Fuel Injector Clinic 1200cc High-Z Fuel Injector Set (is190-1200h) - 2010-2012 Hyundai Genesis 2.0T
Give your 2010-2012 Hyundai Genesis 2.0T the fuel capacity needed for a serious performance build with the Fuel Injector Clinic 1200cc High-Z Fuel Injector Set. Part number is190-1200h includes four 1200cc/min saturated, high-impedance ball-and-seat injectors designed to combine substantial fuel flow with excellent linearity, precise short pulse width control, and predictable drivability. Previously offered as the is190-1100h, this updated 1200cc set gives modified Genesis 2.0T owners increased fueling capability backed by FIC's precise injector matching and detailed calibration data.
Fuel Injector Clinic uses its proprietary Data Match Technology to precisely match the injectors as a set. Each injector is individually serial numbered, and detailed flow matching and latency information is provided on the included Data Match Sheet. FIC flow tests and rates these injectors at 43.5 PSI (3 Bar) using CF-16B calibration fluid maintained at 90 degrees F. Superior short pulse width control and state-of-the-art matching help provide the consistency tuners need for accurate calibration while maintaining excellent drivability when properly tuned.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is190-1200h
- Previous Part Number: is190-1100h
- Application: 2010-2012 Hyundai Genesis 2.0T
- Injector Quantity: 4
- Flow Rating: 1200cc/min
- Injector Type: Ball-and-seat
- Impedance: High impedance / High-Z
- Operation: Saturated
- Matching: Fuel Injector Clinic Data Match Technology
- Testing Pressure: 43.5 PSI (3 Bar)
- Testing Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Pigtails: PGTJETR4Q
- Optional Plug-and-Play Adapters: PADPJtoD4
- O-Rings: Included for the intended factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Four 1200cc/min performance fuel injectors for the 2010-2012 Hyundai Genesis 2.0T
- Updated 1200cc injector set previously sold under part number is190-1100h
- Saturated, high-impedance injector design
- Ball-and-seat injector construction
- High fuel-flow capacity for modified and high-output Genesis 2.0T combinations
- Excellent linearity for consistent and predictable fuel delivery
- Superior short pulse width control helps maintain excellent drivability when properly calibrated
- Proprietary Data Match Technology provides precise injector-to-injector matching
- Each injector is individually serial numbered
- Included Data Match Sheet provides detailed flow matching and latency information
- Flow tested and rated at 43.5 PSI (3 Bar)
- Tested using CF-16B calibration fluid maintained at 90 degrees F
- Includes PGTJETR4Q solder-in pigtails
- Optional PADPJtoD4 plug-and-play adapters eliminate the need to cut or solder the factory wiring harness
- Includes the O-rings required for the intended factory application
- Fuel Injector Clinic uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Covered by Fuel Injector Clinic's lifetime warranty against failures caused by original manufacturing defects
Fitment
- 2010 Hyundai Genesis 2.0T
- 2011 Hyundai Genesis 2.0T
- 2012 Hyundai Genesis 2.0T
The is190-1200h injector set requires an injector connector change when used with the factory wiring harness. PGTJETR4Q solder-in pigtails are included and can be used to replace the existing injector connectors. Optional PADPJtoD4 plug-and-play adapters provide the required connector conversion without cutting or soldering the factory harness. Fuel Injector Clinic supplies the O-rings required for the intended factory application. If your Genesis 2.0T uses an aftermarket fuel rail or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to verify proper injector fitment.
FAQs
Is the Fuel Injector Clinic is190-1200h the replacement for the older is190-1100h injector set?
Yes. Fuel Injector Clinic identifies the is190-1200h 1200cc injector set as the updated offering previously sold as is190-1100h. The current part number to order for this application and flow range is is190-1200h.
Do the is190-1200h injectors plug directly into the factory Genesis 2.0T wiring harness?
The injector connector must be converted. The set includes PGTJETR4Q solder-in pigtails, or optional PADPJtoD4 plug-and-play adapters can be used to connect the injectors without cutting or soldering the factory wiring harness.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Choosing injectors for a modified Genesis 2.0T means matching fuel capacity, electrical connections, supporting fuel-system components, and calibration to your power goals. Beefcake Racing can help you determine whether the Fuel Injector Clinic is190-1200h is the right injector for your combination and make sure you order the proper connection option for your installation. For fitment, fuel-system, or ordering assistance, email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
