels for street, track, or competition use.
Can 1650cc injectors still provide good drivability in a street-driven Genesis 2.0T?
Yes. Fuel Injector Clinic specifically designed its 1650cc high-impedance injector to provide excellent idle performance while delivering the fuel capacity required for high-horsepower applications. Data Match Technology, precise injector matching, and superior short pulse width control help provide predictable fuel delivery at idle and part throttle when the engine is properly calibrated.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
When a Genesis 2.0T build requires 1650cc injectors, injector sizing is only one piece of the fuel-system equation. Fuel choice, pump capacity, electrical connections, supporting components, and calibration all need to work together. Beefcake Racing can help you determine whether the Fuel Injector Clinic is190-1650h is the right injector for your combination and make sure you order the proper connection option. For fitment, fuel-system, or ordering assistance, email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
