Fuel Injector Clinic 1440cc Fuel Injector Set - High Z (2010-2012 Hyundai Genesis 2.0T) (is190-1440h)
Step up the fueling capability of your 2010-2012 Hyundai Genesis 2.0T with the Fuel Injector Clinic 1440cc High-Z Fuel Injector Set. Part number is190-1440h includes four 1440cc saturated, high-impedance ball and seat injectors designed to deliver the fuel capacity needed for serious performance combinations without sacrificing the control required for a street-driven car. Positioned between FIC's 1200cc and 1650cc offerings, the 1440cc injector combines substantial flow capability with excellent idle performance, strong short pulse width control, and predictable operation on both gasoline and E85.
Built with a stainless alloy valve construction, these 1440cc injectors are compatible with a broad range of fuels, including pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. Fuel Injector Clinic precisely matches each set using its proprietary Data Match Technology. Every injector is individually serial numbered, and the included Data Match Sheet provides detailed flow matching and latency information for the specific injectors in your set. FIC flow tests and rates these injectors at 43.5 PSI (3 Bar) with fuel temperature maintained at 90 degrees F using CF-16B calibration fluid.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is190-1440h
- Injector Quantity: 4
- Flow Rating: 1440cc/min
- Injector Type: Saturated / high impedance
- Injector Design: Ball and seat
- Valve Construction: Stainless alloy
- Matching: Fuel Injector Clinic Data Match Technology
- Test Pressure: 43.5 PSI (3 Bar)
- Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Fuel Compatibility: Pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Included Wiring: PGTUSC4 solder-in pigtails
- Optional Wiring Adapter: PADPUtoD4 plug-and-play adapters
- Seals: Includes the O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Four 1440cc high-impedance injectors for the 2010-2012 Hyundai Genesis 2.0T
- High-flow design supports higher-horsepower applications on gasoline and E85
- Excellent idle performance makes the 1440cc injector well suited to powerful street-driven combinations
- Stainless alloy valve construction provides compatibility with a broad range of gasoline, ethanol, and race fuels
- Compatible with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Proprietary Data Match Technology provides precise injector set matching
- Each injector is individually serial numbered for identification and documentation
- Includes a Data Match Sheet with detailed flow matching and latency information
- Superior short pulse width control supports accurate tuning and excellent drivability
- Flow tested and rated at 43.5 PSI (3 Bar) and 90 degrees F fuel temperature
- Testing performed using CF-16B calibration fluid
- Includes PGTUSC4 solder-in pigtails for the required injector connector conversion
- Optional PADPUtoD4 plug-and-play adapters allow installation without cutting or soldering the factory wiring harness
- Supplied with the O-rings required for the listed factory application
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
Wiring and Installation
This injector set requires a change to the injector connectors on the vehicle's wiring harness. PGTUSC4 pigtails are included and can be soldered into the factory harness to replace the existing injector connectors. For an installation that does not require cutting or soldering the factory wiring, optional PADPUtoD4 plug-and-play adapters can be used to connect the injectors to the original harness.
Fuel Injector Clinic uses brand-new, unused injectors for its performance applications rather than relying on remanufactured or core-program injectors. The injectors are configured with the O-rings required for the listed factory application. If your Genesis 2.0T uses an aftermarket fuel rail or another non-standard fuel system configuration, contact Beefcake Racing before ordering to verify proper fitment.
Fitment
- 2010 Hyundai Genesis 2.0T
- 2011 Hyundai Genesis 2.0T
- 2012 Hyundai Genesis 2.0T
FAQs
What fuels can the Fuel Injector Clinic 1440cc injectors run?
The stainless alloy valve construction allows these injectors to be used with a wide range of fuels. Fuel Injector Clinic specifies compatibility with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels.
Do the is190-1440h injectors require modification to the factory wiring?
The injector connector must be converted for installation. PGTUSC4 solder-in pigtails are included with the set. Optional PADPUtoD4 plug-and-play adapters can be purchased if you prefer to install the injectors without cutting or soldering the factory wiring harness.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing specializes in performance fuel system upgrades and can help you put together the right combination for your Hyundai Genesis 2.0T. Whether you have questions about injector sizing, fuel compatibility, wiring adapters, or aftermarket fuel system fitment, our performance specialists can help you select the right components for your build.
Email: sales@beefcakeracing.com
Phone: 1-855-827-7223
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
