Fuel Injector Clinic 775cc High-Z Fuel Injector Set (is190-0775h) - 2010-2012 Hyundai Genesis 2.0T
Step up the fueling capability of your 2010-2012 Hyundai Genesis 2.0T with the Fuel Injector Clinic 775cc High-Z Fuel Injector Set. Part number is190-0775h includes four 775cc/min modified saturated, high-impedance ball-and-seat injectors designed to deliver the additional fuel capacity performance builds demand while maintaining excellent linearity, short pulse width control, and drivability. Whether your Genesis 2.0T is a quick street car or a more serious turbocharged build, these injectors give your tuner precise, consistent fuel delivery to work with.
Fuel Injector Clinic uses proprietary Data Match Technology to precisely match the injectors in each set. Every injector is individually serial numbered, and its results are documented on the included Data Match Sheet with detailed flow matching and latency information. FIC flow tests and rates these injectors at 43.5 PSI (3 Bar) using CF-16B calibration fluid maintained at 90 degrees F. Superior short pulse width control and precise matching help provide predictable injector behavior during calibration and excellent drivability when properly tuned.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is190-0775h
- Application: 2010-2012 Hyundai Genesis 2.0T
- Injector Quantity: 4
- Flow Rating: 775cc/min
- Injector Type: Modified ball-and-seat
- Impedance: High impedance / High-Z
- Operation: Modified saturated
- Matching: Fuel Injector Clinic Data Match Technology
- Testing Pressure: 43.5 PSI (3 Bar)
- Testing Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Pigtails: PGTUSC4
- Optional Plug-and-Play Adapters: PADPUtoD4
- O-Rings: Included for the intended factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Four 775cc/min performance fuel injectors for the 2010-2012 Hyundai Genesis 2.0T
- Modified saturated, high-impedance injector configuration
- Ball-and-seat injector design
- Increased fuel-flow capacity for modified and higher-output Genesis 2.0T builds
- Excellent linearity for consistent and predictable fuel delivery
- Strong short pulse width repeatability for precise injector operation
- Superior short pulse width control helps maintain excellent drivability when properly calibrated
- Proprietary Data Match Technology provides precise injector-to-injector matching
- Each injector is individually serial numbered
- Included Data Match Sheet provides detailed flow matching and latency information
- Flow tested and rated at 43.5 PSI (3 Bar)
- Tested using CF-16B calibration fluid maintained at 90 degrees F
- Includes PGTUSC4 solder-in pigtails
- Optional PADPUtoD4 plug-and-play adapters eliminate the need to cut or solder the factory harness
- Includes the O-rings required for the intended factory application
- Fuel Injector Clinic uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Covered by Fuel Injector Clinic's lifetime warranty against failures caused by original manufacturing defects
Fitment
- 2010 Hyundai Genesis 2.0T
- 2011 Hyundai Genesis 2.0T
- 2012 Hyundai Genesis 2.0T
The is190-0775h injector set requires an injector connector change when used with the factory wiring harness. PGTUSC4 solder-in pigtails are included and can be used to replace the existing injector connectors. Optional PADPUtoD4 plug-and-play adapters provide the required conversion without cutting or soldering the factory harness. Fuel Injector Clinic supplies the O-rings required for the intended factory application. If your Genesis 2.0T uses an aftermarket fuel rail or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to verify proper injector fitment.
FAQs
What does Fuel Injector Clinic Data Match Technology provide with the is190-0775h injector set?
FIC uses its proprietary Data Match Technology to precisely match the injectors as a set. Each injector is individually serial numbered, and the supplied Data Match Sheet provides detailed flow matching and latency information. This gives your tuner accurate injector data and consistent injector-to-injector performance for calibration.
Do the is190-0775h injectors plug directly into the factory Genesis 2.0T wiring harness?
The injector connector must be converted. PGTUSC4 solder-in pigtails are included with the injector set, or optional PADPUtoD4 plug-and-play adapters can be used to make the connection without cutting or soldering the factory wiring harness.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Getting the right injectors for a modified Genesis 2.0T means considering injector capacity, electrical connections, the rest of the fuel system, and your tuning goals together. Beefcake Racing can help you determine whether the Fuel Injector Clinic is190-0775h is the right match for your build and make sure you order the proper connection option for your installation. For fitment, fuel-system, or ordering assistance, email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
